Ford D60's - What u-joint for the std Yoke?

[87YJ]

I'm putting together my drive shafts and need to get the correct joint on the axle end to mount up with the stock Ford Yoke. I believe the stock stuff on Ford 60's ('79) is 1310. Caps measure just over 1" in dia.

Can someone confirm / offer up a spicer part number?

Need to get parts today and don't have an old u-joint to compare with.

Thx!

Edit: After digging more, now I'm starting to think it might be a 1330 joint. Help!

[00pumpkin]

Mine were 1330 stock, and i think most were either 1330 or 1350

[Trailer Guy]

I'm putting together my drive shafts and need to get the correct joint on the axle end to mount up with the stock Ford Yoke. I believe the stock stuff on Ford 60's ('79) is 1310. Caps measure just over 1" in dia.

Can someone confirm / offer up a spicer part number?

Need to get parts today and don't have an old u-joint to compare with.

Thx!

Edit: After digging more, now I'm starting to think it might be a 1330 joint. Help!
I got my 60 out of a 78 Ford and it had a u-bolt style 1350 joint. I don't know if that is stock, just what is had on it.

[00pumpkin]

1310 series u-joint measures approximately 3 1/4 inches wide. The 1330 and 1350 both measure approximately 3 5/8 wide. The caps are larger on the 1350 than the 1330.

[87YJ]

It looks like Ford was as consistent with the Yoke sizes as they are with most parts.

Are 1350 Yokes readily available so I could retrofit? P/N?