: $1500, Forest Grove Oregon - 1979 F250 (Actually a F350) Supercab 4x4


INSAYN_BCR
04-05-2006, 02:08 AM
So, I have this old truck that the 4wd system works nicely. The truck body itself is not the greatest thing, but there are some good bits on this truck. I am in the process of reviving the carb right now as I let it sit too long and it varnished on me. The idle circuit is still plugged, the rest of the carb works just fine.

Anyhoo, the tags are about to expire at the end of April, and if I don't have to tinker with it to get it to pass DEQ again, I will sell it right now for $1500 complete as a parts truck, and you can do with it as you wish. Otherwise, I will be redoing the rear brakes and finish getting it through DEQ and get new tags on it. Then it will be back on the road for sale @ $2500.

The reason I listed it as an F250/F350 is because it is badged and titled from the factory as an F250, but the Vin and GVWR are clearly F350. Go figure? I tracked this little deal through many different Ford Forums and this is how I
found it to be an F350 in disguise.

You can see pics and more details of it on my website. http://www.blindchickenracing.com/Our_Other_Rigs/Tow%20Vehicles/tow_vehicles.htm

Contact me via E-mail, as I don't get on 4x4 Pirate as often as I should.

Thanks,
INSAYN

Did I mention it is in Forest Grove, Oregon, and I want $1500?

orangefj45
04-05-2006, 08:27 AM
your link does'nt work. so does it have a d60 in the front? a buddy of mine in norcal would be very interested.

INSAYN_BCR
04-05-2006, 09:10 AM
Link should work now.

As for the axle, what is a diffenative way to know what I have in the front.
It has a FAWR of 4350lbs.

INSAYN

orangefj45
04-05-2006, 09:50 AM
how many studs are there on top of the knuckle to hold on the steering arm?

3 studs-dana 44
4 studs-dana 60

orangefj45
04-05-2006, 09:51 AM
yup, link working now.....

INSAYN_BCR
04-05-2006, 01:23 PM
how many studs are there on top of the knuckle to hold on the steering arm?

3 studs-dana 44
4 studs-dana 60

Looks like 3 to me. All in basically a row.

INSAYN

brocbronc
04-05-2006, 10:19 PM
sounds like a dana 44 and you probably do have an f250

INSAYN_BCR
04-08-2006, 11:40 PM
sounds like a dana 44 and you probably do have an f250


It is bagded and titled as an F250, but the VIN and GVWR both point towards F350. Either way, it is $1500 as is right now, as a parts truck.

INSAYN