No more calls tonite, I'm beat and time for a little nap:eek:







BTW, thanks for all the business keeping me on the phone all day, its just part of the business!:smokin:

There will be fireworks! What man dosen't like playing with fire?

Everyone be safe this weekend.......but remember to have a good time too:smokin:

And lots of people have pointed out to me that some of my competitors offer multiple mounting holes.......

We looked at that 3 years ago and determined it was a complete waste of time and money. The caliper can be mounted anywhere in a 40 degree range and the bleeder will still be on top. The 14 bolt axle has a symetrical 4 bolt pattern so if you want changes you can use the left on the right and the right on the left. We make these to fit the stock spring placement so you can remove the caliper pins without removing the leaf spring (Kind of a major thing) and if you use blocks it is entirely beneath the spring.

So, in summary, we have looked at the bracket from every angle and there is no match. We review all of our designs every 6 months to make sure we don't have a new idea to add or something to change.

That is why we sell so many of these, no other reason. Well maybe the price has a little to do with it Spacers cost alot of money to make well and bends are cheap when you do more than a few at a time.

Anything new on the D60? I need these! :D

EDIT: I didn't really mean front - that wouldn't make any sense.

Anything new on the D60? I need these! :D

EDIT: I didn't really mean front - that wouldn't make any sense.


But if you need them today we can set you up with the weld on brackets.....

And the best way to do it! Buy the parts locally for less and just get the brackets and the conversion can be way cheap......

Dan,
I saw the dual caliper mount pic on your page under the caliper mount section, but no info. PM me if these are available for a 14 bolt.

Dan,
I saw the dual caliper mount pic on your page under the caliper mount section, but no info. PM me if these are available for a 14 bolt.

We get the rest worked out they aren't worth much.....You would never want to run 2 calipers on the rear for the standard brake system.

I am constantly asked to do more so here we go!

Watch for them......:smokin:

With 4400+ of these in use they don't need much advertising, they are sold mostly word of mouth!

i just orderd my 14 bolt disc brackets from your site.

Inroute!

The reality is that a Disc Swap is cheaper than rebuilding drums!

Way lighter too!

Its usually cheaper to swap than rebuild drums.....!

got these on my ride and Dan is great to deal with

I just installed the 14b rear caliper brakets and they fit perfect. Bent real nice and very heavy duty. Used '76 Caddy calipers w/e-brake. Had to open up the gap a fraction so the calipers would slide down in but otherwise no problems.

JR

We have sold so many of these its' just getting silly! Why have we sold so many? Here are a couple of reasons, They Work, and you can call us anytime to order them or order them online. We are available when you want us to be, not when we want to be!:smokin:

OK Dan, heres another application. 3/4 ton brakes in place of the 1 ton brakes on the front D60 in order to clear 15" rims. Do you make them?

OK Dan, heres another application. 3/4 ton brakes in place of the 1 ton brakes on the front D60 in order to clear 15" rims. Do you make them?

We don't yet but we may have to at this rate......

from the "dominant force in the rock crawling world", I read that somewhere!:shaking: and NO, we do not claim to be the dominant force, I could never be so vain.......:smokin: But someone seems to think they are taking over and they have a thing or 2 to learn first!


BTW, Brake brackets need to be tilted so you can bleed them.....there is also another reason we make them this way but I think I will save that reason for the dominant guy!

And make it easy on your pocket too!

Where they belong!

He asked me why I didn't position our brackets so that the caliper was on top???

I asked myself why would this guy ask such a silly question, I answered it and he said he was glad he called......

Now to find the answer all you have to do is look at a 14 bolt axle......They need to be the way we made them!

#1 answer is if you are running your 14 bolt with leaf springs you would have to drop the axle from the springs to remove the caliper, the pins will hit the springs if the caliper is running flat on top:D

#2 answer is how do you bleed your brakes if the caliper is flat? You can't buy them pre blead can you? You need 1 side of the caliper to be higher than the other, it dosen't really matter which cause you could always run the left on the right......:shaking:

Yes, we first made these bent nearly 3 years ago, not yesterday, we know the way they work:p

9 more of you agreed so far this weekend, they will ship in the morning!

just ordered disk brack bracket for 14 bolt FF srw- would you recommend an adjustable proportioning valve if the vehicle will be drove on the street?

thanks

just ordered disk brack bracket for 14 bolt FF srw- would you recommend an adjustable proportioning valve if the vehicle will be drove on the street?

thanks

The increase in braking power should be governed so they can be properly adjusted, it is equally important offroad when you think of some of the decents we have ourselves do. You don't want the rear brakes locking up first...!

But I believe we just sold the 5000th set! We have been making these bent for 2 1/2 years now and several companies have followed us into the land of the Bent Bracket, all work great! Thank you for the support.....:D

Back to brake bracket land..... :D

I love to have some inventory to sit on, I hate to keep people waiting....

Does the 45$ include shipping.

hey man do you got a discount on leaf spring mounts for pirate?

Ray

Does the 45$ include shipping.

The $45 is for the brackets, they are $6 to ship....We aren't bargain basement, we are high quality at a fair price and we have always had this price, a couple of others lowered their high prices over the last year to compete with us but this has ALWAYS been our price.....

hey man do you got a discount on leaf spring mounts for pirate?

Ray

Use the PBB10 discount code when you checkout and you get a 10% discount on anything we sell.....Plug it in when you check out.....

just got mine in the mail today.

thanks for the quick shipping

justin in snowflake

just got mine in the mail today.

thanks for the quick shipping

justin in snowflake


We try to make that normal shipping.....:D:D

I need a set of these for a Dodge d70. :smokin:

Have not seen the D44 front brackets on the website and the talk about them faded about a year ago, from looking back at this thread.

Any plans to go forward or are they a product? I want to replace the crappy OEM ones that do not match on my front.

Thanks.

Have not seen the D44 front brackets on the website and the talk about them faded about a year ago, from looking back at this thread.

Any plans to go forward or are they a product? I want to replace the crappy OEM ones that do not match on my front.

Thanks.


i would like to see front brackets for a ford60 to a gm caliper

Right now......

However, since you can still get them relatively easily they haven't been a priority and the last year has been a blur......

We are expanding dramitically though and now have 1 person working full time on development so I don't have to do everything myself in the middle of the night.....I also have 2 employees besides myself that are very good in CAD so we can speed up the bringing of new products to market.....

I will not say when we may have these but they are being worked on between many other things.....

On the D60, I believe no matter which vehicle the brackets go on the GM calipers are the way to go, I can't stand the Ford wedges and the GM calipers are way cheaper too.....

I have always believed in doing things the simplest way is usually the best way, bends are simple and easy but best of all they work!

Everyones doing it!

And learning from thier misstakes I see.....:D

And will always!

I have recently seen many companies drop off the map as they struggle with the economy and ways to cope......My answer is to control growth, runaway growth is almost worse than low growth, way too hard to control prices and maintain delivery times.....

We are working on many new items that will be available at the kind of pace that can be maintained without developing debt of any kind, in a recession debt is what kills businesses. Watch for the new items weekly......

He asked me why I didn't position our brackets so that the caliper was on top???

I asked myself why would this guy ask such a silly question, I answered it and he said he was glad he called......

Now to find the answer all you have to do is look at a 14 bolt axle......They need to be the way we made them!

#1 answer is if you are running your 14 bolt with leaf springs you would have to drop the axle from the springs to remove the caliper, the pins will hit the springs if the caliper is running flat on top:D

#2 answer is how do you bleed your brakes if the caliper is flat? You can't buy them pre blead can you? You need 1 side of the caliper to be higher than the other, it dosen't really matter which cause you could always run the left on the right......:shaking:

Yes, we first made these bent nearly 3 years ago, not yesterday, we know the way they work:p



And changed his after only making them for 2 weeks......I guess I should have not said anything but I didn't want to see anyone get a product from someone that dosen't understand R&D that didn't work......would have taught him a lesson though.....Yes I knew who it was, I may be old but I'm not slow.....

As I have said before YOU THE MAN,DAN. All the stuff that I have got from you has been first class.Somebody else's stuff mite be cheaper.But like old pappy said ( Son,you get what you pay for around here) CHEAPER AINT BETTER!!!:D

Its always good to hear we are doing something right....:p

The cheapest isn't always the best, usually not even close. However for a long time we were the least expensive, our competitors might have just been greedy:eek: I think they only lowered their prices to pick up the scraps.....:p

Where these belong!

It seems the yellow star venders that renewed in October have lost the ability to respond to PM's so if you are trying to get ahold of us call us.....

Thanks Lance & Steveh!

But the first to make Brake Brackets like the factory does, Bent!

Dan I didnt read all the way through this so if its been sugested before Im sorry. Have you thought of adding a place to mount one of the small cable activated emergany brakes or combination calipers that wilwood makes. Part nubers are 120-9650 this is a caliper like the cady one that does both the ebrake and stops you and 120-2280 wich is just a little cable activated caliper used for things like drive line brakes. the 2nd one is only $100 for 2 if you had a bracket that could use those with GM standered calipers it would be way cheeper then using the cady calipers with e-brake for us guys that need one.

At that Wilwood caliper.....

That caliper only works with their $140 bracket and the calipers are $120 each also.....:(

summit racing sells the small one for $59 each. The combination one I think if you can get your hands on one you could do it with out there bracket.

summit racing sells the small one for $59 each. The combination one I think if you can get your hands on one you could do it with out there bracket.

And see what we could do with it.....

if you can make it work that would be awsome it would do away with the big $$$ cady calipers.

if you can make it work that would be awsome it would do away with the big $$$ cady calipers.

The Cadilac Calipers are way too many dollars.....

Looks like most of the country will have reasonable weather so get out there!

Remember that we do answer the phone 6 days a week, 8 to 8.....!:D

those are sprint car calipers, light duty use, less than an inch rotor thickness

Got a pair comming.....

13 pair in 1 day is a record! I guess you liked the markets recovery today too, I hope its not temporary.....:D

These are one of our mainstay products....:D

Was just gonna hop on here and ask if you are still working on an e-brake option. And it looks like your still trying thanks for all the extra effort :smokin: I hope something works out soon

Also gonna ask a stupid easy question but I want to have them when I go to the garage. What size are the bolts that hold the brackets on the 14b? I misplaced mine, and didn't see a sive listed in the bible.

Your prices must be normal prices which are lower than most company’s sale prices, and as always, everything, made in the US. You must be supporting American business. Am I right?
__________________________________________________ ____________________
mike

Phase One (http://www.digitaltransitions.com) Car Transport (http://www.nationaltransportllc.com)

Was just gonna hop on here and ask if you are still working on an e-brake option. And it looks like your still trying thanks for all the extra effort :smokin: I hope something works out soon

Also gonna ask a stupid easy question but I want to have them when I go to the garage. What size are the bolts that hold the brackets on the 14b? I misplaced mine, and didn't see a sive listed in the bible.

They are 1/2" automotive fine thread.....

[QUOTE=mike2008;8868016]Your prices must be normal prices which are lower than most company’s sale prices, and as always, everything, made in the US. You must be supporting American business. Am I right?

__________________________________________________ ___________________
mike

We only make products in the US, making them offshore would cost Americans jobs.....I don't do that!

on the Dana 44 front brackets? I have a set of the 14 bolt brackets and they are a great product. Keep up the good work.

4 new products today......here comes the avalanche of new stuff!

I hope everyone had a great weekend.....:D

These continue to be our bestselling item!

If you tried to place an order between 11pm and 8am this morning our shipping was screwed up! Fixed now but try again. I tried to get our Canadian shipping to charge correctly (it has always undercharged) and I blew it! Thats what happens when I start to think I know how to use a computer:homer:

What do you call it when a company lowers their prices?

Pricing scare tactics! Some people don't read what they write.....:shaking:

Festivus is coming up quick!

We are raising the numbers of how many we keep in stock as the holidays come up so we don't have to keep anyone waiting!

13 pair today and this weekend and nobody bought more than 1 pair!

And thankyou Pirate!

Are fit for your rig!

We keep plenty in stock so when you want them we have them, but if you are planning the upgrade this winter think ahead!

By the volume of people using this axle.......

16 pair Friday afternoon through so far today!

Maybe tommorrow!

BTW, hardware always included! Sorry you have so much time on your hands little ricky.....Little ricky is my shadow, he follows me around.....

We all here appreciate the business, keep it up!

Time to think about something else......Like stopping power!

Any news on making the Wilwood e-brake caliper work??

Any news on making the Wilwood e-brake caliper work??


It uses an 0.81 thick caliper which is just out of the realm for heating up......no dice, it would have been too easy.....

But we do have 12 other options ready to go!

We have never been that busy on a weekend before!

What holiday? My boss is a slave driver.....:p





BTW, I can say that since I am also a vet......Its been 30 years but it damm well counts!

Ready to stop?

Well, to put it simply it costs' less to replace the drums with disc's than it costs to rebuild the drums.....:D

Around $200 complete if your existing brakelines are in reasonable condition.....

Not really sure who did?

HOWEVER, we were the first to actually improve on the design by bending them and we definately were the guys that made them affordable! Our price has always been $50, from day 1, we didn't have to lower our prices to be able to sell them. Most companies still sell these for $75 - 100 a pair but a few others are now bending them, it only makes sense.

BTW, the whole reason we give a dscount for Pirate readers is so we can measure where our sales are coming from, we don't only advertise here, we advertise on 42 different sites and I need to know which to spend time on.

Not really sure who did?

HOWEVER, we were the first to actually improve on the design by bending them and we definately were the guys that made them affordable! Our price has always been $50, from day 1, we didn't have to lower our prices to be able to sell them. Most companies still sell these for $75 - 100 a pair but a few others are now bending them, it only makes sense.

BTW, the whole reason we give a dscount for Pirate readers is so we can measure where our sales are coming from, we don't only advertise here, we advertise on 42 different sites and I need to know which to spend time on.


Ole partime little ricky might still be asking $65......Competition is good for you!

Do you have anything for the D70?

Do you have anything for the D70?

Give me a call.....

And that other holiday too!

Has it already started?

For making these the most popular made! I don't think anyone else has sold over 5000 pair in the last 3 years.....

Do it with Ruffstuff and do it yourself!

On your list!

And these will make it right! Engineers agree bends are better! Now you ricky!

Or I suppose you could just cut up some angle iron and call it good:D

Hi Dan, its John Leonti, I am going to place a order today just for a heads up...Thanks John

You should see them tommorrow.....:smokin:

Damn you guys are quick. Ordered on Saturday and showed up today already. Nice solid product. You rock!

Tom

Damn you guys are quick. Ordered on Saturday and showed up today already. Nice solid product. You rock!

Tom

Its hard to do this time of year....I am still working and the second shift is preparing for tommorrows orders now.....lots of prep to keep up with....

Time to check in.....

Dan, I am 100% on my order thanks.............John

By the way, your parts ROCK.........................:D


I would like to make my build with all the parts you make, I would love to see you guys fab up some more stuff, because, You got what it takes ....:smokin:

Dan, I am 100% on my order thanks.............John

By the way, your parts ROCK.........................:D


I would like to make my build with all the parts you make, I would love to see you guys fab up some more stuff, because, You got what it takes ....:smokin:

We are in the midst of the biggest changes we have ever done right now! We are adding the desert racing crowd kind of parts and I have to say their style is influencing my new designs. Rockcrawlers usually weigh quite a bit more but they hit rocks at 50mph, kind of hard to say which needs to be stronger?

that I can be sure of........

yes we are answering the phone on Saturdays, we always have! Until Christmas we are answering the phone 8-8 7 days a week!

We are trying to make ourselves available to you when you can call....7 days a week, 8-8 everyday!

is there any way to run calipers with e-brakes with this bracket?

is there any way to run calipers with e-brakes with this bracket?

From a '76-77 works with these.....

back to the factory! Staying real busy, Thanks Pirate!

I personally don't have the time to update my posts every 20 minutes, we are very busy, maybe late at night but 10 times during the day?

We are at it early again, been here printing orders since 5:15, time for a break!

5 or 6 pair a day on these! Don't worry, we just got another 300 pair done, plenty to go around!

Ever since we started bending them, thats 2 1/2 years!

Now get back to work!:D

placing an order today!

just went to order them but didnt know how to get the discount do i need to call?

just went to order them but didnt know how to get the discount do i need to call?

Plug in PBB10 in the discount code box when you checkout!

ok awsome thanks a lot order sent any idea on arival to mass?

ok awsome thanks a lot order sent any idea on arival to mass?


But there seems to be a direct link between Sac and Boston so if you live near Boston you may get it sooner, we have had overnite deliveries to locations close to Boston.....At the standard price.

wow awsome thats fast im about 40 minutes north of boston so hopefully for the weekend thanks again

I was suprised when it was first reported to me too but if you are near to an East Coast postal hub, Boston, NY, DC, Charlotte, or Miami everything seems to be delivered a day or 2 faster. Sacramento is also a "Postal Hub" so they overnite everything between hubs.

Get'em for his old suburban and help him put'em on, great way to score points!

ordered the 14 bolt brake caliper brackets. can't wait to install them

ordered the 14 bolt brake caliper brackets. can't wait to install them


You should have them Tuesday.....:D

Today is the last day to order to get them by Christmas without paying extra for fast shipping! Order must be in soon!

Today is the last day to order and still get these before Christmas.....!

If you have the time off around the holidays! get to it....:D

You should have them Tuesday.....:D

got them today just as you said. very impressive looking, thanks for the kick ass deal and quick as hell shipping

This Holiday season you guys really pressed us, I had 3-5 guys working just packing boxes most of the day, 1 guy just welding all day and 1 guy working with me on new designs.......I will sleep easy tonite and maybe I won't get a lump of coal in my stocking tommorrow!

You know with the weather being so cold, a lump of coal might not be the worst gift:flipoff2:

Merry Christmas Dan.

C.

I don't know why but my Girfriend only gave me gratuitous sex, so she got an extra gift!:D

Now get back to work on that rig!

More to come!

Because they are easy!

5 more to go!

Now we just have to make them! It takes about 1 full day to design new brackets and my new guy is doing 1 a day!

For the number 1 brake bracket made!

Do you have anything to mount my factory front calipers (06 2500 HD Chevy) on a Ford D60 using the chevy outers? I am using the chevy parts so they can be machined to keep my abs tone ring and sensor.

What ever happened with your front D44 brackets? I couldn't read all 26 pages..... :D

Do you have anything to mount my factory front calipers (06 2500 HD Chevy) on a Ford D60 using the chevy outers? I am using the chevy parts so they can be machined to keep my abs tone ring and sensor.

We do not yet make one for the late model large caliper, the cost of the caliper alone has kept me away from those but i will look into it. Keeping ABS on a street truck makes great sense.

What ever happened with your front D44 brackets? I couldn't read all 26 pages..... :D

We stopped development on the D44 front for a period of time due to the great many internal hub stud patterns coming from the different manufacturers, however I hired one person to work solely on design with me and today we finished 2 new bolt on brake brackets, the Ford Sterling and the Ford 9". The 9" may require a couple of prototypes before it is perfect but the Sterling will be available late next week.

The D44 and AMC20 rear axles are on the plate tommorrow. And some people want to know why we have over 40 axles next door:D

Top of the heap!

With all the different parts we make it wouldn't make sense to rely on a friend having the axle or truck we need so we can test something. Thats why we have so many axles and vehicles here.....There is always something to make, or maybe make better that the other guy!

I don't think any bracket we could make will ever catch up to the sheer quantiity of these we've sold! Who knows? Maybe? These are the number one seller because we make'em the right way and we make'em for a fair price!

Always the right choice!

Good thing I am not a post whore!

A post whore, but at least I take the time to say something more than TTT!:D

Bolt-on brackets for a '79 Ford D60FF yet?

Bolt-on brackets for a '79 Ford D60FF yet?

We should have the first produstion run done in about 10 days! We are also running the Ford Sterling brackets, the Big bearing Ford 9", and 3 for Toys!

Simplicity from the start!

to the end! There is simply no reason a Disc brake swap needs to be expensive or difficult....

Using 14 bolt axles amazes me! These are still #1 among all of our sales!

ready Friday!

Lots of new competitors in the brake bracket biz but they just don't compare! And still the kit guys charging hundreds of dollars for stuff you can get at the local autozone for $100.....Remember, free shipping for rotors and calipers isn't really free!

4 More already in production! They are the Ford Sterling & 9", the D60 GM rear, and the D60 Ford rear.


Here are some of the others we are working on....

D20/AMC20
Chrysler 8.25
Dodge 9.25
D44 Scout
D44 Jeep


And yes, we will do some front brackets, I know they are getting hard to get from the yards.....leaving them on the axle makes them worth more to the yards.....

But......What do YOU want us to make?

I have a 14B C&C axle. I plan on shaving it and doing the disk brake conversion. My question is, what size (dia.) rims do i need to get to clear the calipers? You have listed using '75 Chevy 3/4 ton front rotors and calipers for this application I belive. Most factory set-ups were 16.5" truck rims for that year. Can I use 16" or must I go 16.5" or 17" rim? I only ask because it limits tire selection.

Thanks!

I have a 14B C&C axle. I plan on shaving it and doing the disk brake conversion. My question is, what size (dia.) rims do i need to get to clear the calipers? You have listed using '75 Chevy 3/4 ton front rotors and calipers for this application I belive. Most factory set-ups were 16.5" truck rims for that year. Can I use 16" or must I go 16.5" or 17" rim? I only ask because it limits tire selection.

Thanks!


You can go 16 but stay away from the really large offset, 3.75 is good. Many 15" rims will work but when you buy the rims bring the rotor and you can check, all the rims have the same outside dimensions but the insides differ alot from manufacturer to manufacturer.....no 15" and most 16" aluminum will not fit due to the thickness.....

And the phone is ringing off the hook! Yes we are here and we do answer the phone on Saturdays!

Everyone have a great day!

These are still our number 1 seller! And for a good reason!

Right where these belong! We redesigned the Toyota early IFS bracket today, off to production!

I got mine in the other day, and have put them on.. great product, much beefier then I expected. and I even test fitted my 15i wheels... barley rub so just a little hit with grinder on the caliper and I will be mounting my axels (14 bolt) Thanks again
Josh

disc's on a 14 bolt and 15" wheels, about 60-70% fit fine, 10% with a small grind, and the rest just won't make it.....The wheel mfg'rs just don't share the same ideas when it comes to how the insides of the wheel should be shaped.....

We will see which ones make the cut!

Its just accross town from the cutter but I want them now! Sterling!

I just ordered the 3.25" disk brake brackets for my 60 rear, what rotors/calipers do I use with that?

I just ordered the 3.25" disk brake brackets for my 60 rear, what rotors/calipers do I use with that?

'73-87 Chevy 3/4 ton 4x4 front calipers & rotor.....And thanks!

'73-87 Chevy 3/4 ton 4x4 front calipers & rotor.....And thanks!I looked up a brake rotor for a 73 Chevrolet K20 Pickup and these are the vehicles that product fits, in case someone else wants to know

CHEVROLET
1971 - 1972 C30 PICKUP
1971 - 1973 P30 VAN

1975 - 1986 K20
1987 V20

1971 - 1974 K20 PICKUP
1987 - 1988 V20 SUBURBAN

1971 - 1986 K20 SUBURBAN
1989 - 1991 V2500 SUBURBAN



GMC
1971 - 1972 C35/C3500 PICKUP
1979 - 1986 K2500

1975 - 1978 K25
1971 - 1973 P35/P3500 VAN

1971 - 1974 K25/K2500 PICKUP
1987 V2500

1971 - 1986 K25/K2500 SUBURBAN
1987 - 1991 V2500 SUBURBAN



JEEP
1974 - 1986 J10
1974 - 1988 J20


and the calipers cross over to these vehicles...


CHECKER
1969 - 1970 MARATHON



CHEVROLET
1971 - 1978 BLAZER
1975 - 1978 K20

1975 - 1978 K10
1971 - 1974 K20 PICKUP

1971 - 1974 K10 PICKUP
1971 - 1978 K20 SUBURBAN

1971 - 1978 K10 SUBURBAN



GMC
1971 - 1978 JIMMY
1975 - 1978 K25

1975 - 1978 K15
1971 - 1974 K25/K2500 PICKUP

1971 - 1974 K15/K1500 PICKUP
1971 - 1978 K25/K2500 SUBURBAN

1971 - 1978 K15/K1500 SUBURBAN



JEEP
1974 - 1978 CHEROKEE
1974 - 1978 J20

1974 - 1978 J10
1974 - 1978 WAGONEER



PONTIAC
1969 - 1970 BONNEVILLE
1969 - 1970 EXECUTIVE

1969 - 1970 CATALINA

Thats why they are so inexpensive, they came on everything made for 25 years!


I looked up a brake rotor for a 73 Chevrolet K20 Pickup and these are the vehicles that product fits, in case someone else wants to know

CHEVROLET
1971 - 1972 C30 PICKUP
1971 - 1973 P30 VAN

1975 - 1986 K20
1987 V20

1971 - 1974 K20 PICKUP
1987 - 1988 V20 SUBURBAN

1971 - 1986 K20 SUBURBAN
1989 - 1991 V2500 SUBURBAN



GMC
1971 - 1972 C35/C3500 PICKUP
1979 - 1986 K2500

1975 - 1978 K25
1971 - 1973 P35/P3500 VAN

1971 - 1974 K25/K2500 PICKUP
1987 V2500

1971 - 1986 K25/K2500 SUBURBAN
1987 - 1991 V2500 SUBURBAN



JEEP
1974 - 1986 J10
1974 - 1988 J20


and the calipers cross over to these vehicles...


CHECKER
1969 - 1970 MARATHON



CHEVROLET
1971 - 1978 BLAZER
1975 - 1978 K20

1975 - 1978 K10
1971 - 1974 K20 PICKUP

1971 - 1974 K10 PICKUP
1971 - 1978 K20 SUBURBAN

1971 - 1978 K10 SUBURBAN



GMC
1971 - 1978 JIMMY
1975 - 1978 K25

1975 - 1978 K15
1971 - 1974 K25/K2500 PICKUP

1971 - 1974 K15/K1500 PICKUP
1971 - 1978 K25/K2500 SUBURBAN

1971 - 1978 K15/K1500 SUBURBAN



JEEP
1974 - 1978 CHEROKEE
1974 - 1978 J20

1974 - 1978 J10
1974 - 1978 WAGONEER



PONTIAC
1969 - 1970 BONNEVILLE
1969 - 1970 EXECUTIVE

1969 - 1970 CATALINA

Thats why they are so inexpensive, they came on everything made for 25 years!I was planning on getting the parts from the junkyard until I found out the calipers are only $20 from the parts store :D

I can't wait to get my parts. One good thing ordering from you is, it's a sure thing that you will get your parts. I've placed several orders with you in the past few weeks and, without delay, my parts arrive :beer:

Just to clarify the bolt-on brackets for a '79 Ford D60 full float are done correct?

If so, how much are they shipped to 80122 and how do I go about ordering them? I don't see them on your website.

Thanks.

Just to clarify the bolt-on brackets for a '79 Ford D60 full float are done correct?

If so, how much are they shipped to 80122 and how do I go about ordering them? I don't see them on your website.

Thanks.

They will be tapped Monday and added to the website monday night, they will be $50 a pair...

I was planning on getting the parts from the junkyard until I found out the calipers are only $20 from the parts store :D

I can't wait to get my parts. One good thing ordering from you is, it's a sure thing that you will get your parts. I've placed several orders with you in the past few weeks and, without delay, my parts arrive :beer:

Between us and the majority of the 4x4 companies out there.....

The primary difference is that we keep things in stock, we don't make it after its ordered. Seems like common sense to me but in the 4x4 marketplace it just isn't.

The second thing, and maybe the most important in this economy is we don't owe anyone a penny. If you carry a balance with someone it is pretty easy to get behind when order flow slows. I simply pay as I go. That may be why I drive a 2000 Ranger everyday and not some $60K truck to show how cool I am but I DO have $500K in inventory on the shelves!

We will release the Ford Sterling this evening! $50 a pair, just like the rest....

Its a good start!

50 pair left and 200 more coming in today! We got you covered!

As usual, the weekends leader but the heim joints are catching up fast!

http://www.pirate4x4.com/forum/showthread.php?p=9437318#post9437318

almost 90 pair in the last 7 days! Thank you all:D

It seems the search engines do most of the work for me on these, always the number #1 answer! And as always our #1 seller too but we have added 2 more brackets this month also!

well, its a toss up, all 3 are in production! The GM 12 bolt, the Ford 9", and the Dodge D60HD......Hopefully all within the week!

Dibs on the first pair of 12 bolt Caliper Brackets. PLEASE PM ME when you are ready to ship. Ripped one side off at Predator in Az yesterday.

Way back for the number 1 selling Disc Brake Bracket!

And we finished the 12 bolt GM bracket, adding it to the website tonite! Pics tommorrow....:D

how much for a ford d60 set and do you have them for a ford d44 front?..shipped to 30337

how much for a ford d60 set and do you have them for a ford d44 front?..shipped to 30337

But we do not yet do any fronts....

grrrrrr...Ok...how bout for just the rear d60...30337..

grrrrrr...Ok...how bout for just the rear d60...30337..


They are $51 shipped after the PBB10 discount......

Of course we bend them.....Why wouldn't you?

very interested to see a set for early big bearing 9" that doesnt use spacers.

Not for sale til they're ready though!

Monday or Tuesday we should be releasing the late ('78-94) Ford D60 brackets and the GM 12 bolt brackets....!

Watch for them!

Thanks Dan for the 14 bolt disc brackets and Dana 60 diff cover. My little girl had fun checking out all the cool "metal stuff" in the shop.....:D

Thanks Dan for the 14 bolt disc brackets and Dana 60 diff cover. My little girl had fun checking out all the cool "metal stuff" in the shop.....:D

Even if she is 5 years old! I think I have the guys here trained to keep the noise down when someone brings in a little one but I hope it was ok giving her a shock tab, she seemed to like it!

Even if she is 5 years old! I think I have the guys here trained to keep the noise down when someone brings in a little one but I hope it was ok giving her a shock tab, she seemed to like it!


She loved the shock tab....in fact she slept with in when she took a nap on the ride home...lol

Again...thanks and the brackets worked perfectly!

Hey dan just ordered another set of your 14bolt brackets. Will be lookin for them this week..... Keep up the awesome work......

She loved the shock tab....in fact she slept with in when she took a nap on the ride home...lol

Again...thanks and the brackets worked perfectly!

She will want to take it to show and tell!

Hey dan just ordered another set of your 14bolt brackets. Will be lookin for them this week..... Keep up the awesome work......

And thanks for the repeat business....:D

We have been very busy around here and I am definately ready for a nap! Thanks for a great day Pirate!

Any progress on the D44?

Any progress on the D44?

Call me and let me know which you are interested in.....

hey dan just ordered another set of your 14bolt brackets. Will be lookin for them this week..... Keep up the awesome work......

hey dan, got the brake brackets a couple of days ago and looks great. Thanks for an awesome product and super fast shipping.

Fast and high quality is always our goal!

This has been another record month and 3 days left!

Need to two sets for a 14 bolt shipped to 43793.

Thanks

Need to two sets for a 14 bolt shipped to 43793.

Thanks

$100 total delivered with the discount, order them on our website and plug in the discount code (PBB10)....

thx

We appreciate it!

In stock tommorrow! These continue to be our best seller, and for a good reason!

5 pair of these a day! I am amazed of just how many 14 bolt axles are in use on wheelers....!

I am ready for some warm weather already...:(

Yet....


We have just released the 12 bolt GM bracket and have the Dodge 9.25 in production, should release it within a week! Thanks for making it possible for me to have 1 guy working on just brakes and Diff covers!

And still working, only a couple of hours left.....:D

Everyone I talk to seems to have had a great holiday and the weather is getting nicer so life is good!!

but at least business is good! Thanks for all the orders Pirate:D

And I still have a voice! Its' been nice having Garett on the phone also...Nice for you and a big relief for me:D

But remember that we also answer the phone on Saturdays from 8am - 7pm!

We were very busy Saturday on the phones, its just another thing that sets us apart from the rest. We are ready to help you when YOU need it, we don't work bankers hours here, 8am til 7pm 6 days a week!

How about a kit for a large bearing Ford 9 ?

How about a kit for a large bearing Ford 9 ?


Should be done within 2 weeks, watch for it!

The '77-'85 Ford D60 Rear Disc bracket, still only $50 a pair!

Thanks Pirate!

How do we order/pay you? I'd like to get some soon(14b disc brackets). Thanks

How do we order/pay you? I'd like to get some soon(14b disc brackets). Thanks

While you are there check out the rest we have to offer! We have over 200 pair in stock....

These are still our Number 1 part sold, every since we introduced the bent brake brackets 3 1/2 years ago these have led all of our sales!

Time to make another batch, only 100 pair left!

The ones you want!

3 pages in a day, everyone is building!

Actually it seems nobody wants anything else!:D

I'm working early today so time to get to printing labels for this evenings packers(they come in at 5pm). Thanks for keeping these at the top of our all time biggest sellers list!

You gotta know they are from us to buy them!

4 pair out today!

What better way than with a better braking system!

About the rotors?

These use the rotors from a '75 Chevy 3/4 ton 4x4 Front Axle....

Still only $6 to ship.....:D

5 or 6 pair a day, our best selling item of all time! Thanks

We like being this busy!

still pumped to see what yall come up with for the BB 9"

still pumped to see what yall come up with for the BB 9"


We are now working on 8 different new brackets, beyond the 4 new over the last 3 months...

I'm sorry if it seems like we take a long time to come out with new brake brackets but your butt is riding on our brakes so we want them done right!

Just look at how many companies only make 1 brake bracket.....They are not going to any effort to make what you need, we do!

I can see us making 30 different brackets over time....:D

After 3.5 years these are still our best selling product! thanks Pirate!

I was swamped on the phone with orders! We did get 36 orders out today before the early cutoff (for a Saturday) for those of you that called! I'm sorry but 13 were too late for the cutoff and will have to go out Tuesday:(

Neen a pair of 14bolt sent out to 80121. Without scaning 30 pages....do you do next day or overnight shiping.....Thanks Harold