online store for sanding discs/belts?

[300sniper]

any one know of a good place to get 10" sanding discs and 6x48" belts? i searched google once before and found lots of results. i am not sure what i searched for then, now i can't find much.

also, is there a preferred brand? i have always used 3m for my roloc discs and have had good luck. i am thinking about a 60grit for the 10" disc and an 80grit for the belt.

[Kartracer55]

MSC direct will have what you need, and there will be so many options your head will spin. Give them a calla nd they can help you pick out the best one for what you want to do. They have helped me a bunch of times.

Jim

[77fixer]

I was just looking this morning and found MSC (http://www1.mscdirect.com/CGI/NNSRHM) and Enco (http://www.use-enco.com/CGI/INSRHI?PMSECT=203&KNC-DV6174368836). The local welding shop only wants to sell a minimum of 10. I am going to check other local companies tomorrow.
I am planning on using a Norton Zircon 36 grit belt and an 80-120 disc. I've used those belts in an industrial setting and they held up well and removed a lot of metal quickly. I only plan on using the disc for finish type work.
Try searching "6x48 sanding belt". I didn't pay attention to where MSC was but Enco is in Nev.

[jstarnes]

travers.com

[Vortec_Cruiser]

Here's two places where I recently bought discs & belts:
http://cgi.ebay.com/10-SELF-STICK-120-GRIT-SANDING-DISCS-CLOTH_W0QQitemZ6046111533QQcategoryZ20796QQrdZ1QQc mdZViewItem
http://abrasivesales.com/

[D60]

http://abrasivesales.com/

Good luck here myself, would recommend.