|
660KP 06-14-2006, 08:04 PM Hi! Im new here with a question about my 92 YJ crawler. It has some hood damage I would like to get repaired and while in the process am considering some type of cowl induction setup to help evacuate some of the hot air generated by the LT1. Any recommendation? I am not beyond replacing the entire hood cause it does have some pretty bad damage. Thanks! rockinjeep 06-18-2006, 07:01 AM Hi! Im new here with a question about my 92 YJ crawler. It has some hood damage I would like to get repaired and while in the process am considering some type of cowl induction setup to help evacuate some of the hot air generated by the LT1. Any recommendation? I am not beyond replacing the entire hood cause it does have some pretty bad damage. Thanks! Check this link: http://www.fiberglass-hood.com/ They have fiberglass hoods w/ the cowl for Yj's, but you wiil need to cut a opening for cowl Or check Polyperformance: http://www.polyperformance.com/shop/home.php One thing I did if you don't want to spend YO MO Is get some hood louvers: http://www.raceace.com/home.html and fix you'r hood, depending on the damage, or just spend the money and get the fiberglass:D 660KP 06-18-2006, 10:03 AM Thanks for the input. I have not considered louvers. After looking at that website I think that may be the route I take. Thanks, KP rockinjeep 06-18-2006, 11:50 AM the louvers look alot better then a cowl in my opinion and look more factory on the hood Good luck Mike- | |