NorthWestFab
04-20-2006, 08:56 PM
NorthWest FabWorks newest product. 1" Zero-Rate leafs. $45 per set
These are 100% CNC machined billet steel and come with all the grade 8 hardware needed. These Zero-Rates will fix a sagging rear end or get that extra lift needed in the front. Since these bolt through your leaf pack and are not blocks they can be safely used on your front or rear axle. They are also drilled to allow axle relocation 1" or 1.5" forward or backwards. These are 2.5" wide and will fit a huge variety off applications.
http://northwestfab.com/images/zero-rate.JPG
For installation you will need to have 1" of extra thread on your current U-Bolts or you will have to purchase new ones. If you are using the axle relocation feature you will have to redrill a hole in your U-Bolt plate. Another thing to keep in mind, if used with cross over steering your leaf pack will be 1" taller. NWF carries the tallest one peice D60 steering arms available on the market if you need that extra bit of clearance.
-The Guys,
NorthWest FabWorks
250 248 6024
These are 100% CNC machined billet steel and come with all the grade 8 hardware needed. These Zero-Rates will fix a sagging rear end or get that extra lift needed in the front. Since these bolt through your leaf pack and are not blocks they can be safely used on your front or rear axle. They are also drilled to allow axle relocation 1" or 1.5" forward or backwards. These are 2.5" wide and will fit a huge variety off applications.
http://northwestfab.com/images/zero-rate.JPG
For installation you will need to have 1" of extra thread on your current U-Bolts or you will have to purchase new ones. If you are using the axle relocation feature you will have to redrill a hole in your U-Bolt plate. Another thing to keep in mind, if used with cross over steering your leaf pack will be 1" taller. NWF carries the tallest one peice D60 steering arms available on the market if you need that extra bit of clearance.
-The Guys,
NorthWest FabWorks
250 248 6024