Anyone know who stocks the D300/D20 26 spline CV yoke? Spicer part number 2-4-4341 Apparently spicer has a production problem, and I need to find one to get my buddies jeep back on the road.

Any stock applications for this part that I might find in the junkyard?

Thanks

Jeep J trucks. Scout II's and EB's. Also look at the front yolk compared to just looking for rears. Not sure if a case has a rear 26 spline, that the front is also 26 spline. but if it is, front's are more likely to have CV threaded holes on the ears. Good luck.

Thanks, will check those out. The EB yokes are coarse spline, but I know where there are some scout 2's so I'll check them out.

Found 1 - and only 1! Called six states, and they didn't have any on the shelf, but gave up the name and number of their distributor who only had 1 left. Tom Woods had some, but wouldn't sell one unless you bought a driveshaft. I think I'll be remembering that next time I need a shaft.

Yup. The next time you need a shaft, talk to Jesse.

what about using a front cv yoke off a tj 231. the front yokes are 26 spline i believe and they are a nice swap for a yj 231 so would they also work for a d300.

Try R-Way Tooling, Vineland, NJ

856-692-2218

it is comfirmed. my buddy is using a yoke off the front of a tj231 for his d300. it is cv style that requires the 4 bolts to come in from the t-case side of the yoke.

Thanks, that's good to know

i have a dana300 cv yoke i'll get rid of cheap. pm me if you still need one.

Originally posted by high5
i have a dana300 cv yoke i'll get rid of cheap. pm me if you still need one.

Thanks, but we got one from 6 states's distributor. It's on the way.

Originally posted by oldjeep


Thanks, but we got one from 6 states's distributor. It's on the way.

no problem. i sold both of my d300's when i got my atlas and i still have the cv yoke in the shop somewhere. just thought i'd ask cause i don't need it.

i have 6 in stock - and you don't have to buy the driveline-Jess:D