went to Ace hardware and picked up 6 washers that fit snugly in the cap.installed 3 per side on top of the spring.WOOOOOOT:flipoff2:

Assuming a front D60?

Hi, I'm curious exactly where did you place the washers, I have really bad wobble, I'm running a D60

probably under the spring cap on the kingpin. The washers push down harder on the spring/kingpin bushing.

probably under the spring cap on the kingpin. The washers push down harder on the spring/kingpin bushing.


yes I placed them on top of the springs between the cap and spring.I can not believe the difference.drives like a new truck.

Wow i never thought of that working..but does it work with highsteer cross over arms?? I have the sky manufacturing cross over kit and i noticed that my drive side tire moves in and out on the knuckle about a 1/4 '' but the passenger side is tight as a nuns cooter..

did you notice an increase in the turning efferot or lack of return to center?? i did this to mine and 2 washers would steer like a boat with no return to center and 1 was still a noticable difference. i used some moster washers that just barely fit in the cap and not all the way in leaving a slight gap at the top.

no works perfect.returns.less effort.(hydroboost)