d44 8lug-5lug

[Broncoo]

78"f250 d44 8-lug to 5x5.5" (f150)
will hubs/rotors off a 91 f150 fit?
do i need to get smaller dia. spindles?
i know i need new caliper brackets

is the stub shaft going to be too long?

also on the 8 lug d44 with dual piston calipers is the caliper more than one piece?

thanks

[bobbywalter]

78"f250 d44 8-lug to 5x5.5" (f150)
will hubs/rotors off a 91 f150 fit?
do i need to get smaller dia. spindles?
i know i need new caliper brackets

is the stub shaft going to be too long?

also on the 8 lug d44 with dual piston calipers is the caliper more than one piece?

thanks

the hubs and rotors should work

the ttb shit is way different in the way the spindle mounts and there are brake mounting differences through the years as far as calipers are concerned.

the outer stubs should be ok, theres a freak ranger hat lockout type setup 86-87ish that has a freak size outer.


from what your saying i glean you have a d44 with 8 lug that is getting a 5 lug, so the outer stub will/should work.

[GubNi]

You can probably trade free if you post on www.fullsizebronco.com. Most people there have 5 lug and want to go to 8 lug.

[Broncoo]

all i have for the 8-lug is the caliper brackets on that particular axle. i have another project on the go that is keeping the 8 lug stuff, and i am havin trouble finding a compleate caliper setup. all the auto parts places i've looked only sell the dual piston assembly and not a complete caliper?

[Broncoo]

okay calipers off a 3/4ton 2wd fit perfect don't even need any grinding