Hi to averyboby My name is Nuno Miranda and I'm from Portugal.. Im's running a Discovery 3.5V8i with STD axels at the front with MAxxis Mudzilla 35*13.5*16.. At now i'm waiting for the instalation of an ARB but i need to uprated the rest of the axle..

Can i find the Longfield and Rovertrax at Europe? I think thats the best choise...

Can you help me?
Thanks as sorry about the English... :shaking:

http://img146.imageshack.us/img146/7447/maxxis2iv.jpg

Check with Rovertracks (http://www.rovertracks.com/)

Keith ships stuff to the Mid-East, I don't see why he wouldn't ship to Spain. IIRC, didn't Tobias get some stuff from Keith as well?

Do this:

http://tawayama.com/moabejs2006/images/_SLD7531.jpg

:cool2:

Hi to averyboby My name is Nuno Miranda and I'm from Portugal.. Im's running a Discovery 3.5V8i with STD axels at the front with MAxxis Mudzilla 35*13.5*16.. At now i'm waiting for the instalation of an ARB but i need to uprated the rest of the axle..

Can i find the Longfield and Rovertrax at Europe? I think thats the best choise...

Can you help me?
Thanks as sorry about the English... :shaking:
I believe Michele email spiff@libero.it can supply these in Europe (from Italy). Or else Keith or Michele will post to this thread.

See also these threads on other forums http://forums.lr4x4.com/index.php?showtopic=4165 and http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=71688

Can i find the Longfield and Rovertrax at Europe? I think thats the best choise...
you have tried to look here:
http://www.ashcroft-transmissions.co.uk/

http://img215.imageshack.us/img215/82/landinoxlatant170205rid6xk.jpg

Hi
I do not think that Ashcroft products are realy ment for such big (for Europeans) tyres.
Probably the Longfield would be your best choice, however I have never seen any of their products in action.
I have maxi drive locker/half shafts on my rear axle and Jack Macnamara on the ffront axle on my Defender 110. I have Simex 34/10.5X16 and so far am very happy with the performance of the above.
Outback import in France are selling maxi drive products.

Do this:

http://tawayama.com/moabejs2006/images/_SLD7531.jpg

:cool2:

That looks almost frekin exactly like my front end. I took a double take. Of course, I don't have a freeky wierd panhard loop-da-loop! :grinpimp:

those look like 1550 series ujoints from sunray, did you upgrade?

Tis

those look like 1550 series ujoints from sunray, did you upgrade?

Tis

Oh god no. Arn't those like 6 g's or something?

Oh god no. Arn't those like 6 g's or something?

Or more and the buggy that I saw them on 2 weeks ago was broke the whole time so I never got to see them perform. By the way the site in your sig sucks for machining info:flipoff2: :flipoff2:

-ben

Or more and the buggy that I saw them on 2 weeks ago was broke the whole time so I never got to see them perform. By the way the site in your sig sucks for machining info:flipoff2: :flipoff2:

-ben

What you talking about!? :flipoff2: Take some time and go through there if you need to know something. It has the Rockwell C of every type of material, cutting perameters, ect. That site can tell you how to mill 6AL4V at 12 cubic Inches/min of removal rate. Now how many sites can do that? :eek:

Seriously though, if you need to know something, you can PM me. I can help you mill just about anything.

hi once again.
Thanks for the tips :)
I dont wanna Maxidrive ( to expensive in Europe ) ...Ascrofth...hummm I really don't now...

I want sommething realy cool ... I check some old post's and I think the best thing is realy the longfield e rovertrax conversions.. os the famous Toy conversion..

Here in Portugal we are a litle limited to the UK products or in some cases France, italy...

I friend told me that i can find the longfield at italy and we are now emailing to know the costs..

My discovery have a Zf autobox; KAM 4,75 R&P; Rear detroit Locker and HD Half; ARB in the front without any modd yet... and running the MAxxis its a real Fu"#$ thing :)

Thanks to everyone and once again sorry about the english

Do this:

http://tawayama.com/moabejs2006/images/_SLD7531.jpg

:cool2:


Can u explan what have u done?:D

Can you help me?


Hi Nuno,
PM or email me
:)

P.S.
Nice rugged Disco you have there...

Can u explan what have u done?:D

No, I can't...because it's not my truck. I can try to find out what is going on in that front end and report back here.

I am fairly sure that they are Ford 9-inch center sections, but from there outwards I have no clue what's going on.

Lemme see what I can dig up about it.

They look like sunray's 9s???????

They could be...I dunno.

Is it the angle or are those some freeking huge U-joints? I mean the yoke looks almost as big as the center section?

Pete

Looks to me like a 9 inch housing with custom 60 knuckles and sunray axle shafts.

those inner C's look interesting...wonder how much they are. they look beefy and look like they may be easier(cheaper) to manufacture then the dedenbears (sp?).
I wonder what kind of hub they use? standard D60 or are those one-offs as well...the bottom of the hub looks like some sort of custom kingpin. where did you get the pic?
just saw the sunray website. I guess it is one of their 1550 set-ups.. anybody price just the inner C's and outer hubs?

Generally I pay about $600 per side for both C's Crane or Dedenbear..
Spidertrax has some nifty new stuff coming on too!

where did you get the pic?

Ummmmm....I took it.

Looks like you guys are figuring it out quicker than I am. Good on 'ya. :flipoff2:

Do this:

http://tawayama.com/moabejs2006/images/_SLD7531.jpg

:cool2:

I am pretty sure that is Carey Steiners truck.

I am pretty sure that is Carey Steiners truck.

DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING DING !!!!!!!!!!!!!

WE HAVE A WINNER!!!! :D

http://www.sunrayengineering.com/main.html

Carey goes by TuffD90 on this board but I don't think she is active any more. Her 9/60 axles were built by Sunray a few years ago but weren't originally the 1550 series stuff(I don't think anyway). When I spoke to Lance six months or so ago about some of the work he was doing on my axle, I asked him about some of the things they had done to her truck and he didn't mention any recent work.

Tis