Yukon Axle Packages *Ring/Pinion/Install Kit Axle Shafts*

[machinewave]

We are now putting together Axle Builder Packages ... give us a call or PM for the ABSOLUTE lowest price on YUKON ring&pinions, master overhaul kits and Chromoly Axle Shafts.

Many domestic and foreign applications to choose from ... Keep in mind _machinewave will meet or beat anyone's price ...

Most products in stock, ready to ship ... at your door within 3 days (Generally)

_machinewave 812.623.3473

[NakedDucks]

Front HP D60 5.13's and rear ones as well.....along w/ some master install kits....

[installationsplus]

How much for a set of 4:88s for a 79 front Scout 44 with chromo axles and some good U-joints? Also a set of 4:88s, full spool, and install kit for a Ford 9", all shipped to CT, 06019? Oh Yea, got the Rancho's, fast service and great price, Thanks Hank.

[cameron_garrison]

can i get a quote for 5.13 ring and pinion package for a dana 44 out of a 80-85 jeep wagoneer non vacum disconect thanks
cameron

[bjb]

quote:Dana 44, early bronco long inner (27.94, big joint), 80-84 wagoneer short inner (15.80) and two Chev/wagoneer outers along with a set of joints. to 95624
Thanks
Barry

[beano]

Can I get a quote on a set of 5.29s for a 8" 4cyl toyota and a set for 8" V6 toyota and set up kits.

Ben

[rpraterxj]

87 Jeep Cherokee Dana 30 front, Dana 44 rear: 4.56 gears, master install kits

[machinewave]

pm`ed

[DevilJeep]

D30 and D35 4.88's with install kits...thx
edit: shipped to 85037

[patchzx7r]

Gears set and Master instal kit for Dynatrac HP60 4:88's. shipped to 80233

[hawk2769]

Dana 30 front, Dana 44 rear, 488 r&p + master install shipped to 46342

[ROCSTARR]

Dana 44hp, Dana 60: 5.13's master installs front Chro-mo's inners & outers to 50322

[lilgreenjeepyj]

Price on an 89 GWaggy rear 44 with 5.38s. Axles, Master and R&P please.:D

[Ryanstrucking]

price on 586 gears for a GM dana 60 (front) and instal kit.
shipped to 48060 please.
Thanx
Ryan

[orvpark]

how about a set of cromo's a good joints for an late model (89'ish) non-disco waggy shipped to 71901

[geberhard]

Hi, Please quote Chromo axles shafts for dana 44 F250 HP 1979 shipped to CA 94583. How much stronger than stocks? Also please quote price on u-joint offerings, which ones you have?

Thanks,

Gui

[hexal]

79 Ford f250 Dana 44hp, Dana 70u from a 86' ford f350: 5.13's R&P, master installs, front Chro-mo's inners & outers to 80209

Thanks!

[xjoffroad]

price on 5.13 front and rear gears with install kits. cromo inners and outers with super joints for a waggy d44 front.

[92toy21]

Front dana 44, need 4.88's and an arb in there what can you get me?????

[RockRanger]

Inner and outer axle shafts for a 84 waggoneer axle. zip is 92111

[4TACXOMA4]

Inners and outers for a Waggy d44 front, Super Joints, 4.88's, and instal kit...shipped to 98926. What can ya do?

[MocKKnight]

2 sets of 5.29's and overhaulkits shipped to a buisness adress in 98004

[USMCracing]

Toy
V6 5.29 x2
1 v6 master install kit
Toy
V6 Detriot

If I wanted to go 5.71s instead of the 5.29s is there a diff in price. How much for shipping to 32244.

Thanks

[jwtrapper]

Cherokee D30 and 8.25 R&P 4.56 master install kits and a pair or Detroit TrueTracks to 81007?

[elarsen]

Install kit for rear D44 76 waggy shipped to 95451, kelseyville,ca

[machinewave]

pm`ed

[ramsey]

inner and outers for xj dana 30 to 71115

thanks

[GOOBAWIGGA]

Quote for 79hp ford dana 60 reverse rotation, need 5.13gears a detroit, and master install and inner and outer 4340 cromos 35 spline shipped to 95687, vacaville ca

[NakedDucks]

Quote for 79hp ford dana 60 reverse rotation, need 5.13gears a detroit, and master install and inner and outer 4340 cromos 35 spline shipped to 95687, vacaville ca'

Same here :smokin:

[xjj33p3r]

4.56 reverse cut d44 gears
Inner and outter alloys for a 79 bronco

[heepr]

Waggy D44, driver drop (80s model), just inners and outers and joints. zip 30327 or 29325, whichever is cheaper please.

[jerimy75]

Can I get a quote on 5.29s front and rear for toyota 8" with set up kits to 93726? Thanks.

Jerimy

[GOOBAWIGGA]

Quote for 79hp ford dana 60 reverse rotation, need 5.13gears a detroit, and master install and inner and outer 4340 cromos 35 spline shipped to 95687, vacaville ca

DIDNT GET PM

[Trailduster79]

Can I get a price on 3 Yukon 35 spline Dana 60 axle shafts? My current shafts are 34.25 inches, so I need something in that length.

They would be shipped to 24141 Thanks, Michael

[skullver]

can I get a quote for 5.13 ring and pinion package for a dana 44 out of a jeep wagoneer non vacuum disconnect, driver drop, also a complete set of shafts. Zip is 93001, business addy. thank

[machinewave]

PMs Sent

[rpraterxj]

Dana 30 front, Dana 44 rear, 4.88 (Yukon)r&p + master install kits, also Detroit locker for both shipped to 92630
thanks,
Robert

[farmerbob]

2 sets of 4.88's and overhaulkits for toyota 8" shipped to 60152

[machinewave]

pm`ed

[Devil Dog]

just a master install kit for d60 4.56 carrier.. and one for a 14b 4.10 carrier.. shipped to 28574..
thanks

[Daddy4zack]

Dana 44... 4.56's , Detroit, Install kit (30 spline)

Ford 9".... 4.56's , Install kit (31 spline)

1974 Bronco

Shipped to 95829

Thanks Aaron

[xjone]

looking for the following

2 sets 5.13 gears with install kits

cromo's for a 84 waggy front d44 with superjoints. how much?

[Jagger]

4.88's and install kits for a '92 XJ with a Dana 30 and Dana 44

Shipped to 94588

Thanks

[EarlKann]

Toy 8"

1- 4cyl 5.29
1- V6 5.29
Master install for both.

Shipped to 92382

Thanks,
Donald

[upj wheeler]

How much would a set of 4.56 gears, Auburn ECTED, and install kit for an AMC 20 run me? Dana 44 THICK standard rotation 4.56 and install kit? Chromo shafts for a wagoneer front 44? All shipped to 15126

[resqme]

Scout 44 rear:
Rubicon thick 4.88's (so I can re-use the 3.07 carrier with the 4.88's)
Rubicon ring gear bolts
master install kit
ls clutch kit

Jeep CJ dana 30 front:
4.88 ring and pinon
carrier
master install kit

shipped to 95726...thanks for the quote

[machinewave]

PMs Sent

[Brink_]

Looking for gears for my Jeep. Front is 86 F-350 Dana 60HiPinion with a 4.10 carrier. Rear is a Ford Dana 60 with a 4.10 carrier. Looking for 5.38 gears for each. Both need thick gears I assume. Do you have them? Also need shipping to T4R2M1 Canada. Postal if possible.

Thanks

[78Buford]

Price for complete set of Yukon inners, Yukon outers, and Yukon Superjoints for a 1978 Ford D60 front axle....shipped to 43771 in Ohio. Also, what is the soonest I could get them?

Thanks,
Roy
__________________

[spillman]

Price for inners and outers with joints for an 82 waggy front 44 shipped to 27028.

[RockcontrolXJ]

Price for Ford 8.8 5.13 gearset and master rebuild kit, plus master rebuild kit for HP 44

[Tonka Toy Killer]

Quote for front inner/outter and rear axles for 05 rubicon. Please included Yukon's u-joints. To T2J 3E5 Alberta Canada
Thanks
Jamie

[85cherokeechief]

Can I get a price on a set of 4.56 gears and master rebuild kits for a HP dana 44 and a Dana 60.

[wanderer2004]

I am looking for rebuilld kits for Dana 60.

Chevy 85/86 (date code is 10 22 5 6 A) front:
Spindle bearing and seal kit
King pin kit
Pinion Seal
U joints your best suggestion for a multipurpose rig...

Ford rear
Hub bearings and seals
pinion seal

Other:
1350 ujoints
1350 yokes
Dana 60 case spreader
Gear insallation kits
Ubolts and plates front

Optional...I want, but probably can't afford right now
Detroit locker 4:10 down rear
Eaton E-Locker 4:10 down front

If I am missing something, please let me know. Email me directly at gentrysgarage@yahoo.com
Thanks
Gentry's Garage

[wanderer2004]

I am bidding out to purchase all of the list above optional. The optional I might or might not have enough to purchase now...but will soon.

Thanks

Gentry's Garage

[53CJ3aFlattie]

Can I get a price on a set of 4.56 r&p and master over all kit for a HpD60 shipped to 95207. Thanks Will

[JaketheStomper]

price for chromo shafts 35 spline inner and outer for dana 60 5.13's for the 60 and a 14 bolt with master kits. also an arb for both axles and a compresor. when you send reply can you itemize each one so i know the individual prices thanks

[72blazer]

pm sent

[k5chevyblazer]

5.38s and install kit for a Sterling 10.25

[machinewave]

PMs Sent

[KNZRHOG]

4.88 & master install kit for a Sterling 10.5. It's for an 02 F250.

[MocKKnight]

Can i get a quote on two sets of toy 8" 5.29 4cyl and install kits to 98004 buisness Addy?

Sean

[86CJ7Laredo]

Quote for 73 Chevy Dana 44 Yukon stubs and short side shaft. Shipped to 26105

[Devil Dog]

chevy d60 35 spline outer stubs.. two shipped to 28574

[WideJ]

4.88's HP D60, Install Kit
35 Spline Spool
35 Spline outers
Shipped 91104

Please give price break-down

Thanks.

[machinewave]

PMs Sent

[Ben Holloway]

can you hook me up with some prices on a set of inners for a chev dana 60 and a bearing kit for the ring and pinion?

Ben

[burntlife]

yj dana 30 and 35 yukon 4:10's and master install kits and a 3:73 and up carrier for the 30.
thanks

[machinewave]

pm`ed

[JeepPhisherman]

Looking for a price on the following shipped to 77840:

4.56 gears for 44
Aussie locker for 44
Master install for 44

4.56 gears for Tacoma 8" rear with factory e-locker
Master install for same


Thanks!

[Navajo1]

Price on a set of chevy 60 chromo inners and a set of 35 spline ford 60 stubs shipped to 80229?
Thanks.

[tsmall07]

i need a quote for 5.13's for a hp 44 out of a 79 f150 and a ford 9" rear

also need one for a set of chromo's and joints for the 44

[97bluetj]

Need a price on 5.86 gears for front and rear dana 60 along with install kits.

Thanks

[patman1]

86 Wagoneer inner axles shipped to 92037

thanks

[sik4wheeler]

I need chromoly inners and outers with spicer joints for a D30 on a xj. Also in need of an ARB and 4.88's with the master install kit for a Ford 8.8. Shipped to 95008. Thanks.

[machinewave]

PMs Sent

[Cactusjack]

Price on a 4.10 set for a 9.25 GM IFS and full install kit, shipped to 85236. Thanks.

[machinewave]

pm`ed

[Mike95YJ]

Inners and outers for a Waggy d44 front, Super Joints, 4.88's, and instal kit...shipped to 06468. What can ya do?

[machinewave]

pm`ed

[LCAC_Man]

Pair of Yukon Ford HP Dana 60 35spline outters shipped to 92054?

[PhatCraft]

Could I get a quote for a waggy 4.88 dana 44 and master install kit shipped to 98226


Thanks
Alex

[machinewave]

pm`ed

[ROBBY]

Thick 5.13's for 14 bolt, price and do you have them in stock? I need a set right now...

[ROBBY]

Thick 5.13's for 14 bolt, price and do you have them in stock? I need a set right now...:D

[machinewave]

pm`ed

[ogvb3]

Cheapest price I could find, great customer service, and fast shipping.

Thanks Scott!

[MDEnce]

Price on a set of 4.88 gears and install kit for a 95 YJ D30 (RC) shipped to 89423 please ;)

[machinewave]

PMs Sent

[Prohibited]

Can I get a quote on

1. 5.13's - 78' Ford hp d60 with 4.10 carrier...believe I need thick gears

2. Master install for ^^ and for a 14bff

3. 4340 35 spline inners and outers for 78' Ford d60

4. (2) 5-806X Spicer cold forged Ujoints

shipped to a business addy 51301

Thanks,

[Stonyford]

Quote please, for a set of dana 44, 4340 chromoly axles long inner 27 15/16 x 30 spline, short inner 18 1/2 x 30 spline, g.m. outers 9 15/16 x 19 spline, and a set of CTM's for the above axles. shipped to 95123...
Thanks

[OlyWaXJ]

Could I get a price on D44 std. 2x 5:13's and a master install shipped to 98512.

Thanks

[hogs1022]

Yukon Chromo Outters and Inners for 74 Dana 44 front out of a full size chevy shipped to 72903

[CaseyP]

5.13s and alloys for a 80 waggy 44 and a 8.8, and a arb for a 44 as well

[Cozymonkey13]

yukon dana 44 5.13s reverse cut for a 78 ford front with master install kit shipped to 80020 please and thank you

[Exxon Valdez Jeep]

4.56's and a master install kit for a 31 spline ford 8.8 shipped to 76504. Thanks

[machinewave]

pm`ed

[FbOmRxD]

how about 5.13 gears for LP 44 with an install kit. And 5.13's with install kit for an 8.8 shipped to 01775. Thanks.

[machinewave]

pm`ed

[sammeeks351]

Thick 5.13's for 14 bolt shipped to 88220?

[BMFNTOY]

Shoot me a price on a master install kit for a D60

Thanks
Jeff

[CRFMXR]

Toyota V6 and 7.5" 5.29s with master kits to 98373, thanks.

[Twig]

Quote for 4.88s Dana 30/Ford 8.8 and master install kits. 54476
Thanks!

[Foneguy]

How about Just some shafts for a 78 Scout REAR D44 shipped to 98290

[p575]

price on chromo shafts and good u-joints for a 79 f250 d44. price for short side and both sides please.

[machinewave]

pm`ed

[burbanbeast]

4.56s and install kits for a 89' suburban (30 spline) 10b front and rear

[burbanbeast]

4.56s and install kits for a 89' suburban (30 spline) 10b front and rear

[Berd]

Can I get a quote on:

One scout D44 long side chromo axle
One Chevy D44 short side chromo axle
Two Chevy D44 chromo outers
Two scout D44 chromo rear axles

Thanks

[CoveJeepsPA]

Can I gat a price on a Set of Yukon shafts for a front Waggy 44. Driver side drop. shipped to 16635. Thanks!

[machinewave]

pm`ed

[joesexploder]

I am looking for a set of 35 spline 4340 chromoly inner shafts for a ford hp 60 the long side is 33" and short side is 20" shipped to 98070.

[AxlesUp]

chevy d-60 5.8? gears with kit for front and axleshafts with joints.
ford d60 95 rear same.
price on some lockers would be nice as well. detroit arb.
do you have any toy 60 yokes?

[machinewave]

pm`ed

[Panthers65]

Toy 4cyl 5.29
Dana 60 5.38
masters and locker below for both
ARB
detroit
Lockrite
shipped to 30549
itemized out please!

[machinewave]

pm`ed

[creeperjeep]

looking for some 4.88s for a LP44 along with a master install kit
shipped 02563
thanks

[Gozuki]

Got my HP60 35sp shafts, look badass. I saw that there is a hp yukon 5.38 that is 35spline pinion, price with master install? Also standard 5.38 hp please...

[Gozuki]

:confused:

[WideJ]

Quote on Ford HP D60 35 spline yukon inners.
91104

Thx.

[machinewave]

pm`ed

[MT4Runner]

2 Toy 5.29 FJ 9.25" R&P's and master kits to 59901?

Thanks

[Kcolg]

looking for Yukon 4.10 and 4.56 gears for D30 long low pinion and D35 c-clip.

Also pricing on any/all Super 35 kits you have and Auburn Ected locker.

Shipped to 64870 business address.
Thanks.

[crushu]

Hi, 4340 axles inners & outers, superjoints, master install kit and seals for the axles if they don't come in the kit.
Also spindle nuts and washers
for 79 F150 front D44hp and rear Chev 14bff 10.5
Shipped by Boat to Australia zip 3175
Thanks

[machinewave]

pm`ed

[ROCKWRANGLR]

price on 5.13's for a 44 and a 60 for a 78 F250 Highboy,to 91745

[badge1236]

What would the cost be for a set of scout II axle shafts for a '75?

[machinewave]

pm`ed

[78Buford]

Just ordered a D60 Master Kit & Drive flange cap (I lost one of mine). Good prices.

Thanks,
Roy

[machinewave]

pm`ed - thanks

[supernatural]

-chromo shafts for a LP dana30

-4.56 gears for LP D30, ford 8.8

-master install kits for both

-quote for lockers on both ends

-any other upgrade i can buy for LP dana30

shipped to 80401


THANKS!!!!

[mtu_jeeper]

Can I get 2 separate quotes, one for R&P with master installs (5.13 gears) for a hpD44 and 9" Rear. I also need a quote for yukon shafts and joints for the D44. Shipped to 49931 Thanks! Christian

[machinewave]

pm`ed

[vuke]

4.56's for a ford 9" with install kit and 4.56's and install kit for a dana 44 in a 66 early bronco.

[gofast]

to 87401

[jeeperak]

ford 9..detroit 31 spline and 513s
dana 44 rev hp 30 spline
ected detroit and 513s
and master instals
85635..they are both from 77-79 f150

[freeqgOd]

Can I get a price on 5.13's for a HP Dana 44 rc and Dana 60 with master install kits shipped to 40207

[AttemptingTJ]

(8.8 31 spline) 4.56 gears and master install kit and a full spool instead of a new carrier.

(d30 high pinion) 4.56 gears and master install kit, I already have the carrier so its not needed.

shipped to a business at 10507

Thanks, Ben

[RampageFSJ]

Could I get prices for:

1 Master install kit for a front dodge dana 60 (really a 61, but I was told that they have the same install kits) and if it's no trouble, could you tell me what that includes?

1 mini install kit for a full floating 14 bolt, could you tell me what that includes too?

Many thanks.

[avery4jc]

Could you shoot me over a price quote for a R&P and master install kits for a front and rear 10b. 4.88's and 5.13's (both quotes only necessary if price is different.) Thanks

-Avery

[machinewave]

pm`ed

[sucmah]

Price on 35 spline outers and custom length inners for ford D60.

[ttocsnekia]

4.56 gears for d30 (non disco, hp, reverse cut) and Chrysler 8.25 (27 spline) with master installs shipped to 49684

[avery4jc]

I didn't get a PM, could you get me a quote from post #141 please.

-Avery

[machinewave]

pm`ed

[Cochese]

Please give me a price on:

D70U 5.13 R&P (which brands available and is this standard or thick gear?)
D70U Detroit for 5.13 gear
Install kit for D70U

[katoom]

Price on 5.13s, chromo shafts and joints for a 80 scout.thanks

[keho]

We are now putting together Axle Builder Packages ... give us a call or PM for the ABSOLUTE lowest price on YUKON ring&pinions, master overhaul kits and Chromoly Axle Shafts.

Many domestic and foreign applications to choose from ... Keep in mind _machinewave will meet or beat anyone's price ...

Most products in stock, ready to ship ... at your door within 3 days (Generally)

_machinewave 812.623.3473

How much for a pair of 4.88s and install kits for a '78 Toyota Landcruiser FJ40?

[canaminal]

price? avail? for scout ,axles 35 spline 28.5" to flange set 20 brgs and weldon set 20 ends, or 1" shorter

D60 powerlock side gears 35 spline

[blasphemous]

14boltFF - 5.13 gears, EZ locker or Powertrax and master install kit to 40214 (price of 4.88 gears also)

[ricesyj]

1977 F150 Dana 44 HP front

Can you send me a price on the Chromoly Yukon Shafts and the Yukon Super U-Joint.

Thanks, Troy

[Tchong1967]

Need a quote for 4.56 ring and pinion and master installation kit front and rear for Tacoma 1996 Xcab 4x4 non TRD 10 bolt

And a quote for ARB locker RD89 for the same car.

[azgrumpy]

I need both long and short side with u-joints for a 82 D44 Jeep wagoneer front axle.
shipped to 85014

[machinewave]

pm`ed

[sasrangersoon]

waggy front d44 4.88s an ford 8.8 rear 4.88s please. zip 32211.

[DAMAGED I]

Price for 4.56 R&P/install kit shipped to 92057?For a 8.8 Thanks

[xj4life]

quote for ford 9" 5.13/4 R&P/Install kit, and 35 SPLINE Bronco/F150 LARGE BEARING FORGED AXLE KIT.....INCLUDES STUDS,SEALS , BEARINGS AND RETAINER PLATES ,32" LONG AXLES

shipped to 48317

Thanks

[Bobbo3234]

quote for HP60/60 (f/r) 5.38 gears, with master install kits to 98033

[LA97TJ]

How much for 4.56 D30 and D35 gears with a master install kit shipped to 70806?
thanks

[patrickjeep]

dana 30 tj and ford 8.8 ring ang pinion 4.56

you will ship in canada? g5a 2t8 zip code

[BigScout]

PM sent. Looking for 5.13 gears for a 60 front and 70 rear and a price on some 35 spline rear shafts.

[machinewave]

pm`ed

[mtnbkrmatt]

jeep rubicon 44 4.56s front and rear, master install kits, and cromo shafts for the front, itemized, please(not sure if i need(can afford) the shafts):D

[cougarfreak]

I'm looking to get a set of rear D60 35 splined full float axles at a custom width... I need a wms-wms of 60.75" so I will be shortening the housing tubes. The axle I'm using is out of a '75 Ford F-250 HighBoy measuring 63.5" wms-wms. I will be shortening the axles by the same amount as the housing tubes (-2.25", 1.125"/side)? How much for a set to 94534? What grade chromo 1541-4340? also I don't have the stock axles to measure... What is the stock length of these axles?

Also want a quote breakdown on a 4.56 ring and pinion for above axle,
Detroit locker 35 spline
Master install kit
inner and Outter bearing kit (Timken preferred)
Please

[cougarfreak]

how about for a set of front inner and outter Yukons for an '81 grand waggy D44? 4340 or 1541? Would you please tell me the stock length of the above rear D60 axle shafts outta the highboy?

[four27_cobra]

Quote on 3.54 gears with 26 spline pinion for a D44 standard rotation, master install kit, and any kind of a lunchbox locker if you sell it shipped to 91214 please.

[machinewave]

PMs Sent

[xanthias]

5.86/5.89 R&P with install kits for front Chevy Dana 44 and rear Dodge Dana 60.

I'd also like included a full spool quote for the 60 and something like a TrueTrac for the 44 (I'm open to options on this - need more forgiveness up front than a spool/detroit). Same thing here, please - parts to my door 77345.

Thanks!

[Jeepermat]

Need 5.13 standard rotations for a D60 and a D44, both with install kits shipped to 80134,

[machinewave]

pm`ed

[ohiozj]

can i get a price on :

ford hp dana 44 front 456 gears w/ install kit
ford 9" rear 456 gears w/ install kits

set of shafts for the front d44

shipped to 45226 business

[Nordic1]

price for 5.38s for a low pinion 60 with install kit to 95926

[oldjeep]

4.88's and install kits for Ford 8.8 and HP D30 shipped to 55386

Thanks

[kennyv0826]

how much for 5.29's for a 94 FZJ80?

amfamsec@gmail.com

[rholmes]

4.56's for gm 12 bolt thick and gm 44 front with master installs, shipped to 37048

[SFAZR2DAVE2112]

4.56's for a ford 9" shipped to 27028. Thanks!

[machinewave]

pm`ed

[mossrocktj]

4.88's dana 30 and install kit 02066

[machinewave]

pm`ed

[billyballer]

Dana 30 Standard rotation 4.56 gears
AMC 20 4.56 gears and one piece axle shafts.
-Bill

[oober]

79 8 lug d44 High pinion 4.10's and master install kit shipped to 66762

[Stuckle]

quote on a set of yukon shafts for my chevy d44 front. ill be running ctm joints.

no shipping quote as im in canada and will haver to figure something out

thanks

[phillyzj]

for an hp44

4.88's + install + detroit (if you carry them)

to 08555

[machinewave]

pm`ed

[sucmah]

need quote on d60r 5.13 thick with master install kit to 98632.

[franky996]

'79 Ford Bronco Dana44 , 4130 axle shafts and good joints, zip is 78664
thanks

[dnebout]

79 Ford Bronco rear 9" chromos to 94553.31 spline 32" long
Thanks

[CAROLINACRAWLER]

PM'D ya

[dnebout]

no pm

[machinewave]

pm`ed

[plug ugly]

price on ford 10.25 ff axles shafts please to 95835

[beartj]

THick 5.13s for an hp60 and a 14bff. Price with and without master installs. Shipped to 47906 (Purdue/W. Lafayette) and 46902 (both indiana zips).

[machinewave]

pm`ed

[Blueknightcrew]

looking for a axle package price on 78 Ford D60 front. inner, outers,joints and lockouts or drive flanges if possible. shipped to 53555. Thanks for your time.

Ron

[crushu]

300m joints D44
4340 axles D44hp 79 F150
shipping to 15679
Thanks

[machinewave]

PMs Sent

[tw1st3d5]

price on 5.13s for a D44 and 9", master install kits for both. ARB for D44 and 31 spline Detroit for the 9". All shipped to 98366.
Thanks

[machinewave]

pm`ed

[mtnbkrmatt]

axle packages f/r for 06 rubi d44s 4.88 gears shipped to 62095

[flexin81]

price on 586 gears for a GM dana 60 (front) and instal kit. And 14 bolt same gears and install kit
shipped to 67108 please
Thanks

[WLD_OTZ]

Need price on R&P for standard rotation D44, 4.56 gears with overhaul kit.

Thanks!
John

[machinewave]

pm`ed

[cj7mb]

Please send me a price for a Yukon master install kit with timkin bearings for a 1986 Chevy dana 60 and a 1986 14 bolt 10.5" rear end shipped to 04401. Thanks, Mike

[machinewave]

pm`ed

[Blinkinlights]

I'm looking for front Chrome Moly inner and outer axle shafts for a D44HD wide track. Please break out price for better joints and shipping as I'm up in Canada and won't ship UPS. Please supply shipping weight info as well.

Additionally, please quote me install kits on D44HD and FFD60 rear. These diffs are from a mid 70's J20 and are running 3>73 gears. I will rip them apart and confirm all measurements with you prior to final order.

Greg

[barneybasher1010]

need 456 gears and master kit for a 10 bolt and 12 bolt chevy shipped to 93257

[NOTPRETTY]

79 Ford 35 spline D60 outter stubs...11 3/8's
79 Ford 35 spline D60 inners both sides

or...a complete kit for the above...

79 Ford HPD60 and Rear D60 4.88 gears...no install kits...

Above diffs...need detroits too.

Looking for a shockingly low price...:eek:

PM or email to go2camp@comcast.net

[machinewave]

pm`ed

[konacaliboy]

Price on 5.29's V-6 rear and 4 cyl front and install kits. Also a detroit locker for the V-6 rear. ZIP 95632

[machinewave]

pm`ed

[Hendo]

i need a price on yucon d60 35 spline outers only for a dodge d60

[OX]

Price on yukon 4340, 77 bronco 31 spline 9" shafts.

Thanks

[ZJim]

Shot me a price on some Waggy 44 chromoly shafts and ujoints..

[KidWithAcrayon]

Dana 30 Install Kit
Dana 30 4.27 ring and pinion gears
Dana 30 Set up bearings
Chrysler 8.25 Install Kit
Chrysler 8.25 4.27 ring and pinion gears
Chrysler 8.25 Set up bearings


Quote, shipped to 75022

[machinewave]

pm`ed

[mtu_jeeper]

Prices for 4.88 gears, carrier, master install kit for hp dana 44 front axle. 4.88 gears and master install kit for ford 9in.. Shipped to 49931. Thanks.

[machinewave]

pm`ed

[Nordic1]

hey could I get a price on dana 60 low pinion 5.13 or 5.38 to 95926 thanks!

[SickRock]

Need to get price on Rubicon D44 5.13 and master install

Need to get pice on D60 rear 5.13 and master install

Thanks!

[machinewave]

pm`ed

[BMFNTOY]

Price on chevy D60 inner and outter 35 spline shafts shipped to 95662

thanks
Jeff

[Hendo]

install kit for a d60 and a arb if you sell em also spindles for 35 spline

[Natedog57]

I'd like prices/shipped to 32130 for:

d44 standard/thick 5.13 front AND rear
ford 8.8 4.56
3 d44 master instal kits
1 8.8 instal kit
2 d44 lockrights
- thanks

[machinewave]

pm`ed

[A_Fire_InsideR1]

Hi i've got a '98 F150 lifted on 35"s, i'm getting my differential regeared to 4.56 (and an eaton posi put in), could you please give me a quote on a set of yukon 4.56 gears, all the bearings and pieces needed for the install and if you guys carry them, a notched cross pin? the differential is a ford 8.8, 31 spline thanks - Scott

[bluewheelinYJ]

I have a set of 60's out of a 79 Ford F-250, HP front, FF rear. Im looking for some price quotes on a quite a few items. If possible could i get the individual prices also. Thanks.

1. Front 35 spline outers
2. Front 5.38 REVERSE CUT, Thick Gear Set
3. Front master install kit
4. Front Detroit
5. Rear 5.38 Gears
6. Rear spool for 4.56 and up gears
7. Rear 35 spline shafts
8. Rear master install kit

[blackwidow63]

Could I please get a price on 4.88's gears and install kits and also shafts for 1980 Scout d44front and d44rear,also shipped to 48060.Thanks

[machinewave]

pm`ed

[jims cj5]

Please give me a price for 4:10 gear sets and install kits for an AMC20 and jeep cj D30, along with a one piece axle set for the AMC20 (wide track) thanks

jharris@primeelectrical.net

edit: shipped to 92078

[Captain Crunch]

D60 HP 5:13.s to 80121 Thanks.

[Moobys]

I need a price for a Dana 30 4.56 Ring/Pinion and Install Kit for a 2000 TJ, shipped to 64064. Thanks!

[machinewave]

pm`ed

[rusty davis]

Need a price on a R&P for a Toy V6 and a master install kit for the same shipped to 28731
While I'm at it could you quote me a Lock Right and a Detroit?

Thanks!

[muddy_yota_guy]

how much for 5.29s front and rear for toy 4 cyl 8 inch and master install kits shipped to 42544?

[machinewave]

pm`ed

[tweba99]

Price for 5.13 reverse cut gears and install kit for a 79' HP60 shippped to 39047.

[machinewave]

pm`ed

[NOTPRETTY]

Price for Yukon axle shafts full set...no joints...for 1979 Ford HP60 shipped to 95630

[machinewave]

pm`ed

[wanderer-RRORC]

44 front LP (75 ford F250 HD) 5:13
Sterling 10.25 5:13

to 43760 (individually and package..thanks):D

[zapzuki2]

rear 31 spline axles and 4.56 gear sets front and rear for a 1976 ford bronco shipped to 74361

[SWAG MFG]

I would like to get a price on
(2) 35 spline Ford Dana 60 rear 33.5"
(2) 35 spline 79 Ford Dana 60 front outer stubs
(1) 35 spline Ford Dana 60 front long 32.56" custom length
(1) 35 spline 85 Ford Dana 60 front short 15.97
(2) Dana 60 spicer U-Joints with full circle clips

Shipped to 97045

Thanks

[LostIt]

price check on 5.89 R&Ps, master kits, and carriers for a standard rotation front D60 (dodge) and rear D70B (ford) shipped to 77840

[machinewave]

pm`ed

[teapot]

price on fj40 install kit and 4.88 r/p shipped to 94044

[machinewave]

pm`ed

[Hot Rod]

Wanted to check price on a set of 4.88s...

Dana 44 HP with basic install kit
14 bolt ff thick with basic install kit (4:10 & down)

Also seperate price for 14 bolt detroit locker.

What is shipping to 45247? I may drive out and check out the shop since I am located in Cincy and looking for a new shop. Thanks!

Tyler

[machinewave]

pm`ed

[ToysRfun]

Can you please give me a quote for 4.56 gears and install kit for '78 front chevy dana 44 shipped to 85381. Thanks

[machinewave]

pm`ed