so after looking at lift springs for my ramcharger and seeing how much they were i was wondering if i could use 6 inch chevy springs in the front of my 1985 ramcharger . im planning on going with the shakle flip and a two inch block in the rear

thanks for any info

i had the same problem with my 77 ramcharger I used a 4 inch out of a blazer but i kept the top spring on when i did the swap you could take your spring pack off and measure the distance to see if it matches up but it worked for me just to replace the lower springs you might loose 1/2 an inch of lift for compensating in spring arch