Shims Needed

[wiringnatzi]

Where is everyone getting their shim kits to do gears on R200A, H233B axles???
Any help would be great....

[Zukidriver]

H233B is a drop out 3rd member like toyota. You use adjuster nuts to set it up. As for the R200A, probably the only place is Dealer, or just match them up. Can't be anything that special.

[wiringnatzi]

Yes its a drop out carrier but what if you need pinion shims to get the pinion depth correct, the adjusters on the side are adjustable, yes..
The stealership can oly get bags of 10 of 1 size, and I don't know what sizes until I am setting it up the order 10 and wait a week then need a little smaller and wait another week, get real, where is the shims in the install kit like any other axle out there????

[Zukidriver]

I doubt they would have it, but it may be worth a call to Randy's Ring & Pinion.

[Packman5280]

no install kits for Nissan axles, and I thought it was a crush sleeve not a shim.

[sha_ba_do_bang]

you still need shims if it is a crush collar, the crush collar controls the amount of pinion preload

the shims still set the pinion depth