I was thinking about buying one of these for my TJ. But, I was also thinking of running 2.5 rockwells, so the pumpkin will be in the middle front and back. With this T-case work for that.

Thanks

Some people are doing this and mounting the 200 with the outputs pointing down (think of a Dana 18 rotated so the passenger side outputs are now straight down and the drive shafts are centered). It only works if you have a TON of lift. I don't know how you could make the shift linkage work, but its been done. The 200s are prone to overheating if you run them at highway speeds for any length of time (at least the ones from M715s are).