Neen a pair of 14bolt sent out to 80121. Without scaning 30 pages....do you do next day or overnight shiping.....Thanks Harold

But normal Colorado shipping is 2 days anyway......It would cost $30 more for faster.

Thanks Dan! received my 14 bolt C&C brake brackets and pinion guard, everything looks excellent and shiping was fast. Thanks Again, Jeff

We do try our best...:D

I haven't updated this in 2 weeks and we still sold 65 pair! I guess they are the wanted ones!

Thats right, we sell more of these than anything else! And for good reason:smokin:

14 pair out this morning! And I thought you guys played on weekends!

Another 7 pair so far today!

Always keeping us hopping!

Just ordered some 14 bolt brackets. Of all the companies I've seen yours has some of the best innovations! The bent bracket is way better. No discount but that's OK. The brackets still look fantastic!!!:homer:

Just ordered some 14 bolt brackets. Of all the companies I've seen yours has some of the best innovations! The bent bracket is way better. No discount but that's OK. The brackets still look fantastic!!!:homer:

To get the discount you need to plug in PBB10, call me and I will refund the amount.....

And still 56 pair sold without a bump! I don't think we really have to advertise these anymore!

Are the reason we need to move to a larger space, if you have to move to a bigger space in this economy somethings going right!

It matters!

All the rest aspire to be!

progress on 9"?

I'd love to see a big bearing Ford 9" bracket. I'll buy the first.

progress on 9"?

I'd love to see a big bearing Ford 9" bracket. I'll buy the first.

2 1/2 times larger!

I have another designer beginning next week to help take much of the load off Garett and I so new things should move faster. We are also hiring 2 more welders because of the increasing demand every week and all the new items that require welding....I hope that gives you an idea of where we are at!

2 1/2 times larger!

I have another designer beginning next week to help take much of the load off Garett and I so new things should move faster. We are also hiring 2 more welders because of the increasing demand every week and all the new items that require welding....I hope that gives you an idea of where we are at!

Please PM me when the Big Bearing 9" is finished. I will purchase one for sure.

Please PM me when the Big Bearing 9" is finished. I will purchase one for sure.

And it should not be long!

In 3 stacks 3' tall!

you could use a flat one and some angle iron scraps....:shaking:

Thanks a lot for some awesome brakes man!

Thanks a lot for some awesome brakes man!

Thank you!

For another record breaking week!

Just ordered my first set. I'm gonna order second set if the work out right.

Just ordered my first set. I'm gonna order second set if the work out right.


We got these right about 8000 pair back!

Do it right the first time!

We got these right about 8000 pair back!

Yeah I know they are the tip top.
The Question with mine is the clearance and position
of the bracket.

Leaf springs are very close. I will post up the Result.

If there is an issue with clearance I will let you know if I need more help.

Yeah I know they are the tip top.
The Question with mine is the clearance and position
of the bracket.

Leaf springs are very close. I will post up the Result.

If there is an issue with clearance I will let you know if I need more help.

The caliper pins go above and below the springs, 1 high and 1 low.....Its kind of funny, one of my competitors copied ours but changed the bolt pattern to make them different. They obviously had no 14 bolt experience. You could not remove the calipers without removing the leaf springs and you could only bleed them if you stood the truck on its nose! I won't say who but I have pictures and copies of their advertising saying how they "Improved" them!!

And its over today!

And its over today!

What all in on the Short Sale ?

What all in on the Short Sale ?

I just couldn't let my esteemed competitor go it alone :p

We continue to sell these at record numbers and we have only you to thank, well that and a makes sense design :D

Over 200 pair in stock!

Do you have a set of brackets for a 14 b dually axle with SRW hubs ?

I think we may have something for you....

On some more new stuff! Keep watching!

However, the new shop has AC throughout! Keep the orders coming!

Enough slacking off, get to work!

Just finished an even better axle housing jig! Time to go!

Stop worrying, the only way to fly!

No rest when things need welding!

Any progress on the 9" bolt on disc brackets?
Thanks

Any progress on the 9" bolt on disc brackets?
Thanks

Our move and a few big product launches has slowed us down some but soon. It will use the GM 3/4 ton caliper and the Ford Bronco rotor.....

these are still our number 1 product after 3+ years making them bent! Thanks Pirate!

bent is the best!

The first 2 calls this morning bought 3 pair....

Working on my truck this time though!

About why I haven't changed this post in 3 1/2 years?

I told him we have held this low price & not needed to change this design for all that time and we would stick to what works! No reason to change....

These have been $50 a pair since the start, we haven't raised our prices, now I do think we had a bit of pressure on the general market though. When we released these all the other guys sold theirs for $65 or more, now they have had to lower their prices to compete!

About why I haven't changed this post in 3 1/2 years?

I told him we have held this low price & not needed to change this design for all that time and we would stick to what works! No reason to change....

These have been $50 a pair since the start, we haven't raised our prices, now I do think we had a bit of pressure on the general market though. When we released these all the other guys sold theirs for $65 or more, now they have had to lower their prices to compete!

We only charge whats fair! If someone else is cheaper look very closely and find out why!

I think the summer is just about over now get back to work!

Just in time for back to school shopping!

Still our #1 product!

I am thinking this might be the time to introduce something new for a 14 bolt? I'll think about it and let you know....:p

Simply the way to do things.....Get Bent!

By Wenesday!

Don't take a nap in the shop on the couch after hours, I woke up at 3am with the door wide open, I guess I got enough sleep....:shaking:

Time to work on one of my trucks! Only which one?

are these disk brake brakets still on sale..?? im looking to buy a set and also buy your 14 bolt swap kit...

are these disk brake brakets still on sale..?? im looking to buy a set and also buy your 14 bolt swap kit...

This is our normal price, you plug in the discount code (PBB10) to get 10% off...

Still pounding these out, at least 5 pair a day!

whenever I bring this up we sell another 10 sets! Thanks again Pirate :D

By Wenesday!

is one of them the BB 9"?

is one of them the BB 9"?

me too

is one of them the BB 9"?

me too

I would need a question answered forst....

But sometime you have to stop fast! Keep us in mind :D

I just ordered some parts to put my new axles under my yj on Thursday and they arrived today. Now that's great service. Thanks Guys! I just wish I knew about the Pirate 10% discount before I ordered.

We always try for same day shipping...:D

A bump for the best :D

..

..

Yes?

are you still making the yota disc brackets i lookd on your site couldnt find them

are you still making the yota disc brackets i lookd on your site couldnt find them

They should be back on the site in a week!

Still our number 1 product, year after year :D

Their is a reason these are the best seller we have and its not the price:D

Where these belong!

the right choice :D

only the best will do :p

We have been welding all weekend, nearly time for Off Road Expo!

coming this week....Specific application for our and others axle housings....:D

Still rules!

All kinds of companies are making all kinds of unique axles (ourselves included) but the 14 bolt is still the most popular!

I tried to call what I would consider the top 20 (by size) 4x4 retailers, it's a Saturday.....


Four Wheel Parts answered....

So I guess they are open on Saturdays and we are, I don't buy much from them but its good to know where you can call when you need something.

BTW, we also ship on Saturdays to get the parts on their way to you faster :D

We are also open til 7pm 6 days a week....

But knowing these are available might be better!

Letting these fall down on the list, the results are kinda of interesting. They still sell the same! I think it has become word of mouth for just what brake bracket to buy when you need one :D

the phones are still ringing, thats why we are here til 7pm!

We have been trying to get enough extra inventory ready to display and sell at the Offroad Expo this weekend but we continue to only just keep up, even with all the increased capacity....The Expo people have been offering me less than 1/2 price to display and is still dosen't make sense so I guess we will just be there to look and see whats new! Hope to see lots of you there :D

how do I get the pirate discount on your site? I have my shopping cart all ready with some goodies I need besides these brackets. Thanks Dan!

how do I get the pirate discount on your site? I have my shopping cart all ready with some goodies I need besides these brackets. Thanks Dan!

When you get to the window at checkout that asks for the discount code plug in PBB10 and its automatic. Thanks

OK, this question has probably already been answered somewhere in the 40 plus pages of this thread but I didn't see it so... :flipoff2:

Will these brackets (and other recommended parts like rotors) work on the "second generation" (88'+)14 bolt axles? I know the TSM kits have two different models for the two types of 14 bolt axles but I'm not sure what the difference is between the two.

OK, this question has probably already been answered somewhere in the 40 plus pages of this thread but I didn't see it so... :flipoff2:

Will these brackets (and other recommended parts like rotors) work on the "second generation" (88'+)14 bolt axles? I know the TSM kits have two different models for the two types of 14 bolt axles but I'm not sure what the difference is between the two.


After '87 GM changed alot of thngs, some of them likely led to the slump they are still in....GM started buying from the lowest bidder on nearly everything and on the 14 bolt the brakes seemed to change every 6 months. In about 30% of the cases these fit. On the rest they fit with a spacer but you need larger wheels because the rotor is farther inset because on all of the newer axles the rotor will go on the outside of the hub unless you change studs and drill your hubs for the larger studs.

Calling on these this morning so here you go!

Got my parts thank you Dan!, except my caliper mounts came with 4 grade 5 and 4 grade 8 bolts? :)

Got my parts thank you Dan!, except my caliper mounts came with 4 grade 5 and 4 grade 8 bolts? :)


How the hell does that happen? I am sorry, I don't even order grade 5 anything? I will check it out before I leave....

After '87 GM changed alot of thngs, some of them likely led to the slump they are still in....GM started buying from the lowest bidder on nearly everything and on the 14 bolt the brakes seemed to change every 6 months. In about 30% of the cases these fit. On the rest they fit with a spacer but you need larger wheels because the rotor is farther inset because on all of the newer axles the rotor will go on the outside of the hub unless you change studs and drill your hubs for the larger studs.

Thanks for the info.
So lets say were talking about the other 70% that will need spacers.
Any pics of these brackets being used on a later model axle (14 bolt)showing the spacers and/or rotor being mounted on the out side of the hub?

I don't have a newer axle in the shop so I can't but I'm sure someone will see this and post up....

Will 76-78 Cadilac Eldorado calipers bolt up to your brakets, if so I may be ordering soon :D do you ship to canada?

I don't have a newer axle in the shop so I can't but I'm sure someone will see this and post up....

Cool.
I also started another thread looking for some pics. If I get anything I will post it up here as well for those considering the same set-up.:smokin:

Will 76-78 Cadilac Eldorado calipers bolt up to your brakets, if so I may be ordering soon :D do you ship to canada?

They will fit only the first 2 years ElDorado calipers, after that they switched to the small pattern....For Canadian shipping we use USPS Flat Rate shipping but the brake brackets only weigh 6lbs and the box can take 20lbs, those boxes are $24 each so its in your best interests to fill it up if you need anything else. USPS dosen't charge a brokerage fee and abides by NAFTA so no duty on US made products, unlike UPS....

Sounds good what els do you sell that I can fit in there, I need some shakles fore the fornt and rear, you got a web padge I can look thou?

Sounds good what els do you sell that I can fit in there, I need some shakles fore the fornt and rear, you got a web padge I can look thou?

In my sig line...

good stuff !
i'll will order a set soon as i start working on brakes....

good stuff !
i'll will order a set soon as i start working on brakes....

Enjoy your weekend :D

Another big batch in today....:smokin:

These are still our number One selling item, and yes there is a reason :D

I don't have a newer axle in the shop so I can't but I'm sure someone will see this and post up....

anyone :confused:

I've called a couple of local guys to bring theirs by for a pic but its not too hard to imagine....

We have sold 19 pair over the last 3 days and 2 of those days were over the weekend!

My employees thanks you!

If ordered before 3pm PST most of you would still get them by Saturday...

Another busy day in the bag! Thanks for all the business, now all i have to do is catch up on emails...:D

price for a set sent to 97420?

Set for 14b ff sent to 26501 please.

price for a set sent to 97420?

They are $51 delivered with the PB10 discount code, thanks

Dan,

I have a custom rear axle I'm building for my CJ - using Chevy D70 SRW spindles and hubs - (didn't realize that chevy SRW D70's use what looks like SRW 14B outers)

I want to install disk brake brackets - what measurements should I provide to verify the 14B brackets will work (or not work)? I know the mounting hole spacing, but how about the spindle brake mounting flange to the disk brake mouting surface on the hub?

Let me know what you think - Thanks !

Steve

Dan,

I have a custom rear axle I'm building for my CJ - using Chevy D70 SRW spindles and hubs - (didn't realize that chevy SRW D70's use what looks like SRW 14B outers)

I want to install disk brake brackets - what measurements should I provide to verify the 14B brackets will work (or not work)? I know the mounting hole spacing, but how about the spindle brake mounting flange to the disk brake mouting surface on the hub?

Let me know what you think - Thanks !

Steve

One of the things I have learned the hard way is that adapting something is much harder than it sounds. I would likely use the weld on brackets for your application to make it easy.

I'll give you a call tomorrow - I did some measuring tonight & your Ford Dana 70 brackets look like they may work. I forgot I had a chevy SRW 14B kicking around I could compare the 70 spindles to. The mounting hole pattern on the chevy 70 spindles are the same as on the 14B - the difference is the mounting surface for the backing plate is .75" closer to the hub (more outboard)

Do you know the bolt hole pattern on the ford 70 brackets you offer? - is it the same as a 14B?

I'm definitely going to buy a set of SRW 14B brackets for the axle I have kicking around here - and a second set of something to fit the HP60/70 hybrid I'm building.

Thanks

Steve

Til 7pm....except most nights when i'm here til 10pm :p

A picture is worth a 1000 words - maybe this should be in tech, but here goes.

The SRW 14B spindle measures 7 1/4" from flange to end

http://i97.photobucket.com/albums/l224/sjsst41/14b_srw_spindle.jpg

The Chevy D70 spindle measures 6 5/8" from flange to end

http://i97.photobucket.com/albums/l224/sjsst41/chevy_dana70_spindle.jpg

The difference is 5/8"

The SRW 14B measures 4 5/8" from disk mounting surface on hub to disk bracket mounting surface

http://i97.photobucket.com/albums/l224/sjsst41/14b_srw_spindle_hub.jpg

The Chevy D70 measures 4" from disk mounting surface on hub to disk bracket mounting surface

http://i97.photobucket.com/albums/l224/sjsst41/chevy_dana70_spindle_hub.jpg

Same delta as above, 5/8"

So if the Ford D70 bracket you offer has the same square bracket mounting pattern as the 14B (~3 3/8") and the differences in the bend offset is approximately 5/8" less (than the 14B), then send me a quote for one of each shipped to 03031 :D

If you want - I can still call you to discuss. I also think I could make your standard SRW 14B bracket work - I'd just have to bolt it to the flange side facing the diff - I have to measure it, but I bet I'd get the offset I need. (thickness of the bracket + thickness of the flange, probably closer to 3/4" than 5/8")

Thanks

Steve

Just cut off the lower hole and mount on the backside....

the pair would be $101.50 with the discount delivered...the code is PBB10 if you do it before the morning...:D

Order made & Payment Sent - I'll post pics of the installed parts once I receive them.

Thanks !

Steve

Order made & Payment Sent - I'll post pics of the installed parts once I receive them.

Thanks !

Steve

You should see them Thursday or Friday...

Going to have to build up some backstock for the holidays!

Just placed an order for a HO52.

Looking forward to the swap.

Just placed an order for a HO52.

Looking forward to the swap.

They will leave in the morning!

Just placed an order for a HO52.

Looking forward to the swap.


and on that note, I am unable to find the correct bracket for my dual rear wheel HO72. It is the 3/4 and 1 ton 8 lug chevy axle used from 1947 up to and most likely past 1972. zero changes during that run. Mine is OEM to my 1955 1 ton dually and I happen to have a 1972 1 ton dually and they are identical axles.
Need disc brake bracket and REALLY prefer NOT to weld on.

Maybe I can visit for a day and bring you the truck with the axle installed? maybe send pictures?

Which disc to use?
Thanks! great products!!!
Mark in Chico

and on that note, I am unable to find the correct bracket for my dual rear wheel HO72. It is the 3/4 and 1 ton 8 lug chevy axle used from 1947 up to and most likely past 1972. zero changes during that run. Mine is OEM to my 1955 1 ton dually and I happen to have a 1972 1 ton dually and they are identical axles.
Need disc brake bracket and REALLY prefer NOT to weld on.

Maybe I can visit for a day and bring you the truck with the axle installed? maybe send pictures?

Which disc to use?
Thanks! great products!!!
Mark in Chico


I haven't yet tried that dually axle, it may be the same and it may be entirely different, give me a call and we can compare some numbers...

When you make so many different caliper brackets there is a lot of crossover and many will interchange....:D

Over 130 orders shipped today, having a holiday in the middle of the week makes the next day a serious challenge!

Your number 1 choice!

For putting us over the top on these!

The next bunch will be 400, got to have them on hand for the holidays!

These are just plain easy!

This is the first thing you want to do, saves a minimum of 100lbs!

I was beginning to wonder if all was well over there... no bump in a while! :grinpimp:

I was beginning to wonder if all was well over there... no bump in a while! :grinpimp:

We are getting extremely busy already with the holidays, we are at 7 days a week for the duration with 2 shifts welding and packing boxes....

Just installed mine this past weekend. It was a very simple and straight-forward install... The only headache was that I bought zinc coated calipers and the tolerances were too fat so I had to grind the calipers a bit to make them fit. Other than that, it was the simplest of mods and a high quality part.

Just installed mine this past weekend. It was a very simple and straight-forward install... The only headache was that I bought zinc coated calipers and the tolerances were too fat so I had to grind the calipers a bit to make them fit. Other than that, it was the simplest of mods and a high quality part.

They are made with a tight tolerance, they are not supposed to be tight but they are not meant to be loose either :D

whats the warranty on thes i have a buddy that broke one of his. it didnt turn out pretty

whats the warranty on thes i have a buddy that broke one of his. it didnt turn out pretty

Its a lifetime guarantee but there has never been a broken one that I know of, ever...And thats with over many thousands of pair in use. I think he would call if he did...I actually have never heard of any 14 bolt brackets ever breaking from any manufacturer, its a pretty bombproof design....

These might be the Christmas gift of choice!

4 years later and these are still our best selling item! Thanks

For going for the best first!

And 1st day nearly over, our holiday season has already beaten expectations!

Almost time to go back to work, damn!

got mine put on today, a little trim here and there but i like em - :smokin:


but you need some better pics on your website so here :grinpimp::grinpimp:

We have them under 5 vehicles I own and we have the worst pics....:(:shaking:

With your build! We make 16 different brake brackets....:D

Watch for the long lost Toyota files!...

From purely the business standpoint it is very worthwhile being open Saturdays!

And the countdown to KOH has begun!

The first upgrade to your new axles! Available for 18 axles!

Do your 14 bolt axle brackets fit a C&C 14 bolt axle.

Do your 14 bolt axle brackets fit a C&C 14 bolt axle.

Our Single Rear Wheel (SRW) will not but the Cab & Chassis (CNC) is made for that axle. I believe we are still the only company making them for dually axles. The offset is substantially different.

Our Single Rear Wheel (SRW) will not but the Cab & Chassis (CNC) is made for that axle. I believe we are still the only company making them for dually axles. The offset is substantially different.

How much for those shipped to 48430? Thanks!!

How much for those shipped to 48430? Thanks!!

$51 delivered....These take a big box due to the offset, the SRW's can fit in a big envelope....Remember to use the PBB10 discount code...:D

What calipers do I use to still have a parking brake? Is it cadillac rear from 77-78? What else will I need for the parking brake to work? Sorry for the 20 questions but it is going on a jeep that I am building for my girlfriend and would like for her to have a parking brake. Thanks!

Order placed!!

What calipers do I use to still have a parking brake? Is it cadillac rear from 77-78? What else will I need for the parking brake to work? Sorry for the 20 questions but it is going on a jeep that I am building for my girlfriend and would like for her to have a parking brake. Thanks!

That is the right one. And Thanks!

More and more popular, they have been our best selling item since day 1 :D

These should always be the first thing you do when you are swapping a 14 bolt, go on a 100lb diet by losing the drums!

Got my brackets yesterday....they look great. I can't wait to put them on!! Thanks again.

After you get them on. I love pics of our stuff in use!

Pair of SRW 14bolt disc brake brackets shipped to 73072. Thanks!

Pair of SRW 14bolt disc brake brackets shipped to 73072. Thanks!
$51 delivered, use the PBB10 discount code when you checkout from our website...thanks!

Support! We can keep bringing out new products to go with the standards we have had you years only because of your support :D

Shipping the weekends' orders and getting loaded up for KOH at the same time....:D

We will have a crew here answering the phone and shipping while we are gone so don't worry...:smokin:

I am leaving to KOH in about an hour, we are not closing for any time. Someone will be answering the phone and 5 people will be here shipping while we are in JV. We will have 3 welders here also keeping production up. But I will not be answering posts' here til late Saturday....

In the meantime call our Sales (916.509.2242) line to get Ramsey, he can help plug in an order...

Do you have the 14 bolt SRW housing with DRW hubs brackets in stock?

Thanks

Do you have the 14 bolt SRW housing with DRW hubs brackets in stock?

Thanks

About 70 pair...:smokin:

Nice, I'm putting in my order right now.

Thanks

Thankyou!

Its time to get ready for summer, get on it!

and a whole bunch of those people have bought them and used them! Thanks for keeping these our number 1 seller!

The record is 106....getting there:D

No powdercoating! Just the best brake brackets made :)

Easy 3 hour job, getting stopping power!

Thanks for all the orders today! Just checking out Pirate for the first time since 9am....

Starting to look like a factory around here, 11 employees and counting! They all thank you for keepin them working :D

Another day in paradise! Back to work on that truck...

Damm! 65 degrees today in the sun, I can't play for a couple of weeks though, back to work, the phone is ringing!

Yes, they are good for that :D

Back in the mix, the first bent brackets and still the best price!

I was asked how many different brake brackets we make, 18 is the answer, 6 are weld on so that number could cover about 100 different axles....Try that for diversity!

We do have a few still to make, call us with sugestions...

Yes, that one could be a popular choice, I will get an axle and see.

quote for 14b brackets shipped to 38555 please

$51 delivered, same price for 4 years...never had to lower our prices to match the competition...priced fairly from day 1!

Hey Dan,
Spoke to you tonight about my Dodge Dana 60.

If you would please quote a set of weld ons for that Dana 60 and also I need a set bolt on adapters for a 14 Bolt FF Chevy.

And one more thing 2 spring perches for that Dana 60 as well....3 inch tube.

Do you take paypal ?

Shipped to 15037

Thanks again, Duane :D

Thats $130.20 delivered

ordered!

Thanks!

Thank you all for another record week!

And a busy weekend too, we have a crew come in Sunday afternoon to get a head start on the weekends orders...

Hey, Pirates back up, mostly!

Back in the mix!

These are still our best selling product, 4+ years after we introduced them!

Still the best, hands down!

And a Monday morning pop!

Thanks for the orders. I still can hardly believe how many people do this swap, the number is simply 20 times more than I ever thought it could be!

Always a keypoint when doing the swap! Over 200 pair in stock...:)

Man, I really do not like the rain! Someone make it stop!

Good time for working inside though and no better time than now to get started on your 14 bolt swap...:)

Or any swap, we make 18 different brake brackets and 6 are weld on's so you can do just about any axle!

Quick dumb ?.
I have a HO72 axle that was SRW.
I have converted to C&C hubs and the rotors have moved inward.
Which bracket do I need??

Is this it?

http://www.ruffstuffspecialties.com/catalog/14-bolt-disc-brake-bracket-cc-hubs-on-an-srw-axle-p-218.html

Quick dumb ?.
I have a HO72 axle that was SRW.
I have converted to C&C hubs and the rotors have moved inward.
Which bracket do I need??

Is this it?

http://www.ruffstuffspecialties.com/catalog/14-bolt-disc-brake-bracket-cc-hubs-on-an-srw-axle-p-218.html
I haven't tried that on an Eaton but if all things remain constant they should fit, the SRW brake brackets do but I don't have a set of Eaton C&C hubs to check.

Time to get it ready, summer is nearly here!

Another Monday almost through, keep calling, I'm here for another 25 minutes!

Not sure how I missed these for a month? The most popular item we make!

Do you make brackets for an '76 Bronco 9" big bearing? I'll be using late model Explorer disc calipers w/E brake.

Do you make brackets for an '76 Bronco 9" big bearing? I'll be using late model Explorer disc calipers w/E brake.
I don't right now. We do have an Explorer axle w/disc's on the rack though. Let me look at the caliper and see what it would take...

We have now made these for over 5 years. Thanks for all the orders over the years, it is getting to be truly an amazing amount of brake conversions!

A couple of new ones coming! Watch for'em...

Back in the mix!

Well, for those of us that don't get to play this weekend. get out in the shop and get some work done!

Our #1 seller of all time!

There is a reason its #1 too!

Time to get it together for your swap!

We answer the phone and ship orders Saturday, give us a call!

Keep those orders coming, 9 pair this weekend so far!

Another way too hot day in the big city...

Keep the orders coming! 9 pair today, seems like we may do a record on these.

Well, no record but still 10 pair out the door yesterday! Thanks for all the orders :)

All the kids should be out of school now, back to work!

Time to slow down, maybe even stop those big tires!

Still the best, the Original BENT brake bracket!

The best and easiest!

Adding another weld on bracket today!

Added the 3" tube, 11.75" rotor bracket...We will keep adding more as the demand for new keeps up!

We have been very busy this last 3 weeks, normally our sales slow when the kids start getting out of school. This year we just got busier so when you have a question please call, PM's & posts on threads may be a day till we see them...Thanks for keeping us so busy!

Another day almost in the bag. Just an hour left before I turn off the phones!

Back to work!

Just finished the BBQ, chicken & ribs, corn, potatos, no salad today because I was the cook! ;)

Ate leftovers all day! Thatnks to my BBQ skills at making way too much food!

Thanks for all the orders over the long weekend, back at it tommorrow :)

Another long day building the new website, glad I don't have to do everything, just write every description! 410 items is alot of descriptions...

I just recieved my 14 bolt brackets. Looks like a real nice piece, I can't wait to get home and install them. I will be doing business with your guys again.

Thankyou!

Keep those orders coming, we are on a record pace.

Thanks for a record July day!

Only the best!

After nearly 5 years these are still our most popular item (although the heims are catching up)!

And another hot weekend nearly over. Worked on a couple of new designs this weekend! Something new for us...Pics tommorrow!

Back in the mix, I should point out that we make 19 different brackets in all...These are the best seller's but we've got you covered...

The #1 selling part we have ever made ;) Thanks for all the orders over the years!

I just read some propaganda one of my competitors put out.

We have never had a bracket failure, ever! I would have heard about it if we had.

Thats all I will say.

Good morning! Time to stop...

The #1 disc bracket!

Keep the orders coming!

Another day! Thanks for all the work :)

Lots of new choices out there, no bugs to work out here and still just about the least expensive...

Stop not stopping!

Time to upgrade, start here!