acprokeith
06-11-2006, 08:20 PM
rollover sale lots of stuff / parts needed for buggy
--------------------------------------------------------------------------------
. I JUST ROLLED THE BLAZER HARD. its done, so the front bumper is for sale for $300, rock sliders for $150, np 203 welded to a th 350 w- adapter for free. the front bumper- sliders are rollover proof. the bumper will accept any winch you can find as it was designed to pull semi's out of ditches. it has a reciever hitch in the center of the winch plate to mount the winch, or you can just mount it to the plate. this bumper goes all the way back to the engine crossmember with bracing, so ill just hack off the frome at the crossmember and who ever buys it can either cut it off that chunk of frame and weld it on, or section it into their frame. i also have some long travel tube shock towers that go way up in the fenders to mount 16" travel shocks $100. the driver one is notched to clear the steering shaft. i have a th350 floor shifter thats linkage operated $20. glove box inside plastic thing (the one everyone needs but the yards dont have) $15. 1 side mirror $10. ive got 2 full windows and 1 sliding. 2 tops in good shape. i dont have pics of the top, but it looks like any other. 1 set of 8" lift springs $350. 2 front 6" springs $175. i still have the 37x16.5 goodyear mt's $75. and the 38.5x14x15 swamper sx's $500. my custom bent 3" pipe snorkel w/ arb top (all the way to the aircleaner) $125. the top costs $65 by itself, and i spent another $50 to get the guys at the muffler shop to bend it up for me. it is rollover proof too, .
I will trade any of this stuff for stuff to build my buggy. im gonna need race seats x 2, harnesses x 5, and a whole bombload of tube. i also need a set or 2 of 52" stock springs/ and alot of wiring and swithces/ fuseblock also. maybe some 3/8 winch rope, a few electric fans, a white face fuel gauge and volt gauge, a 205 shifter, a psc 2wd box and pump, a premier power onboard , a tpi 350 fuel injection system complete, brake line locks x 2, some 4" rear shackle flip brackets, zero rates x 2, a stock 85-89 grill, and some stuff i havent thought about yet. i will update this thread as i need stuff, check back often. thanks im gonna get back to sawzall 'n.
__________________
--------------------------------------------------------------------------------
. I JUST ROLLED THE BLAZER HARD. its done, so the front bumper is for sale for $300, rock sliders for $150, np 203 welded to a th 350 w- adapter for free. the front bumper- sliders are rollover proof. the bumper will accept any winch you can find as it was designed to pull semi's out of ditches. it has a reciever hitch in the center of the winch plate to mount the winch, or you can just mount it to the plate. this bumper goes all the way back to the engine crossmember with bracing, so ill just hack off the frome at the crossmember and who ever buys it can either cut it off that chunk of frame and weld it on, or section it into their frame. i also have some long travel tube shock towers that go way up in the fenders to mount 16" travel shocks $100. the driver one is notched to clear the steering shaft. i have a th350 floor shifter thats linkage operated $20. glove box inside plastic thing (the one everyone needs but the yards dont have) $15. 1 side mirror $10. ive got 2 full windows and 1 sliding. 2 tops in good shape. i dont have pics of the top, but it looks like any other. 1 set of 8" lift springs $350. 2 front 6" springs $175. i still have the 37x16.5 goodyear mt's $75. and the 38.5x14x15 swamper sx's $500. my custom bent 3" pipe snorkel w/ arb top (all the way to the aircleaner) $125. the top costs $65 by itself, and i spent another $50 to get the guys at the muffler shop to bend it up for me. it is rollover proof too, .
I will trade any of this stuff for stuff to build my buggy. im gonna need race seats x 2, harnesses x 5, and a whole bombload of tube. i also need a set or 2 of 52" stock springs/ and alot of wiring and swithces/ fuseblock also. maybe some 3/8 winch rope, a few electric fans, a white face fuel gauge and volt gauge, a 205 shifter, a psc 2wd box and pump, a premier power onboard , a tpi 350 fuel injection system complete, brake line locks x 2, some 4" rear shackle flip brackets, zero rates x 2, a stock 85-89 grill, and some stuff i havent thought about yet. i will update this thread as i need stuff, check back often. thanks im gonna get back to sawzall 'n.
__________________