yota springs..?

[trucktittiesvagina]

ok so ive been lookin into a yj set up for a sammi and i have found out that they are 47inches long. all pro and marlin cralwer have yota springs that are 46 inchs has any one seen or done this themselves and does it work or am i just tryin to throw more yota stuff on a sammi then should be there

[szki272]

been done. they are shorter but have an offset pin. Here is some spring info for you.

http://www.4x4spot.com/misc__spring_information.htm

[trucktittiesvagina]

ok so how soft are they and do u kno if i ran a allpro 4inch lift spring in a spring over would that be too high or if not wat size tire could i run. im gonna be using tt hybrid axles down the road but stock for now.

[trucktittiesvagina]

come on some one should kno...

[zukidave]

Irun stock yota rears with just 3 leaves. Turn them around and they add 6 in" wheelbase Its on 36,s http://i2.photobucket.com/albums/y50/roktex/Project%20Super%20Frog/froggysideview.jpg

[trucktittiesvagina]

so if i just put the front of the spring in the back, basically flip it 180*? and it gives me 6 inches of wheel base?

[Orionn]

Thats prety much it. You will have fuel tank issues that will need to be addressed when you do that.

[catfish<><]

I run toy 2wd springs reversed in the rear with a couple leafs added, and toy 4wd spring reversed, schacle reverse, springs work very well, uses all of the 14" shock travel

bob

www.extremewheelers4christ.org

[trucktittiesvagina]

does any one run yota springs in front too or are u jsut runnin em flipped in the rear

[catfish<><]

the 4wd springs are in the front on my rig(sorry i'm not very good with the keyboard thing)

bob

www.extremewheelers4christ'org

[trucktittiesvagina]

hey do u know if i do a yj conversion, with a shackle reversal in front could i run super flex yota front springs all around or would that be a waste and would it even work with the yj stuff

[trucktittiesvagina]

some one otta kno