HEY :flipoff2:

Looks good. Now go grind it into some rocks to see how it holds up!

ok alex sure will, wish you were around for this weekends trip to redbird :flipoff2:

Looks sorta like a SG now.
Time to see if it bends like one...

I think that is the best ARB trim job I have seen. If you haven't done this already, you should make it so that it bolts up vertically also to keep it from rotating.

a few more pics for u goons

Are you sure you want to yank from that trailer tiedown eyelet you have welded to your bumper? I can see that tearing out and killing someone on a serious pull with a snatch strap.

relax its only job is hang onto that heavy ass hook when not in use .......:shaking:

ps they came from the industial rigging shop ratted @ 12K lbs or so such not that it matters I don't use it for winching on

but thanks for the concern
afi

I'm not sure that the ring on the bumper is at least as strong as the lugs that ARB puts on the bottom of the bumper.

(I'll be sure to stay out of the way of the flying hook)

PT

as long as your welds are good it should be fine for winching. I was talking about using the rubber band.