Parting out a running 78' fj40 for a friends build up.
2f running w/ all the CA. smog :barf: still in the rig as of today. All the trimings you need $1,000.00obo
4speed tranny w/ t-case $250.00obo **Sold**
Front stock axle w/ disc brakes, still on the rig $275.00obo
Rear stock axle $150.00obo
Drive lines f$25.00obo **FrontSold**Trashed**
Heater front full assembly $100.00obo
Hard doors w/ working windows $150.00obo
Stock Roll Cag Hoop **Sold**
Front seats need upholstery re-done w/ mounting brackets $75.00obo
Windshield assembly w/ hinges and wiper motor assembly $125.00obo **Sold**

Like I mentioned, this is for a friend. The L/C is in El Dorado Hills CA. The only thing that will stay on this cruiser is the body and frame. Parts can be transported to Stockton for the April swap if needed. Lots of other parts I'm sure will be coming off of this cruiser. Let me know if you need something not on this list.
Campy

Can I have dibs on the front axle and the doors if the doors are not rusted. I work in El Dorado hills, so I could pick them up later this week. Thanks,

Not a problem Jeff. Give me a chance to check for rust. drop a number on PM and we can hook up anytime over there.

BTW, there is also the running boards there. $75.00obo

These items are also posted on mud. So first come first serve.

What kind of shape is the Windshield assembly in? I might be intersted in it?

No cracks that I know of. I'll double check in the morning light an get back to ya.

Its fine, the wipers wiper motor rearview mirror even the rubber gasket between the windshield and cowling was re-usable.......

Its fine, the wipers wiper motor rearview mirror even the rubber gasket between the windshield and cowling was re-usable.......

Great, now the owner chimes in...:D
Everybody, welcome the newbie:flipoff2: our buddy D-bash:grinpimp: These parts are off his rig. I'm just tryin to help another brother out...

Here are pics of one of the doors and the windshield. both doors are in the same shape....... the glass in the door is not that clean.......... its rolled down:D

Can I have dibs on the front axle
RATS!!! I'm too slow... Hey DW, if you change your mind... :D

I will take the windshield frame and the front seats if they are still available. How about an upper dash pad? Rear jump seats?

Thanks Campy.:)

Windshield frame's been spoken for a couple times over Mark:( Front Seats, you've got first dibs. I'll pull a pict and post for your review. Upper d-pad, I'll check on. Rear jump seats, I'll check on too. You gonna be @ the swap? If not, I'm headed to LA this weekend w/ time to kill on Saturday. Wify's got a wedding shower to attend. That means I've got the day to myself, may have the little one though, donno. I think we're in Pasadena(?), LA area.

dash pads are junk, dry rotted sorry. the rear seats are missing the seat but the frame and back rest are straight. hope this helps

dash pads are junk, dry rotted sorry. the rear seats are missing the seat but the frame and back rest are straight. hope this helps

Cracks in the dashpad are ok as long as it is solid and straight. I have slipcovers.;)

Rear seats are ok w/o lower cushions if the lower seat frame is still there. I've got a couple of partial sets that I can cobble something together from.

Thanks.

I'll confirm today Mark w/ some picts.Otherwise, we can make arrangements over pm.

Do you want to get rid of the grill and bezel? i would love to turn mongel abortion back into a 79:D

Do you want to get rid of the grill and bezel? i would love to turn mongel abortion back into a 79:D
The wiremesh grille yeah. Bezel, don't think that's gonna happin. Sorry, Campy

Am I first in line for the windsheild frame?

Am I first in line for the windsheild frame?
That's what I show. You were up @ 10:26pm 4/2
Orange was next @ 10:36pm 4/2. Rat70fj dropped a note to Dbash a while back that got around to me too late:( . May have to figure something out there...

I could pick it up today or tomorrow.


How much rust does the frame have?

get back to you on it later.

If ya are parting the engine out, I'd like the alternator bracket, to 85648. Thanks!

selling the motor complete at that price:D . If the buyer doesn't want the bracket, then I'll let you know.:cool2:

Is there anything left?

what do you need? There's still the motor, suspension, steering, heater assembly, roll hoop.

pics are here :)

more

even more

Any hardtop on that thing?
and whats with the second windshield frame (earlier model pictured?)

Dog Walker-- front axle, doors(if no rust)
Rat70fj-- windshield
Roch Hugger-- first option on Nightcrawlersfj40's windshield
65swb45-- rear seats, dash pad
Orangefj45-- second option on Nightcrawlerfj40's windshield, front seats, front bumper (if o.k. condition)
Sine80-- windshield hooks off of hood
Kellyo(from MUD)-- rear axle, brakebooster/mc
Brider(from MUD)-- tranny/tcase(possibly)

Everything else is for sale. Complete parting out.

No hard top..The other windshield is off of nightcrawlerfj40's rig. It's a 69er:laughing: . Rock Hugger/ Orangefj45 get 1st dibs. Donno though if either them two are interested in it though. I'll let ya' know.

Front axle is a orginal disk set up right? And the one door looks ok I guess, but there's no pics of the outside of the door/s.

I need a good fuel tank. Mine has old fuel in it. Let me know if you still have it.

Thanks for the heads up Aaron. Prolly interested in the running boards and the rear step as well. ;)

Dog Walker- yes, original. The door, earlier dbash had a pict of the outside. Nothing bad if I recall. We still need to hook up overthere. Drop me a call, besides, it sounds like Mark has some transportation he needs dome by you;)

Scott- he's keeping the fuel tank. However, wash it out, have it boiled by a radiator shop, the POR the thing after you metal ready it. It'll be perfect. PM me if you need a hook up on the POR-15 product.

65swb45- they're yours. Sounds like you'll have to butter up Dog:eek:

65swb45- they're yours. Sounds like you'll have to butter up Dog:eek:

Not to worry Aaron. At the rate Jeff and I are going right now, looks like I'll be delivering his gas pedal and cable to Tin Benders anyways!:p

I'll call you tomorrow, maybe try and stop by on Friday after work. Can't stop by tomorrow. In anycase, I'm still in.

Square bib and bezel?

No I believe it's round. He's keeping it.

More info on the motor. Know the compression? Leaks, mileage, history, etc. Will it go in a 1980 fj40? I know some things changed in other areas, not too sure about motors, though. I've been thinking about restoring the '80 and bastardizing another 40 instead. Thanks,
Jesse

I need a front driveshaft if the joints, etc are good. Give me a price shipped to Birmingham, AL 35226.

More info on the motor. Know the compression? Leaks, mileage, history, etc. Will it go in a 1980 fj40? I know some things changed in other areas, not too sure about motors, though. I've been thinking about restoring the '80 and bastardizing another 40 instead. Thanks,
Jesse

I'll have the compression numbers pulled for you. I'll look into everything else you brought up too. Hopefully someone w/ a little more knowledge:confused: can chime in on the 80's factor. Although, from what I do know the motor internals changed some but the basic size-mounts did not. Hope that helps some.

I need a front driveshaft if the joints, etc are good. Give me a price shipped to Birmingham, AL 35226.

Joints and everything work. They're not brand new by any means, but they work. Shipping is on you, how ya want it. I can ship from business zip of 95742. Mail, UPS (label type), Fed EX(label type), insurance? Let me know, how'd you like it.
Thanks,
Campy:cool2:

I'll have the compression numbers pulled for you. I'll look into everything else you brought up too. Hopefully someone w/ a little more knowledge:confused: can chime in on the 80's factor. Although, from what I do know the motor internals changed some but the basic size-mounts did not. Hope that helps some.

Thanks, I'll keep checking in. I'm going to bed for the day, but I'll check when I wake up. (I work nights). Anyway, my 40 was born in February of 1980. I hope it all works out. I think it was one of those mid-year production changes, kinda like the 1974 fj40's. I can't remember exactly, though. I think there were some suspensions changes somewhere around july or august? Maybe that's when the other changes occurred? I'd like to know if the carbs are interchangable, because I think this one has a newer rebuilt carb and I know the exhaust is new. Anyway, thanks and I'll be back.
Jesse

I'll take the tranny if not spoken for. I live in Redding and could pick up this weekend.

I'll take the tranny if not spoken for. I live in Redding and could pick up this weekend.
let me check on it for you. I had a guy on mud ask first, but then mentioned just wanting the t-case. I'll get in touch w/ him and get back to you.

Rear axle is still available.
Brake Booster/Master cylinder
Lights and lenses
Emblems(spl?)
Front heater assembly
Springs
Stock roll hoop w/ stock pads(great condition)
Tons of other stuff I'm sure. Just ask and I'll find out.
Once again, the rig is torn down to body and frame only.Everything else is going. The only items remaining on the rig are pedals and clutch master cylinder. Pics to follow.

how much for the booster? in good working condition?

how much for the booster? in good working condition?
You've got mail;)