i'm kinda a newb to sammis, but i'm building one and i've heard that some guys put a tracker transfer case so you can run dual transfer cases. does anyone know if you can mate the tracker transfer case up to the stock trans? if so, any pics or tips? thanks!

Yea ya can....Rock Rat makes an adapter for that I do believe.
The tracker tranny is bigger than the sami unit, so you'll need a body lift, or cut the tranny tunnel to make it fit.

i've heard that some guys put a tracker transfer case so you can run dual transfer cases. does anyone know if you can mate the tracker transfer case up to the stock trans? if so, any pics or tips? thanks!

This is a Track/Kick trans/rangebox with a Zuk case.


http://i5.photobucket.com/albums/y174/TatorZuk/kicker20three20cutout.jpg


OTT Industries...http://www.ottindustries.com/kicker3.htm

sorry , what i meant was that i would try to put a tracker (or sidekick) transfercase between the sammi transfer case and sammi transmission. thanks for all the help

it would prolly be easier and cheaper to use the tracker tranny since it's a direct bolt in, bigger flywheel, clutch and gear box means it's alot stronger.

oh, ok, so the tracker trans bolts to the sammi engine directly? is there an adapter plate needed? thanks

oh, ok, so the tracker trans bolts to the sammi engine directly? is there an adapter plate needed? thanks
You need an adapter, talk to Rockrat, he has 'em. I think it is called the lucky 13 and costs about $60.

BTW I have a 91 kick 5 speed and TC, with drive shafts for sale for 100.00 complete. with a good clutch assembly

how much to ship to 95630?

how much to ship to 95630?

I will try to weigh it tomorrow, im betting in the 100.00 range though

ok, thanks