Hydrobooste Question

[sgleshot]

I have a 79 f150 that I have installed hydrobooste in, now my question is what should I run for a proportioning valve? I planned on just running lines right off of the master cylinder, but I was looking for some input on how I should do this. Any input is awesome. Thanks

[sgleshot]

bump

[broncobilly_69]

if you aren't having any problem with one end grabbing too much before the other I wouldn't think you would need a proportioning valve

[Scot]

I am running the stock '78 proportioning valve and hydroboost out of a 2K Superduty. Brakes work great.

[sgleshot]

thanks for your input, I think its gunna be a trial and error type of deal.

[bmc69]

I'm running the hydro from a 75 Lincoln on a disc/drum EB (F250 disc and rum thouhg) and no proportional valve. Slight rear bias but I like it that way

[sgleshot]

I have 4 wheel disc in my 79 so I'm hopin that it will even out nicely, I already installed a valve out back just in case when I did the disc conversion, so it I need to I can just adjust it.