PDA

: Random pics of my junk

JoshC
04-15-2002, 07:51 PM
Junk...
JoshC
04-15-2002, 07:52 PM
clearence 1
JoshC
04-15-2002, 07:53 PM
clearence 2
JoshC
04-15-2002, 07:55 PM
and my pipes were acting as bump stops.... so I moved them.
jdjanda
04-15-2002, 08:19 PM
You sick fawker :flipoff2:

I know you'll leave the holes and not worry about fabbing a panel to close'n em off.






Edit for Scout Dude :rolleyes:
Scout Dude
04-15-2002, 09:06 PM
Originally posted by jdjanda
You sick fawker :flipoff2:

I know your leave the holes there and not worry about close'n em off.

WTF did he say?:confused:
JoshC
04-15-2002, 09:16 PM
Originally posted by Scout Dude


WTF did he say?:confused:

something about wanting a goat hole :barf:
Cliffy [JD]
04-16-2002, 06:54 AM
Did you move your axle back?? Just wondering since the hole is only towards the rear of the wheel tub.
tsm1mt
04-16-2002, 09:15 AM
Originally posted by JoshC
clearence 1

Looks like you cut right back to the edge of the stock stiffener. That's about what I originally had in mind, too. How many inches is that?

I cut into my bed on the passenger side, purely by accident, the first time I was trying to clearance for the tires.. Oops. :)
JoshC
04-16-2002, 11:06 AM
Originally posted by Cliffhanger
Did you move your axle back?? Just wondering since the hole is only towards the rear of the wheel tub.

No. I have extended shackles in the back. And shackles in the back mean that the springs, which the axle is attached to, move backwards under compression.

That's where I was rubbing. In the back. I removed my pipes so I may need to cut more out of the wells. I have not been able to test.
JoshC
04-16-2002, 11:09 AM
Originally posted by tsm1mt


Looks like you cut right back to the edge of the stock stiffener. That's about what I originally had in mind, too. How many inches is that?

I cut into my bed on the passenger side, purely by accident, the first time I was trying to clearance for the tires.. Oops. :)

4" or so. I'm actually hoping I need to cut more out. It was very theraputical. :rasta: And that would mean that I am stuffing that 38 way more than I thought I could!
JoshC
04-22-2002, 07:55 AM
UPDATE:

I have a little dirt mound near my house where I flex up to test mods. I had to remove the exhaust and trim the inner fender wells because I was rubbing. (See pics above)

I pulled backwards and ramped my rear wheel to the TOP w/o rubbing. Now I need a bigger hill!
Cliffy [JD]
04-22-2002, 08:02 AM
Originally posted by JoshC
UPDATE:

I have a little dirt mound near my house where I flex up to test mods. I had to remove the exhaust and trim the inner fender wells because I was rubbing. (See pics above)

I pulled backwards and ramped my rear wheel to the TOP w/o rubbing. Now I need a bigger hill!

SWEET