another camper / Trailer

[nbjeeptj]

http://www.pirate4x4.com/forum/attachment.php?attachmentid=248687&stc=1&d=1149680235



i built this rig to use the camper i already had with a lot of help from Nitekrawler from this fourm

[Ken Carter / BRUISER]

Nice did ya build the trailer also???

[weedwacker]

almost looks like mine.

[RustoleumWhite]

I apreate the work, and it looks very functional, but as it sits in the pic it also looks super getto!

Filling in the wheel-well hole on the [camp] trailer and maybe even skirting down too/below the frame-line of the [main] trailer with the same, white camper siding material would blend it all together much better.


But I'm jealous of the nice 3-axle bumper pull... :beer:

[nbjeeptj]

yea as it sits in the photo it was not complete still have to fill in the wheel well space, secure camper to trailer make ramps and wire trailer nitekrawlers rig has the wheelwells filled in with painted white sheet metal and it looks nice

[X-Rated]

what size campers are you using?

[nbjeeptj]

mine is a 18' expandable it has a 14' box with beds that fold out of each end like the beds on a pop up

[rockcrawln]

Nice setup... how long is the trailer?

[X-Rated]

so 14 foot cab, 4 foot tounge makes 18 feet, and you need at least 14 feet for a TJ so that puts you at 32-33 feet total on a bumper pull...

DAMN. That must be a bitch to manuver and move arround. I almost got a 28 footer to put a 12' cab on it with 16 foot deck, too expensive, but also I worried about being able to move it, park it, back it

[4x4not]

Looks like a decent setup, but I'm MUCH rather have a gooseneck for that kinda length and load.

[nbjeeptj]

it is about 33' from end to end it pulls great it is a little tricky to get turned around in a tight spot I would have built a goose neck but due the the fold out beds on my camper i would have had to have the camper up so high that i decided to go with tag along style trailer.

[Hero]

What is your tow rig?

[nbjeeptj]

i have a 2001 chevy 2500hd gas 6.0 tow rating 10500 lb,s will probably get a one ton soon

[Kyron]

how bad is the toung weight without the jeep on??

[NiteKrawler]

I apreate the work, and it looks very functional, but as it sits in the pic it also looks super getto!

Filling in the wheel-well hole on the [camp] trailer and maybe even skirting down too/below the frame-line of the [main] trailer with the same, white camper siding material would blend it all together much better.


But I'm jealous of the nice 3-axle bumper pull... :beer:


...wow, directly after a posted pic of a camper with no wheels strapped down to a gooseneck, you called this rig "super-getto"...:rolleyes: , oh well, you must have liked it a little, you did give a Cheers! :flipoff2: