|
Little Red Zuk 05-09-2006, 03:04 PM I just acquired a Weber pulled off another 1.3, but was wondering if anybody had the original instructions, or can e-mail or post a pic of their weber installed? The mass of vacuum lines under the hood makes me nervous I found some of the technotes through google, but couldn't find any good pictures. e-mail to madjeeper87xj@yahoo.com. offroadmission 05-12-2006, 06:18 AM I just acquired a Weber pulled off another 1.3, but was wondering if anybody had the original instructions, or can e-mail or post a pic of their weber installed? The mass of vacuum lines under the hood makes me nervous I found some of the technotes through google, but couldn't find any good pictures. e-mail to madjeeper87xj@yahoo.com. I am in the same boat. Please help. Little Red Zuk 05-12-2006, 09:03 AM FWIW I'm going to tackle it blindly this weekend. I'm just going to take my time, and have lots of vacuum plugs. Gaskets finally came in so here we go. If I get 'er going without losing my remaining hair, I'll let you know. xanthias 05-12-2006, 01:57 PM Have a look through my gallery here: http://www.texas4x4.org/gallery/Samurai You'll see some of what you want, I think. Note my carb was mounted in reverse, which many folks do with Webers to assist in high-angle operation. | |