Anyone know of one or where to get one made?

tried bending mine,didn't bend much
been told droped arms put alot of load on the box better to raise the steering

I just put D44's and High steer on, but i was trying to get the angle of the draglink down....right now im about 8*, i know that when you put high steer on, you want to be as flat as possible....If I could drop the pitman arm 2-3" that would make a world of difference.

INTERESTING <IMG SRC="smilies/biggrin.gif" border="0">

What type of high steer arms did you use? Some are much higher than others, I just finished doing the same thing.

I used the ones from Extreme Gear Offroad....I know Scott over there..They are pretty cool arms though!

need visiuals <IMG SRC="smilies/biggrin.gif" border="0">

all words no pic's very dull <IMG SRC="smilies/biggrin.gif" border="0">

ill take some tonight and post them tomorrow....nothing exciting to show with springs and axles laying on the floor!
Changin over to Wagoneers!!!

Those ARE nice arms, but I believe they are flat...right? Roggy and OTT make some that are lifted a bit extra to take out the angle an clear arched springs. They might work out a little better if you can't get yours to work out.

Check these out!
<IMG width=512 height=440 SRC="http://www.pirate4x4.com/ubb/uploads/danahl.jpg">

LESS DULL NOW <IMG SRC="smilies/biggrin.gif" border="0">

Originally posted by scwafish:
<STRONG>Check these out!
<IMG width=512 height=440 SRC="http://www.pirate4x4.com/ubb/uploads/danahl.jpg"></STRONG>
heh scwafish,
Are thoose the OTT arms?

Here you go, these are the arms that im using...they are lifted and the end is turned up for the draglink..

<IMG width=480 height=360 SRC="http://www.pirate4x4.com/ubb/uploads/danaarms.jpg">
<IMG SRC="smilies/jeep2.gif" border="0">

brakes look a little whimpy <IMG SRC="smilies/biggrin.gif" border="0">

Ammelk-yep those are OTT arms

Rude-I see the twist but not the lift, in the picture the look thick, but without and vertical offset. They do look sweeeet though!

Originally posted by bobaki:
<STRONG>brakes look a little whimpy <IMG SRC="smilies/biggrin.gif" border="0"></STRONG>
Lucky those arent mine huh!!! I actually have the wagoneer front calipers and change the front over to a 77 F150 rotor and hub assembly....much beefier and I got to keep 5x5.5!!
Dont have pics of that yet...sorry maybe tonight??

don't tease me <IMG SRC="smilies/biggrin.gif" border="0">

Just as an update to everyone...I can get Pitman arms made for us!!! They are about 130 or so, but they are made with either a ford or a J**p drop pitman arm....They machine out the inners of the Sidekick one and the place in the other arm....Ill post pics when i get my new arm.

Cool!