You may have noticed the giveaway we are doing on Diff Covers.....

[Gravel Maker]

But you may not have noticed we have lowered our prices for them. We have been getting a very serious demand for them and quantities like these allow us to lower the prices. We still are selling mostly Kits to shops but fully welded covers are catching up.....

This is one of the covers we are giving away but it looks so good powdercoated that I think it will be our official advertising cover! Next to it is a sample of the Kit so you can really see how thick they are!
http://www.ruffstuffspecialties.com/gallery/albums/userpics/10001/normal_shingydiff.jpghttp://www.ruffstuffspecialties.com/gallery/albums/products10/normal_d44cover2.jpg

We only make these in a 3/8" thick model, it only costs' us $2 more than if we made it out of 1/4" so why bother with 1/4" at all? We also make these exclusively from A50 Plate, it is a very dense Steel and again, it isn't really that much more to make them that way so why not?

The new prices are:
Dana 30 Welded, $100, Kit $70, This one has a 1/2" ring!
Dana 35 Welded, $100, Kit $70, 1/2" ring here too!
Chrysler 8.25" Welded, $110, Kit $75, another 1/2" ring!
Dana 44 Welded, $100, Kit $68
Dana 60 Welded, $110, Kit $79
14 Bolt Welded, $120, Kit $88
Ford 8.8 Welded, $110, Kit $77.25, 1/2" ring
Toyota FJ40/45/55/60 Welded, $110, Kit $79, 1/2" ring

$5 for Drain Plugs
$5 for Countersunk Bolts

We are adding 4 more covers to the lineup in the next 2 months and 10 more over the next 6 months so if we don't make yours yet keep checking back.

OH!:eek: Did I forget to mention that the PBB10 10% discount is good on these and anything we sell? My bad:D , and that shipping is only $9.45:rolleyes: for both front and rear because we can fit 2 in a USPS Flat Rate Box!

We make the Diff Covers you want!

[zachv]

Dan, these are absolutely SICK!!! Nice work and great prices.

[Gravel Maker]

these are seriously tough.....Holly thinks so....
http://ruffstuffspecialties.com/gallery/albums/model1/normal_5.jpg

[Gravel Maker]

She was drawing for a winner on CK5.....Got someone else for pirate......perhaps someone a little hotter......

[Jason M]

LOL

I have one of the weld together ones for a 60..

almost done (don't wat to cut Dan off for a pertty unit..)

I'll try to post pics by mon...

[geberhard]

Dan, order coming up (GF will be ordering for my bday :). I am also checking on your site on shock mounts, and will check on other tabs and flanges. I may need to hold off on the rest of teh stuff for now, but want the dif cover.

Thanks!

Gui

[Gravel Maker]

Looking forward to it.

[ACHASE6002]

Dan, Do U Know The Status Of An 8.8 Cover

[zachv]

Dan, Do U Know The Status Of An 8.8 Cover

Word. As soon as the 30 and 35 units are ready please let us know, Dan, so I can do that batch order.:smokin:

[Gravel Maker]

If it works out I will get 1 off to you immediately.....the other 2 should be done during the next week.....

[zachv]

You are 'da man.:cool2:

[greensahara]

do you have d 30 yet

[Gravel Maker]

D30, D35, and 8.25 very soon, 8.8, fj40, 10 bolt, 12 bolt, 9.25, all in the pipeline, however the D30, D35, and 8.25 are coming first....

[Gravel Maker]

Check it out in the 4X4 Tech section.....Cover of your choice and a couple of gift certs.....

[k5chevyblazer]

anything for a Sterling yet?

[Gravel Maker]

Check our posting in Axles for the production scheduling.....

[trollporter]

Just ordered a D60 and 14BFF covers from Dan. These things are super beef. Dan is a great guy to deal with and really knows his products.

Hey Dan, Can Holly autograph my covers?

troy

[Gravel Maker]

Sign up now!

[Gravel Maker]

And the Cruiser cover should be ready to ship Friday! No pics, not even 3D renderings until it is ready! This is the monster cover we have been talking about for the last 6 months, an entirely different approach for Diff Covers, revolutionary if I might say! Watch for it, 8.8 about a week later.....

[Gravel Maker]

It takes us a little while to get them right!:)

All of our Covers meet the 3 most important criteria of Strength, Quality, & Price.

[Gravel Maker]

but I'm not saying which! They will be overbuilt and guaranteed forever. Just like everything else we make!

A mention about the covers weight.....Someone said they were too heavy?

Well, I can't say much for others but I don't even want a cover to wear out, A50 plate takes the extra abuse and that extra 1/8" puts the nails in the coffin. Also, it isn't rolling or sprung weight and in the era of top heavy vehicles you might like to add 7 or 8 lbs down low. That "but they're too heavy" argument is no argument:smokin: !

[Gravel Maker]

Thought you might want to take a look again.....

[Gravel Maker]

The recent addition of the $5 options are very popular too, about 60% of the new orders are getting both options.......If I didn't make them I'd buy 'em!:D

Remember, Strength, Quality, & Price........

[rpraterxj]

PM sent, getting ready to order a set!

[Gravel Maker]

PM sent, getting ready to order a set!

All orders are taken from the website, taking orders from PM's takes too much time and delays the shipment, we can't be watching every site for orders, we are just too busy. The discount code is PBB10, remember it!

[Gravel Maker]

2 now and 3 more over the next 6 weeks! We are up to 8 now, if we don't make yours yet its' comming soon!