We have decided to offer the parts that we use to make our products to the average DIYer who wants that pro look to their home creations. With these parts you can get some basic tube from your own steel yard and make your own bumpers without all of the hassle of making the mounting brackets.

Let us wrap you up in savings deliciousness.
http://www.atozfabrication.com/gallery2/d/282-1/P7194997.jpg

THE MAIN LISTING (http://www.atozfabrication.com/store/home.php?cat=263)

REAR BUMPER BUILDERS KIT (http://www.atozfabrication.com/store/product.php?productid=16178&cat=275&page=1)
http://www.atozfabrication.com/store/images/P/yjtjmountkitab.jpg

FRONT YJ/TJ BUMPER MOUNT KIT (http://www.atozfabrication.com/store/product.php?productid=16180&cat=275&page=1)
http://www.atozfabrication.com/store/images/P/frntbumpermount-2-01-01.jpg

ULTRA BEEF CLEVIS MOUNTS (http://www.atozfabrication.com/store/product.php?productid=16175&cat=275&page=1)
http://www.atozfabrication.com/catalog/images/atoz/clevis_mounts.jpg

COMPLETE TIRE CARRIER BUILDERS KIT (http://www.atozfabrication.com/store/product.php?productid=16413&cat=274&page=1)
http://www.atozfabrication.com/store/images/P/tirecarrierkit.jpg

TIRE CARRIER HINGE KIT (http://www.atozfabrication.com/store/product.php?productid=16138&cat=274&page=1)
http://www.atozfabrication.com/store/images/P/100_3749b.jpg

And there is more on the main page. Let us know how we can help you on your fabrication projects as we can do custom designing and forming.
:thumbsup:

PM me a price on 4 clevis mounts to 89131

I am having a brain fart on how the bumper mounts work. Could you help out a confusee?

PM me a price on 4 clevis mounts to 89131

If you follow this handy dandy clickable link (REAR BUMPER MOUNT KIT (http://www.atozfabrication.com/catalog/index.php?main_page=product_info&cPath=6&products_id=32&zenid=fc725348908ba7bbe9775ca1355fc792)) the secret information will be given to you.;) All you have to do for a shipping quote is add what you want to your cart and click on the Estimate Shipping button for your area.

The rear bumper mount kit is designed to have the 3/4" solid units welded to the backside of a rectangle tube bumper and then you can use studs or bolts going through the crossmember. The other small tabs are 1/4" plate with the slotted hole to be used to tie the bumper into the lower frame holes on Jeeps. I will try to post a better pic later of when they are welded on one of our bumpers.

Thanks.

Bump For Ya, Stuff Looks Nice, I Like The One Piece Front

Bump For Ya, Stuff Looks Nice, I Like The One Piece Front

Yeah, I was pretty happy with them when we got the first batch. My goal was just to make the processes as easy as possible for my guys and to have a product that looks clean when finished.

Thanks for the orders everyone--we appreciate it.:cool2:

For the tire carrier, do you weld a washer inside of the sleeve/hub do keep pressure on the lower bearing...or do you do something different? Great pricing by the way...and a lot easier than using a D44 hub/spindle/locking hub...

For the tire carrier, do you weld a washer inside of the sleeve/hub do keep pressure on the lower bearing...or do you do something different? Great pricing by the way...and a lot easier than using a D44 hub/spindle/locking hub...

Great question, and thanks. The hinge unit is a piece of DOM tub with the bearing bores CNC machined to tightly fit the bearing races, providing the support you are mentioning.

Please let me know if we can help with anything.:cool2:

What are the dimensions on the clevis mounts?

The clevis mounts are 1" wide and 2" tall with CNC machined rounded ends and a 15/16" hole to fit standard 3/4" shackles with a 7/8" pin. They are 4.5" long to fit through a 2" thick bumper, but we also have some that are 5.5" long for 3" bumpers---e-mail/call for pricing on them.

Thanks.

What's the thickness of the plate for the front bumper bracket? 1/4", 3/16"?

What's the thickness of the plate for the front bumper bracket? 1/4", 3/16"?

The front bumper brackets are CNC formed from 3/16" plate. With all of the weld area available and spots to tie-in the clevis mounts I feel that 1/4" would just be useless overkill, unless your Jeep has Rockwells and 44" tires, at which point you would want another design altogether.

Thanks.

how much for 4 clevis mount to 85705

how much for 4 clevis mount to 85705

PM sent with a shipped quote. The clevis mounts are $12.95, plus shipping, for a set of two.:smokin:

PM me a price shipped to Indy 46235 for:

2x Clevis mounts
1x tire carrier hinge
1x wheel mount plate

Thanks!
Aaron

I just called to order a pair of clevis mounts. The guy on the phone was really friendly so I asked him a few questions about Rausch Creek and Paragon. He said he could have them to me by this weekend. Based on the ordering process I'd buy from them again.

Zach, any way to loer the shipping costs? Interested on stuff, but the shipping is killing the deal. I.e. $25 for two clevis mounts, but shipping is $32 :( Let me know. I think you can get more business and save us som bucks using for example a USPS flat rate box.


Quick Q, the clevis prices are individual or per pair? Nice work!

Gui

Zach, any way to loer the shipping costs? Interested on stuff, but the shipping is killing the deal. I.e. $25 for two clevis mounts, but shipping is $32 :( Let me know. I think you can get more business and save us som bucks using for example a USPS flat rate box.


Quick Q, the clevis prices are individual or per pair? Nice work!

Gui

Gui, thanks for mentioning that. I have to get my webmaster to change that in the site. The shiping on the site is high for the fab parts for some reason. I have been working on $8.50 as a flat rate for anything in the Fab parts area, except the front bumper mount. That I need to quote on an individual basis. What I recommend until we get the situation fixed is to call me in the shop of shoot me an e-mail for ordering instructions.

BTW, the clevis mounts are $12.95 for a pair. Also, we are looking for additional dealers so if there are shops out there that just need fab parts we can help them out. Call me for details and special pricing.

It looks like the flatrate shipping will be ready in a few days.
Thanks.
Zach.

Zach, awesome, please keep us posted!

Gui

Can I get a qoute for the Tire Carrier Hinge Kit, T Handle Assembly, and Wheel Plate shipped to 66030? Your website doesn't work where I am, and I don't have a phone here :eek: Thank you much.

Can I get a qoute for the Tire Carrier Hinge Kit, T Handle Assembly, and Wheel Plate shipped to 66030? Your website doesn't work where I am, and I don't have a phone here :eek: Thank you much.

Did I ever get back to you on this? If not, here we go:
Tire Carrier Hinge Kit--$39.95
T Handle Assembly--$23.00
Wheel Plate--$17.99
shipped to 66030--$7.50x3=$22.50

Total--$103.44

Let me know if that works for you.
Thanks.

Do you offer a PBB discount :D

Do you offer a PBB discount :D

We do on the complete parts that we manufacture, but we cannot on the Fab Parts as we are too close to our cost. If you are an AtoZ Fabrication dealer we do offer volume discounts.

If you follow this handy dandy clickable link (REAR BUMPER MOUNT KIT (http://www.atozfabrication.com/catalog/index.php?main_page=product_info&cPath=6&products_id=32&zenid=fc725348908ba7bbe9775ca1355fc792)) the secret information will be given to you.;) All you have to do for a shipping quote is add what you want to your cart and click on the Estimate Shipping button for your area.

The rear bumper mount kit is designed to have the 3/4" solid units welded to the backside of a rectangle tube bumper and then you can use studs or bolts going through the crossmember. The other small tabs are 1/4" plate with the slotted hole to be used to tie the bumper into the lower frame holes on Jeeps. I will try to post a better pic later of when they are welded on one of our bumpers.

Thanks.
Okay, Nevermind, no way in hell I would buy from you..


Too many other options.

Thanks I will order from your web page

Okay, Nevermind, no way in hell I would buy from you..

Nice way to take two months to respond with a witty remark... :rolleyes: Please excuse me for thinking you had a sense of humor. It will be my pleasure not to work with you Jason M. :flipoff2:

BTW, we love for customers to call and order so that is a great option, but some people do not have the time, or shop late at night, and prefer to use the site for pricing and shipping quotes.

Thanks to everyone that has ordered. I did not think the Fab Parts were going to be so popular, but we have had great response for them and love helping out the DIY crowd.

I did not think the Fab Parts were going to be so popular, but we have had great response for them and love helping out the DIY crowd.

Could you update your web page to give details like size? I was looking at the some the products like clevis mounts, but from the photo I can't tell for sure if they are 2" wide and 4" long with a 1 inch hole. ( best guess)

The Tire Carrier Hinge Kit. I would really like a bit more of a write up, like you start with a 1" dia. hot rolled rod and lathe it down to fit some Chevy astro van front wheel bearings. Then use a piece of DOM tube to fit the races in ( might even need milling there too ( not sure) I don't see races in the photo so are races even used? I will call too.

Could you update your web page to give details like size?

You are 100% correct, and thanks for the reminder. I suck at websites so I keep on having to ask the guy who made my site to do updates and I have been forgetting to get him the correct info. Let me try to answer your questions.

The clevis mounts are made from solid 1x2" HR steel. They are cut to 4.5" overall length to fit a 2" wide bumper (http://www.atozfabrication.com/catalog/index.php?main_page=index&cPath=3&zenid=07f57662065c475a46456379d01e7dce), but we also have some that are 5.5" long for 3" bumpers, and the round end is milled with a 1" radius. The hole is 1". These are designed for 3 3/4 Ton clevises with a 7/8" pin.

The tire carrier hinge assemblies use this spindle:
http://www.jeepforum.com/gallery/files//1/3/0/3/7/SPINDLEJPEG.JPG

They include both bearings, with races, the nut, the lower grease seal, and the upper dust cap. The hinge tubes themselves are machined from 2.25"OD DOM tube and the inner bores are machined to accept the bearing races.

I hope that helps, let me know if I missed anything..
Thanks again.
Zach.

Zach,

Just sent paypaql for a pair of clevis :)

Thanks,

Gui

Hi Zach,

When you get a chance can you check teh status of my order? I have note received yet, ordered through yuor site and paypalled the same day. I will try giving you a call later this morning if I do not hear back.

Thanks,

Gui

Gui, your order is waiting to be picked up tomorrow via USPS. I apologize for the delay as these seem to get sold out real quick.
Let me know how you make out with them.
Thanks.

Gui, your order is waiting to be picked up tomorrow via USPS. I apologize for the delay as these seem to get sold out real quick.
Let me know how you make out with them.
Thanks.

Zach, no problem an dthanks for the heads up, look forward to getting them. "...make out with them.." I do not want to make out with them, I have a girl, I am not like that, hahahah :D Just teasing!

Thanks for the heads up!

Gui

Hey, that 1" hole is a tight fit for me when I'm excited.:eek: :grinpimp:

Argh! no, I do not want the mental picture!!! If my clevis arrive sticky I will know what happened :D

BTT

ZACHV,

Please send a PM for 4 clevis mounts and shipping ($8.50 per pair or for all four?) to 45244.

Thanks
TomH

We can flat-rate ship two pair for $13 for a total of $38.90. That order would need to be called in for the reduced shipping. If ordered through the site it would be $7.50 per set for shipping.

Notice: the clevis mounts and tire carrier hinge kits will be going up in price soon as my machine shop is raising my costs. We are looking at $17.50 for a pair of clevis mounts and $42.50 for the tire carrier hinge kits. The change will take effect as soon as I can get my webmaster to find some time to make changes so if you need them it would be smart to order before the change takes effect.

Thanks.

can you give me a price on a tire carrier hinge and 2 clevis' and mounts. and do you have tire carrier hinges... and could I get a pic of it.


thanx

All pics can be found on our Fab Parts page. (http://www.atozfabrication.com/store/home.php?cat=263) Shipping can often be combined on mutliple orders of the smaller items if you cal to order-usually 2-3 items can go for $13, 4-6 items in two boxes for $26, etc.

Thanks.

Zach,

Got the clevis tabs...

http://www.hachiya.us/images/jeep/clevis%20-%20outline.jpg

http://www.hachiya.us/images/jeep/clevis%20-%20welded.jpg

http://www.hachiya.us/images/jeep/clevis%20-%20finished.jpg

Thank you.. These items are great. Well made....Thanks again...

Another happy customer. Thanks, guys and gals.:D

How much for:
1 hinge
1 set of clevis tabs
1 wheel plate

Shipped to 90720

And do you offer any other latch for a tire carrier? Not a big fan of that T handle idea.

How much for:
1 hinge--$39.95 currently
1 set of clevis tabs--$12.95 currently
1 wheel plate--$17.99

Shipped to 90720--$22.50 if ordered on our site

And do you offer any other latch for a tire carrier? Not a big fan of that T handle idea.

We do not offer any different latch systems, but you can always buy DeStaCo latches from MSC, et al.

BTW, we can do a little better on the shipping if ordered over the phone and I am awaiting my web dude to make some changes on the Fab Parts pricing so the listed prices are only good until he makes the changes.

Thanks.

Just ordered some clevis mounts. I will see how things go. I will be ordering more in the future.
Thanks
Aaron

We just recieved our newest batch of clevis mounts so we should be getting caught up on orders pretty quickly.

Thanks, guys.:cool2:

Thanks Zach!

http://www.the-jersey-devil.com/photopost/data/636/101a2z2.JPG

ATOZFABRICATION ROCKS!!!!!!



:smokin:

pm me a price on 2 clevis mounts to 93004 thanks corey

The clevis mounts are $19.95 per pair and shipping is a flat $8.50 for one pair and $14 for 2-5 pair, if ordered by phone, unless ordered in a quantity that UPS would be better.
Thanks.

New in the arsenal are DIY beadlocks for 15", 16", and 17" wheels (http://www.atozfabrication.com/store/home.php?cat=282):

http://www.atozfabrication.com/store/images/P/bead_locks-01.jpg

Zach, I never did end up getting any of the bumper clevis mounts. Can you shoot me a price for a pair shipped to 61614? $28.45?

Thanks!

This young lady said to order your stuff now to build your junk.

http://www.atozfabrication.com/gallery2/d/278-1/P7194978.jpg

...and don't forget that everything we manufacture is Made in America, with American labor...just like this beautiful young lady. ;)

http://www.atozfabrication.com/gallery2/d/292-1/P7195028.jpg

for 98 tj to zip 85040 business

Thanks for the orders and don't forget to mention that you are a PBB member for the special pricing.:grinpimp:

I have a 3" wide frame section I want a clevis mount to go through, can you make a longer one? 95826

thx

I just read your posts and it says you have a longer one but not on your site, so how do I get the longer ones?

I have a 3" wide frame section I want a clevis mount to go through, can you make a longer one? 95826

thx

I just read your posts and it says you have a longer one but not on your site, so how do I get the longer ones?

Call me first thing on Monday to order as we are just finishing a batch of the regular ones we make and I can make the longer ones for you before we change the setup on the mill for the next batch of whatever we need to make.
Thanks.

Hello:
I need a mega tyre carrier kit shipper to spain. i know its going to cost some extra buck but Im not in ahurry so send it ground
Thanks
ZIP 28250, Madrid, Spain
ED

Shipping would be $45 via USPS and you would need to order over the phone at 570-385-3931.
Thanks.

Hello:
I need a mega tyre carrier kit shipper to spain. i know its going to cost some extra buck but Im not in ahurry so send it ground
Thanks
ZIP 28250, Madrid, Spain
ED

Any chance you guys are going to make one of those tire carrier wheel mounting plates for 8 on 6.5?

Any chance you guys are going to make one of those tire carrier wheel mounting plates for 8 on 6.5?

We now have 6 and 8-lug wheel plates (http://www.atozfabrication.com/store/product.php?productid=16555&cat=274&page=1) available.


http://www.atozfabrication.com/store/image.php?type=P&id=16555

Just thought I'd throw up a picture of some of your stuff. I used the mounting plate for the front bumper and your aluminum fairlead. It made the build super easy. Thanks!

http://i165.photobucket.com/albums/u42/rkik/Hidden%20Falls%207-18-2009/IMG_6926.jpg

Thanks for the pic--looks like a fun area!

BTT and don't forget to use the PBB10 discount code on orders over $100. ;)

BTT for the holidays.

BTT for the build season!

I am wanting to build a tire carrier/cradle for my rig. Its a suzuki samurai with full exo cage. Wondering if your carrier kit would work with a zuk with toyota axles or are your parts specifically for jeeps only.

I am wanting to build a tire carrier/cradle for my rig. Its a suzuki samurai with full exo cage. Wondering if your carrier kit would work with a zuk with toyota axles or are your parts specifically for jeeps only.

Nope, not brand-specific. We have seen our stuff on everything from full-size rigs to industrial applications. Only your imagination can limit what parts can do. Just make sure to shoot me some pics of the projects you build with the parts ot help others down the road.
:cool:

Yummy machined parts are ready for your build!

do you make a trail cage kit for a yj?

quote for 4 clevis mounts (400-CLVMNT) shipped to 95003
thanks

Fresh batches of parts coming off the CNC mill every day.

Diy ftw.

New H1 rings coming shortly.

Order up for Build Season!

Do you have any more pictures of the front bumper mount?

Btt.

Have fun fabbing this year!

Btt.

What are you building??

Thanks for the orders, PBB Members. Don't forget PBB10 on $100+ orders!

You guys and gals are running us out of steel quicker and quicker!

We have the Mazak running full-bore today to get a new batch done. Order now for fresh units.

BTT for the holiday weekend! Happy Labor Day!

Bump for the weekend.

Have you seen our selection of DIY parts for tube fabrication??
http://www.atozfabrication.com/store/Tube-Fabrication/

http://www.atozfabrication.com/store/images/D/DSC_0573.JPG

Btt!

Ho ho ho!