I have a cheap 110 mig [century] which is useless I also have a linclon 185 tig could I remove the tranformer from mig jumper the 185 leads [on stick] to the gun leads and have a decent mig?any one done this?
thanks
Chris

?

I don't know why not... I have a 300cc/cv Miller and thats estentially what it is, a big power box that I can stick, mig or tig with.

i was thinking the same thing. i figured if my 10 year old lincoln weld pack 155 quit working, i could use my new syncrowave 200 to power the wire feeder. the lincoln has been working flawlessly for over 10 years now and i really don't see it going out any time soon tho.

Tig is a constant current process and mig is contant voltage. Your plan will not work. You can use the Tig box for stick but wire feed will not work.

I don't know why not... I have a 300cc/cv Miller and thats estentially what it is, a big power box that I can stick, mig or tig with.

Your box is not really the same. The 185 lincoln sould be cc only not cc/cv.

I've done exactly as you've suggested and it worked fine with an old Lincoln AC/DC stick welder and a Century 110. Your tip will be hot all the time so be careful. Of course you're used to getting flashed with your Century so no problem. I have no idea though if your tig box could be configured to do the same thing.
John