View Full Version : 89 hb 4x4 what rear end?
chuck's99
05-18-2006, 10:52 PM
i have just bought a 89 nissan truck 4x4 and i was wondering if the 89 has a h233b rear or the c200 rear end i was planning on doing a SAS swap since i already have the waggy d44 front just trying to decide to stay with the rear i have now or go with something else? also is there any lockers or LSD's for the rear that i have now. thanks
nissannut
05-19-2006, 07:49 AM
You have the H233b if its a removable pumpkin type. 31 spline.
If its a SE model you should have a LSD. You can use a powertraxx lock right or ARB air locker. Detroit lockers where available.
XterraGuy
05-19-2006, 12:23 PM
V6 has the H233B rear, 4-cylinder 4x4 had the C200 until 95 or 96.
Can't use the Lockright or Detroit w/ an LSD rear, requires the open carrier.
bbagwell
05-19-2006, 02:07 PM
My 1994 with a four cylinder had the H223B rear end. I put a lock-rite in it. The box for the lock-rite said for a truck with a V-6.
chuck's99
05-19-2006, 08:50 PM
my truck is a 4 cylinder 5 speed .i was thinkin of going with a toyota rear because i saw the price on the gears for those rear ends for the nissan and theyre expensive
Exactely, and also if you use a standard rear end the parts will be available from the corner drug store. I wouldn't suggest a Yota rear though because imho they are not an upgrade, just cheap.
chuck's99
05-21-2006, 08:08 PM
so i guess i have the c200 rear end? is this axle weaker than the h233b also is there any locker out there for this axle?
XterraGuy
05-22-2006, 11:32 AM
The C200 has the bolt-on rear cover. It's a pretty decent axle in its own right.
Only locker for it is the ARB.
chuck's99
05-22-2006, 10:19 PM
is there any one that sells a 5.29 or 5.13 gear for the h233b or the c200 rear since i was planning to run 35's on the truck with a 4cyl?
nissannut
05-23-2006, 07:33 AM
is there any one that sells a 5.29 or 5.13 gear for the h233b or the c200 rear since i was planning to run 35's on the truck with a 4cyl?
Yes on the 5.14s. So what do you have? a C200?
http://http://www.4x4parts.com/public_html/shop/index.php3?page=shop/browse&category_id=006db9d44bc514cd3bddc5aa22bea09e&ps_session=47174ca03e6ca828d22085055ddf7a23
chuck's99
05-23-2006, 07:05 PM
i looked under the truck i dont have the drop out member so it must be the
c200 rear with the rear cover.im probally going to put a h233b rear in it or something else other than the rear i have now.
I have h233b in my rear of my 1986 PU and I cannot find Detroit nor LockRite for it. Looks like the only option is ARB now, which is little bit pricey for me. I have stock LSD in my h233b and I cannot really go with LockRite - I'd have to change diff case to open type. But that's ok since it's just my DD :)
DirtJumper
05-25-2006, 09:45 AM
Would the 1990 SE model have the LSD as well?
nissannut
05-25-2006, 11:13 AM
Would the 1990 SE model have the LSD as well?
Most if not all SE trucks and pathys have LSD in the rear 86.5+.
DirtJumper
05-25-2006, 08:06 PM
Most if not all SE trucks and pathys have LSD in the rear 86.5+.
Thanks!
XterraGuy
05-25-2006, 09:57 PM
Post your VIN and I can tell you if it had LSD or not.
DirtJumper
05-28-2006, 08:58 PM
Post your VIN and I can tell you if it had LSD or not.
PM'd you.
Thanks!
XterraGuy
05-29-2006, 09:31 AM
Sorry, I can only run the US VINs. Had a line on the Canadian version of the software but it fell through...
DirtJumper
05-29-2006, 09:45 PM
Sorry, I can only run the US VINs. Had a line on the Canadian version of the software but it fell through...
Thanks for trying anyways man!
vBulletin® v3.7.3, Copyright ©2000-2009, Jelsoft Enterprises Ltd.