well i been collecting axles and parts. I decided i need to go to full one ton axles sothese will not work after all. the first is
1# chevy 6 bolt Dana Solid 44 it is complete drive flange to drive flange. It is missing one drive flange cover. the gears are open and 3.73. the calipers and rotors are still on the axle. This was out of a full size 1983 Blazer.
http://www.supermotors.org/getfile/312435/fullsize/axle3.jpg (http://www.supermotors.org/vehicles/registry/showmedia.php?id=312435&original=1)
http://www.supermotors.org/getfile/312437/fullsize/axle4.jpg (http://www.supermotors.org/vehicles/registry/showmedia.php?id=312437&original=1)
2# this is a Dana 60 full floater out of a ford 4x2. It is complete drum to drum. the spring pad is 40" on center and the WMS-WMS is 63" the diff is open and 3.73. the spline count is 15.
http://www.supermotors.org/getfile/332798/fullsize/dana604.jpg (http://www.supermotors.org/vehicles/registry/showmedia.php?id=332798&original=1)
http://www.supermotors.org/getfile/332799/fullsize/dana603.jpg (http://www.supermotors.org/vehicles/registry/showmedia.php?id=332799&original=1)
$150
i running a full size Bronco with 40"X17" and these would kill these axles so i am searching for adana 70 or most likely a GM corporite 14 Bolt and a solid Dana 60 for the front end. I am open to trades or offers.
mike
my work email is michael.d.collins@intel.com
thank you for looking thru this add.