xj4life
06-02-2006, 01:44 PM
The axle will be available anytime after the end of June. I figured i'd post it now and give people some time to think about it. I had previously posted this axle for sale last fall but decided to keep it, this time its a done deal.
New Rotors, Calipers, Pads, Soft/Hard Lines
Detroit Locker
New Yukon 5.13’s
New Yukon Master Install Kit
New Flange-Yoke 1310 Adaptor
M.O.R.E Anti-wrap Leaf Spring Perches
M.O.R.E Shock Mounts custom ground for a ½” or so more clearance
Does not include u-bolts or u-bolt plates
Axle is setup for leaf springs and is currently still under my XJ until the end of June. This is a trailer-queen, trail-only jeep and has only seen 3 trail rides with no abuse. E-brake was never set up. The e-brake pads are missing and the linkage is very stiff. Probably just needs some loving, lube, and it will work (but I’m not promising anything). I added some bump stop towers to the axle but they can easily be taken off. Axle tubes have been welded to the housing. New seals on the axle tubes ends but bearings were not replaced. Spring perches are setup for an XJ with about 8” of lift and a SYE. I can get pinion angle if needed.
I’ve got just over $1300 into it and I’m looking to sell it for $1000. I’d like to sell it as a whole and I would be willing to deliver it free of charge within a few hours of Detroit, MI if the selling price is right. If buyer wants to pay freight i'll ship it.
I realize that it may not be the perfect setup for everyone. If I do not sell this within a few weeks I might think about parting it out. So if you see something you’re interested in let me know and I will get a hold of you if I decide to part it out.
These parts will be for sale if the axle buyer does not want to purchase them along with the axle:
Spare 8.8 Shafts $100
New Rotors, Calipers, Pads, Soft/Hard Lines
Detroit Locker
New Yukon 5.13’s
New Yukon Master Install Kit
New Flange-Yoke 1310 Adaptor
M.O.R.E Anti-wrap Leaf Spring Perches
M.O.R.E Shock Mounts custom ground for a ½” or so more clearance
Does not include u-bolts or u-bolt plates
Axle is setup for leaf springs and is currently still under my XJ until the end of June. This is a trailer-queen, trail-only jeep and has only seen 3 trail rides with no abuse. E-brake was never set up. The e-brake pads are missing and the linkage is very stiff. Probably just needs some loving, lube, and it will work (but I’m not promising anything). I added some bump stop towers to the axle but they can easily be taken off. Axle tubes have been welded to the housing. New seals on the axle tubes ends but bearings were not replaced. Spring perches are setup for an XJ with about 8” of lift and a SYE. I can get pinion angle if needed.
I’ve got just over $1300 into it and I’m looking to sell it for $1000. I’d like to sell it as a whole and I would be willing to deliver it free of charge within a few hours of Detroit, MI if the selling price is right. If buyer wants to pay freight i'll ship it.
I realize that it may not be the perfect setup for everyone. If I do not sell this within a few weeks I might think about parting it out. So if you see something you’re interested in let me know and I will get a hold of you if I decide to part it out.
These parts will be for sale if the axle buyer does not want to purchase them along with the axle:
Spare 8.8 Shafts $100