PDA

: someone tell me what gear ratio this is

Brawler
04-08-2002, 10:36 AM
ff 14 bolt
road1will
04-08-2002, 10:40 AM
41/10= 4.10

so you have a 4.10 14 bolt :D
KAcrawler
04-08-2002, 10:42 AM
he speaks the truth
Brawler
04-08-2002, 10:43 AM
Originally posted by 9-Volt
41/10= 4.10

so you have a 4.10 14 bolt :D

I assume i need a different carrier to run 5.13 then huh?
The Rockslut
04-08-2002, 10:59 AM
They sell thick gears for the 14 bolt so you dont have to replace the carrier.
DRM
04-08-2002, 11:00 AM
Originally posted by Brawler


I assume i need a different carrier to run 5.13 then huh?

I *think* you will need a 4.56 or lower carrier, or *maybe* you can get a "thick" gear set in the 5.13's for a 14 bolt and use that carrier - but I am not sure...

Boy, I sure am a lot of help :clown:
Scout Dude
04-08-2002, 11:06 AM
4.56's have their own carrier...anything below uses the 4.10 and down..anything above 4.56's is not factory and uses thick gears.
scouter77
04-08-2002, 11:15 AM
I think only a couple places sell the "thick" 5.13 which is the lowest they make for the 10.5" 14 bolt. If there are steeper let me know but I think 5.13 is the lowest because the pinion gets teeny...
Brawler
04-08-2002, 02:09 PM
Originally posted by The Rockslut
They sell thick gears for the 14 bolt so you dont have to replace the carrier.

Would " They " be Randys R&P? I was thinking of ordering from him. Thanks for the info.
POPE
04-08-2002, 03:23 PM
Is that an open or a gov-loc carrier. The cross-shaft looks a little small for an open. If it's the gov loc then just toss it.

BTW, they do make thick gears for these things. I just gotta pony up the money to get my 5.13's :D
Brawler
04-08-2002, 04:15 PM
you tell me if it's gov locked.
Brawler
04-08-2002, 04:16 PM
one more
chris demartini
04-08-2002, 06:54 PM
That's an open diff. Fire up the welder
Moab Austin
04-08-2002, 08:32 PM
gov locks are fine...just take out hte centrifuge spring so they open above like 10 rpm's
RocnWilly
04-19-2002, 01:01 AM
Brawler,
Precision Gear makes the thick 5.13 gears. No carrier change needed. I will be purchasing a set soon for my 14 bolt. The best price I've found so far is Drivetrain warehouse for $229.95 then DTD for $233.00 and our own local Coast driveline for $235.00.
DTD and Coast driveline have the master install kits for $109.00. Gears 4 less has Detroits for $299.00. If u r running this in your Scout I would weld it. If u will be running more on the street I would go with the Detroit. I have a shop checking on a better price for the gears and locker. If your interested let me know maybe we can get a discount on a group buy. I've talked to u before at Fat City.
RocnWilly
04-19-2002, 01:03 AM
I also have brackets for disc brakes if u r interested.