my friend wants me to spoa his sammy, what do i need to get? and where to find the stuff.

i know you need shocks, pitman arm, spring perches...

what does the driveshaft spacer do? and where do you find it? do you guys use CV shafts?

what about the chevy braklines? what vehicle? what year?

thanks guys i appreciate it <IMG SRC="smilies/smile.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0">

Try Here: http://www.petroworks.com

First if you are going to do a spring over go with YJ's!! Use some big spring pads from Rubicon Express (anti Wrap), In stead of using a spacer why dont you go with the 2" Longer slip yoke from Trail Tough. You will also need a 4" Drop pitman arm and some sort of steering...High Steer,Zlink, or the calmini steering. Just buy longer brake lines from Petroworks or something like that(steel Braided).
For spring perches, those are pretty damn easy to make or you can take a couple of old YJ springs and cut the eyes off and use those for the Shackle hangers.
Shocks go with the 9000's!! (9012's) You wont be sorry there! but you will have to make custom mounts front and back, and the back tilt them in at a 45* and they should be at about 25" after mounting.
good luck.

thanks guys, i don't care what those other boards say about you <IMG SRC="smilies/clown.gif" border="0">

later <IMG SRC="smilies/usa.gif" border="0">

What other boards <IMG SRC="smilies/question.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">

Originally posted by brimy311:
<STRONG>thanks guys, i don't care what those other boards say about you <IMG SRC="smilies/clown.gif" border="0">

later <IMG SRC="smilies/usa.gif" border="0"></STRONG>

Lets hear it... <IMG SRC="smilies/smile.gif" border="0">

sHANE SAY IT GOOD <IMG SRC="smilies/biggrin.gif" border="0">

S <IMG SRC="smilies/biggrin.gif" border="0">