Grndhog
04-04-2002, 08:26 PM
I searched but realy didn`t come up with what I was looking for. Since I can`t find a Ford RC44 anywhere aroud here I`m looking at getting a 90 Grand Waggy nondisconect frt 44. I refuse to spend any more money on my D30. This axle is going into a MJ. Do these axles have locking hubs or not ? ( I haven`t seen it yet, 2.5hrs away.)If not, what parts are needed to convert it. Will flat top Knuckles fit? Do the rear 44`s from these GW`s have disc or drum brakes ? I already have a XJ 44 in the rear but may get the GW rear and transfer my gears and spool over to get matching lug pattern. Any thoughts or suggestions?
mudpup
04-04-2002, 08:57 PM
They do not come with lockouts, however it is a straigh bolt-on to add them. Flat top knuckles should fit (they fit on my '87 front from a waggy). The rear will have drums, might be easier to switch brakes(if they are different) and shafts instead of the gears and spool.
Jeepmangled87
04-04-2002, 09:43 PM
go to auto zone or any auto parts store and get some 19 spline Warn PREMIUM hubs, and your set. As for the back they all came with drums. :smokin:
Jeepdude_Jay
04-05-2002, 06:02 AM
I believe the waggy will have a 20 in the back, not a 44.
90WAG
04-05-2002, 06:31 AM
My '90 Grand Wagoneer has 44's front and back.
mudpup
04-05-2002, 06:32 AM
Originally posted by Jeepdude_Jay
I believe the waggy will have a 20 in the back, not a 44.
I believe around '86 the waggy switched from a 20 to a 44 in the rear.
Jakesteramalamajama
04-05-2002, 06:42 AM
Originally posted by mudpup
I believe around '86 the waggy switched from a 20 to a 44 in the rear.
Yes, this is correct. My waggy 44s came out of an '87.
Grndhog
04-05-2002, 12:45 PM
Thanks for the info. I think I`m going to continue my search for the ford RC44 for a while longer considering I already have the gears, locker and hubs for the Ford.
CJ-Jeeper
04-05-2002, 05:58 PM
Those parts can be used on any 44
ColoYJ
04-05-2002, 06:06 PM
originally posted by CJ-Jeeper:
Those parts can be used on any 44
That is true for the locker and hubs but no the RC gears .
CJ-Jeeper
04-05-2002, 06:18 PM
Thanks, I forgot about that.
kyrel69
04-05-2002, 07:04 PM
early 80's waggy came with 44 up front and 20 in the rear(but they were one-peice) late 80's and 90's had 44 front and rear. My friend ran his stock waggy axle for about 2 years with 38.5 and never broke a rear and he had the amc 20 rear. Just some food for thought. No one wants them but I think they are stronger than a stock 44. Amc 20 out of a waggy has bigger axle, and bigger ring gear.