What different models of divorce IH cases were used? I know of the 205's but was there ever anything else? I am building a free 2-wheel Ford into a 4-wheel with a divorce t-case, and a chevy front end. I called a place in town that has 2 IH divorce cases, but they didn't know what models they were. I can't get over there for a few days to see if they are 205's. Thanks for any help.

Brian

Some of the older models had an NP 200 or 202 or something like that. Basically an older version of the NP205

yup 200 202 205

the 200 and 202 are stronger then the 205

I suppose these are similar weight to the 205. Do you guys know what the low range is? And are they regular 1310 yokes? Thanks for the quick reponse.

205 low range is 1.96 or so.
202/200 is 2 to 1, I think.

IIRC, the 202/200 is about 20-30 lbs heavier.

Brian, Lemme know if you need help, I'm in your neck or the woods.

The Mick,
Good to see someone else from around Rapid. What do you drive, and what trails do you do around the hills? I am at school in Brookings right now. I am getting the Ford right after final, then I will be home. I am going to go to the IH place here in Brookings tommorrow. He has got tons of IH axles, trannies, cases etc, and knows all the info on it. Good old guy to talk to.

Originally posted by The Mick
205 low range is 1.96 or so.
202/200 is 2 to 1, I think.

IIRC, the 202/200 is about 20-30 lbs heavier.

Brian, Lemme know if you need help, I'm in your neck or the woods.



corection


the 200/202 have the same low range as the 205:(

Chief,
Thanks.

Brian, I'm currently working on a 77 Terra. lemme know when you get back.

Mick,
I will be back in the first part of May, and I have 2 weeks to get ready for the UROC event in Cedar city. A little body work and some practice. What are you doing to the Terra?

right now, I'm replacing what the rust monster ate: body mounts,complete floors,all rockers &extensions. Thats just the structural stuff :(:( also putting new quarters on, since its all tore apart.
That should be done in a couple weeks, then it'll be time to get rid of those lame ass 30x9.50's and the inverted springs. :D :D

Originally posted by The Mick
right now, I'm replacing what the rust monster ate: body mounts,complete floors,all rockers &extensions. Thats just the structural stuff :(:( also putting new quarters on, since its all tore apart.
That should be done in a couple weeks, then it'll be time to get rid of those lame ass 30x9.50's and the inverted springs. :D :D

Gee, y'know I just cut up a decent Traveler tub 3 years ago.. you shoulda said something. ;)

Got plans for Memorial Day weekend, Matt? I'm heading to Wyoming... :D

Tom, we *might* try and make that race, If for no other reason than the Terra will be back together. It's in Powell, right??

Originally posted by The Mick
Tom, we *might* try and make that race, If for no other reason than the Terra will be back together. It's in Powell, right??

Yep, the great dusty alkalye flats of Powell, WY. :D

While you're there, don't lick your lips, or open your mouth for long... ;)

Tom, BTDTGFT.

I'm from the Great American Desert, remember???