|
Flatty 04-11-2002, 09:16 AM I am building my own spring hangers and I need to know the ID of a Wrangler Spring eye so that I can get the right size tubing. Does anyone know this measurement. I know it is 2.5" wide, and close to 1.5" ID, but I need the exact measurement. Dimitri Scout Dude 04-11-2002, 09:28 AM There are 2 sizes..I use the smaller ones for fabbing things..they are 1.25" od on the bushing. Flatty 04-11-2002, 10:18 AM Can you give me the application on this? SOunds like the way I need to go, but I also have to get all the bushings. What had this busing, or if you have a part # that would be great. Dimitri Scout Dude 04-11-2002, 10:25 AM I don't know the part number because I alway get them from Foothill Offroad and they just have a loose bin of bushings. It is the smaller YJ bushing. 1.25" od, with two, ~2.5" wide. And both the 1/2" bolt and 9/16" sleeves are available. I use 1.5 .120 wall dom for most of my stuff and 1.75 .250 for heavier, non supported items (tranny crossmember, etc.) | |