Milled Yugo AK duracoat colour?

[usmcdoc14]

weeee :D

[usmcdoc14]

Finished the milled Yugoslavian AK with custom oak swell palm grips and now its time for duracoating :D what sucks is there was too many small pits and my TIG job is not the best in the world so blueing is out.
I filled all of the pits with JB weld and metal filler but I need a color.
First off it will be glossy :flipoff2: I own no shiny AK's but we will figure it all out.

http://www.pirate4x4.com/forum/gallery/files/1/3/3/4/4/DSC_0131.JPG

I have a OMFG respect for the fuckers that milled these bitches out in the first place :eek: if any of you wonder why a milled receiver is $500 bucks I know why :laughing: OK with CNC you only have to do it once but just with milling new side plates WITH rails as one piece I don't think I would want to do one from just a hunk of steel.

http://www.pirate4x4.com/forum/gallery/files/1/3/3/4/4/DSC_0130.JPG


These were fun to make. Laminated 1" thick oak planks carved out. You have to really look to find the seams to show they are not one peice. and sorry they do not line up in the pic as the rear metal retainer is off, but they are perfect when its on
http://www.pirate4x4.com/forum/gallery/files/1/3/3/4/4/DSC_0129.JPG

I am also making a violin case for it when its done :evil:
http://www.pirate4x4.com/forum/gallery/files/1/3/3/4/4/DSC_0128.JPG

I also have to figure the stamping I want (if any) and how to do it as well.
http://www.pirate4x4.com/forum/gallery/files/1/3/3/4/4/DSC_0132_327777.JPG


wait for poll and color choices

[usmcdoc14]

Colors are:
Gloss black
http://www.lauerweaponry.com/images/dcr_41.jpg

Gun Blue
http://www.lauerweaponry.com/images/dcr_63.jpg

Blue Titanium
http://www.lauerweaponry.com/images/dcr_107.jpg

FN Green
http://www.lauerweaponry.com/images/dcr_87.jpg

or write in from http://www.lauerweaponry.com/duracoatcolors.cfm?colortype=stock&Category=220

[BarfBag]

I think gloss black would look real nice against that wood

[Bubba Ray Boudreaux]

http://www.lauerweaponry.com/images/dcr_110.jpg

[usmcdoc14]

http://www.lauerweaponry.com/images/dcr_110.jpg

ok a write in for "Cop Butt-plug Purple" :D

[packnrat]

go with a winter tiger stripe.:smokin::mr-t:


.

[Hef]

Yellow and Black stripes.

[LiLBucket]

I have a feeling you already know what color you want it. You just want to pimp the pics of your dumb gun:shaking:









That thing is nice:flipoff2: I vote for blue titanium!

[usmcdoc14]

I have a feeling you already know what color you want it. You just want to pimp the pics of your dumb gun:shaking:
That thing is nice:flipoff2: I vote for blue titanium!

actualy, no :laughing: I am seriously going to go with what is voted. :flipoff2:
I was thinking "blued" color, then black..then "old parkerized greenish" so I have no fucking idea.
I should have taken pick of the side plates when I made them, anyone who has tried to build one of these knows how fun the left side is to make "right".

Its going to get a few coats of durafill, then color and maybe a clearcoat.

[aloharover]

Needs to be something from the Bloomberg Collection.

I like the Red

[Frankenyota]

I'd go with gloss black.

[TheRedHorseman]

http://graysmatter.codivation.com/content/binary/zoolander_face.jpg

[rockmup]

Needs to be something from the Bloomberg Collection.




I'll second this. It has to come from there !!!

[bronko]

Neither:flipoff2:

I did my Brother-in-laws 870 in HK Blue/Gray...Very very nice color. It would be perfect with your wood :laughing:

http://www.lauerweaponry.com/images/dcr_80.jpg

[usmcdoc14]

http://graysmatter.codivation.com/content/binary/zoolander_face.jpg
write in for "Le Tigra"
I'll second this. It has to come from there !!!

no funky colors on the AK :flipoff2: and no camo. plain simple "AK" color

[Weasel]

German Red, make it really evil.

[indulf]

Yellow and Black stripes.

hell yeah :smokin:

TO HELL WITH THE DEVIL!!

http://www.rockeyez.com/interviews/stryper/STRYPER88.jpg

[Vermin]

I like the idea of any of the blue tints - should contrast well with the furniture and give it a well.. 'blued' look. Might be neet :)

[misterfubar]

I have some extra "Goddess" purple I'll be happy to send you.

Of your choices I think the blue titanium would look great with that wood.

[DavidVanVorous]

Stock works looks real nice, voted black but make sure everythings prefect on the metal-bondo work as itll show big time iffen ye dont... ;)

As to the forend what did you settle on for the finish, I see a toned down oak or is it just the pic?

D.

[usmcdoc14]

Stock works looks real nice, voted black but make sure everythings prefect on the metal-bondo work as itll show big time iffen ye dont... ;)

As to the forend what did you settle on for the finish, I see a toned down oak or is it just the pic?

D.

its near perfect :laughing: I hate body work because I am anal about it :emb: I am thinking of fitting the dustcover to the gun as there are some slight curves in it to even the gap :laughing:

oak with "somethin spar" urathene, no stain

[DavidVanVorous]

its near perfect :laughing: I hate body work because I am anal about it :emb: I am thinking of fitting the dustcover to the gun as there are some slight curves in it to even the gap :laughing:

oak with "somethin spar" urathene, no stain

The "cover up" work will look right nice regardless of color then.

Must say that fer a non BP shooter type hardware its looking good.

D.

[usmcdoc14]

The "cover up" work will look right nice regardless of color then.

Must say that fer a non BP shooter type hardware its looking good.

D.

I can feel a couple thou difference where my fill is due to me wanting to leave a "tooth" for the coating, the durafill should solve that.

I keep going "Its milled, milled = perfect/flat/strait/square...but its a fucking AK = shoot while horseshoe shaped" :laughing:

The handguard was a fun project but with a few mistakes, I know where they are and I will not point them out :flipoff2:
btw: I fucking hate woodworking

[Napoleon047]

I did a 1911 in gun blue duracoat, it turned out pretty good.

[TheRedHorseman]

write in for "Le Tigra"


Le Tigra, Blue Steel, whatever.

[usmcdoc14]

Le Tigra, Blue Steel, whatever.

Don't "whatever" me :shaking: "whatever" is crazy! I feel like I'm taking crazy pills! I invented the piano key necktie, I invented it! What have you done, TRH? You've done nothing! NOTHIIIING!

:D

[TheRedHorseman]

Damn it, now I have to go rent that trainwreck of a quotable movie.

[nooblet]

I voted other... After seeing your mad stencil skills I think you need to break out the air brush again...

Chris

[usmcdoc14]

I voted other... After seeing your mad stencil skills I think you need to break out the air brush again...

Chris

I have 2 AR's that are getting that love in a few weeks. This is my "nice" ak just like the DOC-15 is my "nice" AR. :p

[PONY_DRIVER]

Something bluish or alternately you don't have a hair on your ass if you don't do a Tony the Tiger theme.:flipoff2:

[misfitcj]

blue and you need to buy a bike......soon mine will run :flipoff2:

[Dookey]

POLISH IT!


hell... then it would probably never get done. :flipoff2:

[TheRedHorseman]

Awww schnapp dawg
http://www.utilitysafeguard.com/K01404-Metallic-Paint-Chrome-Aluminum

[Aces'n'8s]

I say Blue Titanium as long as it doesn't turn out like DC's "German Blue" whatever. Man that was a nasty blue color....

[far...right]

.

[&ReW]

actualy, no :laughing: I am seriously going to go with what is voted. :flipoff2:

I call bs.

[Sturgell]

.

Is that a Romy-milled receiver-gold-piece of gun fuckery? Or does the barrel and gas system bear an uncanny resemblance to Romy parts?

[animator]

Is that a Romy-milled receiver-gold-piece of gun fuckery? Or does the barrel and gas system bear an uncanny resemblance to Romy parts?



It doesn't appear to be milled...

[usmcdoc14]

.

eventualy I will gold plate one :laughing:

I call bs.

Pink wins I ban you for a day :flipoff2:

[animator]

I've done all my AKs and FAL in HK Semi-gloss black. It looks great, as it isn't a dull flat black, and isn't overly glossy either.

I'll do more in the Semi-gloss black, and once I get my VZ-58s done, I'll do those in blue. Actually, I like that blue-gray, so I might do that... :D

[YellowSub1962]

I refuse to vote in this poll. Doc has always wanted a pink rifle. This poll is just his way of getting public acceptence to be metro.


:usa:

[southernfriedcj8]

Just dropped by to do my part. Love me some bacon!

[usmcdoc14]

Fuckers wanna mess with MY poll :D I can do this all day :laughing:

[chuckiekillskittens]

Fuckers wanna mess with MY poll :D I can do this all day :laughing:

pink for the win:flipoff2:

[WertyzMom]

u suk...


:p :p :p

[misterfubar]

Looks like pink is winning. :flipoff2:

[Boheefus]

I refuse to vote in this poll. Doc has always wanted a pink rifle. This poll is just his way of getting public acceptence to be metro.


:usa:

he has one already....