Anyone got any part no's for that frame to t-case mount on the passenger's side?

It's from a D1, and the one I really need is the lower one that goes from the bushing to the frame. The upper one is just a simple plate I can make if I have to.

Thanks! :flipoff2:

Is this what you're after? i think it's part # 10 you need? (US passenger side= RH side!)
These parts are the same for autobox or manual 5 speed.

http://img.photobucket.com/albums/v177/diesel_jim/mount1.jpg

http://img.photobucket.com/albums/v177/diesel_jim/mount2.jpg

Hmm, that looks noting like my frame mount. Is that the transmission mount of the transfer case mount pictured there?

Yup, the LH bracket (# 9) bolts to the main gearbox, and t'other one (# 10 bolts to the t/case (vie the "U" shaped brackets)

Yeah, that doesn't look like the DI mount. The one he's talking about mounts to the side of the frame.

300 TDI isn't the same as gass

Mike how big of a hurry are you in?

c'mon Slade ... man up and go down to the dealer. i think it's about $85, that's what I paid for mine at LR bellevue. you also get that fresh factory insall look :flipoff2: i just asked for a D1 passenger side mount.

fwiw

Mike, Mike, Mike:shaking: :shaking: :rolleyes: :rolleyes:

Have you misplaced my phone number already? You saw two of them at least in the shop on wheels. If you can be patient, I can send you one, or you can call my parts guy.

Some guys, you just can't help!:flipoff2:

PT

I was placing an order with our favorite New Orleans Rover Porn Peddler (NORPP), and thought I'd see if he had said bracket.

If I could find a part no. he said he'd try to locate one.

If PT has one laying around, I'll take it.

Revor...no hurry, just getting the parts lined up. :D

OK, i just looked at the 3.9 rangerover classic parts list, and they're totally different to the disco ones i posted, so i'm assuming the US spec disco has different mounts, anyway, here goes..... (sorry for the image size!)

http://img.photobucket.com/albums/v177/diesel_jim/frame3.jpg

http://img.photobucket.com/albums/v177/diesel_jim/frame4.jpg

http://img.photobucket.com/albums/v177/diesel_jim/frame5.jpg

http://img.photobucket.com/albums/v177/diesel_jim/frame6.jpg

You almost got it right that time. The transfer case mount that supports the Borg Warner in the Range Rover is not the same as the one that supports the LT230 in the Disco I.

Try again.

No part #'s, but I do have them laying around (V8 style). Take offs from diesel swaps. Can send one out if you need it.

Matt Browne
Overland Engineering

Matt:
you'll likely have one available before I will.

PT

Part no's courtesy of your favorite NORPP...

ANR 4657 - bracket to frame
STC 424 - rubber mount
ANR 2819 - bracket to t-case

Matt, I'll take you up on your offer for the bracket. Where do I send the check?

Michael, give me a call. Contact info is on my lame ass web page.

Matt

Mike:
I tried to get you your parts today, but some idiot parked not one, not two, but three junk Lincoln Continentals in front of my storage space.

If it happens again, it will be time to pull cable :flipoff2:

I'll try to get your shifter and driveshaft next weekend.

PT