PDA

View Full Version : Custom beadlocks

DIY4X
05-17-2006, 06:15 PM
Just a reminder for you all. Custom beadlocks. Here's a pic of a set we did for a club. I believe it was 3 matching sets.

http://www.diy4x.com/photos/jeeplocks.jpg

As always custom is on a case by case basis but I DO NOT charge for drawing the beadlock or any extra set up time. Our custom beadlocks are usually comparable in price to our off the shelf sets.

Ranging from $65 per wheel up to $85.

Another step we do on our beadlocks is to round the corner off on the outer ring where it will meet the tire, This prevents any sharp corner from gouging your aired down tire.
Seb
05-26-2006, 04:30 PM
Is that 65-85$ per wheel for the beadlock, and the customization?

If so, PM me and I will PM what I would like.

Thanks
DIY4X
06-01-2006, 06:55 AM
Yep, that's what that is.
DIY4X
06-01-2006, 06:59 AM
PM sent.

Thanks.
4x4koko
06-30-2006, 06:57 PM
ttt
stallion85
07-25-2006, 07:30 PM
ttt
rckjeep
07-31-2006, 01:37 PM
do they sit inside the rim or on top of it. Seems like the inside ones make more sense to me. But if you have a reason for going to the top please fill me in.
RufftyTuffty
07-31-2006, 08:01 PM
His website...

http://www.diy4x.com/beadlocks.htm

~Mike
cobronco69
09-08-2006, 06:32 PM
anybody ordered up a set of these?
DIY4X
06-19-2008, 06:47 AM
our lowest price beadlock is only $45 per wheel!!!!
troyman
06-26-2008, 02:05 PM
Can you do aluminum outter rings? What would the price be for something like that? 15" ring just standard with no design.
racer85304
06-26-2008, 08:20 PM
std 15 in bl rings for outside rims.

to business 85304
turbosniper1
06-26-2008, 09:31 PM
Quote on custom wording on set of 4 of the 15" rim with a wide ring... sent to 81506 please??
DIY4X
07-02-2008, 08:05 PM
Need to know what they have to say to quote accurately.

Call me at the shop and we'll sort it out.

712-479-2251
troyman
07-03-2008, 12:59 PM
Can you do aluminum outter rings? What would the price be for something like that? 15" ring just standard with no design.

Is that a no? ;)
DIY4X
07-06-2008, 05:27 AM
Is that a no? ;)


Sorry, missed your post.

Not a no, however, we have quoted them several times in the past and they are pretty rediculously expensive. So far, nobody has done it.
racer85304
07-06-2008, 01:55 PM
std 15 in bl rings for outside rims.

to business 85304
DIY4X
01-05-2009, 09:30 AM
Btt
cdansan
01-06-2009, 04:26 PM
Price and shipping to 05482 for 4 16" inside the rim 5 hole or plain.
Which design is the $45 per wheel ?
Thanks, Dan