Full Size Dana 44 and Ford 9" Rebuilt Gears and Spools

[JRATOFFROAD "TheRat"]

One time only. I have a set of axles that I built for a guy that never paid me for them. I need to get out what I have in them. The front is a Dana 44 out of a Chevy truck with the 1/4 wall tubes ($200) and 30 spline axles. It has brand new Yukon 4.56 gears($150), Master install kit (Timkin Bearings) ($115), Full Spool ($145). I have everything for it but hubs and rotors which I can get to match the rear at 5x5.5 lug pattern. The rear is a Ford 9" out of a 78 Ford F150 ($150) and has 31 splines. It also has Brand New Yukon 4.56 gears ($175), Master Install Kit ($125), Full 31 spline spool ($135). It is Complete with 5x5.5 lug and I have new Timken axle bearings and seals ($50). I would just like to get what I have in these in the parts. I charge $300 labor in most cases per axle to set these up but I'm gonna take that out because I need to get rid of these. I have $1245 in the axles and parts but I'll take $1150 for the set. These are about 66" wheel mount to wheel mount. I'm out of Lamar, CO 81052. You can email me at jasonratcliff@jratoffroad.com or jrat_007@hotmail.com or give me a call at 719-688-6800. I'm gonna also get some pictures so I should have them by the middle of the week Thanks Jason Ratcliff JRATOFFROAD
http://www.pirate4x4.com/forum/attachment.php?attachmentid=241119&stc=1&d=1145669486
http://www.pirate4x4.com/forum/attachment.php?attachmentid=241120&stc=1&d=1145669486
http://www.pirate4x4.com/forum/attachment.php?attachmentid=241121&stc=1&d=1145669486
http://www.pirate4x4.com/forum/attachment.php?attachmentid=241123&stc=1&d=1145669486
http://www.pirate4x4.com/forum/attachment.php?attachmentid=241122&stc=1&d=1145669486

[JRATOFFROAD "TheRat"]

Anyone? $900 plus shipping

[Halogrinder]

ill buy the gears and what not out of them. im looking for 4.56's f/r. already have the axles

[JRATOFFROAD "TheRat"]

$850 anyone? Thanks Jason Ratcliff

[Benzz0]

if they were 5.13's at that price and shipped I would take them off your hand :D