High5
05-31-2006, 05:06 PM
i have a '99 vortec 350 that is currently wired to a jeep cj's under hood harness. i have modified the wiring to run a '96 computer to get rid of the VATS system. i bought this motor 4 years ago out of a wrecked '99 dually and it only had 15K miles on it when i bought it and it has been run in my trail only rig ever since. motor runs great and have never given me any issues. the motor comes complete with wiring, computer, both precat O2 sensors, post cat O2 simulator (so no cat's needed), K&N filter, and two sets of exhaust manifolds (stock and ram's horn styles) $1200
th400 with fresh internals, torque converter, lokar shifter, adapter that will allow a atlas or dana300 with a 32 spline (or 31 which ever the th400 comes with standard) input to boolt right up. also with this is another complete th400 with the torque converter and proper output shaft for the adapter but the case of the tranny is broken. $750
these parts are located in haslet texas and i will not ship.
th400 with fresh internals, torque converter, lokar shifter, adapter that will allow a atlas or dana300 with a 32 spline (or 31 which ever the th400 comes with standard) input to boolt right up. also with this is another complete th400 with the torque converter and proper output shaft for the adapter but the case of the tranny is broken. $750
these parts are located in haslet texas and i will not ship.