PDA

View Full Version : "BACKBONE" truss system.

DIY4X
06-10-2006, 08:42 AM
This is a 100% bolt on truss system for your 14BFF. This adresses the issue of flexing the tubes and eventually cracking loose the spot welds holding the axle tubes in place. So if your pounding your rig hard, give it some "BACKBONE!"

Guardsman sold seperately. These were updated to the website this morning.

http://diy4x.com/cart/index.php?route=product/category&path=18

Truss pricing $195.00. Customization handled case by case.
DIY4X
06-13-2006, 07:58 AM
Starting to recieve alot of orders for these so get in now if your lookin to add one of these to your rig!
DIY4X
01-07-2009, 07:34 PM
Top
DIY4X
01-18-2009, 11:10 AM
Now also being built to weld directly to the axle tubes! Just one more option for you:grinpimp:
DIY4X
01-29-2009, 07:08 PM
Top
DIY4X
03-29-2009, 11:22 AM
Up
DIY4X
04-08-2009, 06:19 PM
bump
seniorxj
04-13-2009, 09:23 AM
Can you do other axles like the ford 8.8 or a front HP d30???
DIY4X
04-19-2009, 05:13 PM
Can you do other axles like the ford 8.8 or a front HP d30???

I'm not extremely familiar with all of the axles out there.

We need something to bolt into on the front side. We have done some experimentation with other types of attachment on the pinion side of the axle and so far have no good solutions.

We'll continue to work toward a solution as soon as demand slows up a bit.
DIY4X
05-19-2009, 08:48 PM
Top
DIY4X
07-08-2009, 09:13 AM
Top
DIY4X
08-06-2009, 06:34 AM
Top
DIY4X
08-28-2009, 05:22 PM
Top!
DIY4X
08-31-2009, 06:13 PM
Customer testimonial,

I purchased the Wraptor System for the 14BFF in the rear of my Jeep. Kert I and spoke at length as I put into words what I needed, the system had to go off the non-typical side for his system which made it an odd-ball build. He also made some altercations to the crossover bar (again to fit my special build). The result was a very fast delivery, awesome quality, great fit - Every expectation was surpassed!

Jeff Allen, Mishawaka IN
Michiana Jeep Club - member!
DIY4X
10-25-2009, 08:09 PM
Thanks for the orders!
DIY4X
11-11-2009, 03:48 PM
Couple more backbones shipped out today. If you had ordered one for a 4 link setup it is on its way!