i was wondering exactly which gasket/shim set i should order...please say the one thats 25 :D

heres the link:
SOR PART NUMBERS (http://www.sor.com/sor/products2.tam?xax=31267&pagenumber%2Eptx=1&category%2Ectx=080%2D40&pagenumber%2Eptx=1&page%23%2Ectx=080)

the only thing is that the one for 25 bucks is for years before disk brake.

BTW this is for mini truck conversion.

the other sets (for FDB years) are about 50 and i dont wanna spend that kinda money :crybaby2:

pleeeeeeez i need you help--dad's gettin mad at the mini hub parts lying everywhere!!!!!:smokin: :D

come awwwwwwwwwwn you guys i need some help here!!!!!!

6 views and nothing?????

Sorry, bud, it's the $45 one - kit number 080-40C. You have the large steering arm pattern from the minitruck -> 1/79-1/90 set.

Dave

damn! oh well....looks like i'll be working a little longer :flipoff2: :D

Originally posted by Beanz2
...You have the large steering arm pattern from the minitruck -> 1/79-1/90 set.

but my shims are good (only thing associated with steering arm)

is the rest of the hub the same throuought the years??? if its really different from drum to disk brake, then never mind--the middle range set is more expensive.

what im sayin is, are the hubs/knuckle and associated parts, besides the steering arm, the same on all the years??

TIA!

I used the kits from TPI (http://www.tpilandcruiser.com/lcknuckle.html) 43KIT-2, All gaskets and seals w/o brgs 7509-1990 $36/each

You'll need two kits, but I like having everything there. I still have a set of knuckle bearings laying around.

There was a recent mention of CCOT getting some Australian kits that come with Japanese bearings. Take at look at CCOT's Kit (http://store.yahoo.com/coolfj40/axelrebuildkit.html) $104 on sale is a heck of a good deal.

I like the guys at CCOT, but some of there "inexpensive parts" drive me nuts. I'd rather spend the $$$ from the dealer and get the OEM stuff. Then again I just love the CCOT Calander. :)

Tom

Originally posted by Mr McGee


but my shims are good (only thing associated with steering arm)

is the rest of the hub the same throuought the years??? if its really different from drum to disk brake, then never mind--the middle range set is more expensive.

what im sayin is, are the hubs/knuckle and associated parts, besides the steering arm, the same on all the years??

TIA!

The felt wiper set that goes between the knuckle housing and the knuckle is the same but the gasket and dust seal that go on the spindle are different.

Locking hub gasket between the wheelhub and the locking hub are the same.

Dave

thanks guys!

GAWD I LOVE THIS BOARD! :D