Got an 84 K10 with a goodwrench 350 in it and headers and i need some way to mount the power steering pump.

The problem now is that with the headers the old brackets dont work because of the size of the exhaust manifolds and where the placement of the brackets were. I was wondering if anyone could post a pic of what they did with a sbc and headers when mounting the power steering pump.

I will try to get some pics of what i got tomorrow or monday.

You can just make a spacer to go behind the bracket to bring it out to the thickness the manifold would have been. If you can't make a spacer...a large nut will do.

I welded some washer together to make a spacer the thickness of the original manifold minus the thickness of the headers and used the original manifold bolts in those holes. Black star=no pics

Something like this?
http://members.aol.com/randomquikfingrs/private/pwr.jpg

Something like this?
http://members.aol.com/randomquikfingrs/private/pwr.jpg


thats close, my brackets are a little different though. I got the idea now, just need to find that bracket in the bed of my truck. I think that mine has 2 bolt holes but if i can get some spacers from NAPA or something similar i believe that i can hook it up.

i got an 87 and had some problems mounting..if you want, drop me an email or im asap
loveparkrestinpeace@gmail.com
or aim krankedxrider or whatever and i will take a few pics on how we did it with mine..i can pass em on..i know we had to use quite a few wasgers