Or at least part of one ;)

I want to be cool like JR. Anyone have a spare roller fairlead that they will part with?


http://www.pirate4x4.com/forum/attachment.php?attachmentid=235287&stc=1&d=1142911782

make one.. .250wall dom or solid bar stock, a lathe and some roller bearings...


link to this build plz....


chris:cool2:

Might give ebay a go, seen used ones go pretty cheap.

i got a couple if you want them

What's cheap to you?.I've got like 3 of them.Let me know.

anything in here that may work?

http://www.surpluscenter.com/sort.asp?UID=2006041103001486&catname=wheels&keyword=TRSR

anything in here that may work?

http://www.surpluscenter.com/sort.asp?UID=2006041103001486&catname=wheels&keyword=TRSR
I was looking at the caster rollers already.. The problem is that they only allow about 350 lbs.. I am pretty sure that the roller will see a lot more stress than that ;)


Chris, I don't have a lathe handy :sad:

The build is JR's new Bronco.. truly a work of art..
http://www.pirate4x4.com/forum/showthread.php?t=375081

Matt, you have a PM

Just let it slide over your stock cross member. By the time it wears into anything your rig will be cut into little pieces and changed.

lol

hey i thought i had one of the ones like jr but i cant find it, still might be in the garage but i did find this one. ollllldddd school though let me know if it will work for you http://www.pirate4x4.com/forum/attachment.php?attachmentid=239285&stc=1&d=1144783419 http://www.pirate4x4.com/forum/attachment.php?attachmentid=239286&stc=1&d=1144783419

I just ordered rope and a UHMW fairlead so my roller is up for grabs. I was thinking of using a roller or 2 off it though to go to my front axle. Do you just want one long roller? I could part with that after this weekend.

That's what I was thinking Justin. For now I am going to try a boat trailer roller and see how it does.

Mace

Let me know if you want a roller off it.

If you are cuttin it up, then send me one. If not I'll wait :)