chicoman4x4
06-26-2006, 08:46 PM
This 89 5.0 H.O was pulled from a cmc race car. the rules say stock engine, so this is the best of all stock part. This car only ran one play day, it's ready to run.
*block- mag, hot tanked, new cam bearings, zero decked, line borded, torque plate honed
*crank was polished and balanced
*turned flywheel
*rods- resided, shot peened, ARP bolts
*piston- factory forged pistons (trw)
*ring- speed pro file fit moly
*bearings- clevite77 rod, mains, cam
*oil pump- milling pump new pickup
*windage tray
*billet timing set
*ARP main bolts
*corba roller cam
*fms roller lifter
*fms push rods
*fms roller rockers
*gt40 valve spring kit (spring, keeper, retainer)
*ARP head studs
*felpro race head gaskets
*heads are ported with a 3 angle valve job
*stock intake that has been pored by extrude hone
*fms 19lb injectors
*adjustable fuel regulator
*custom programed computer chip (open loop only no smog)
*custom wire harness
*all pulley bracket everything you need to put in
*all part are new, this engine has no more then 5 hours of run time
*to much to list, over $3500 in parts
* $1500 obo
you can call me for more info (530) 354-0630 Brandon
*block- mag, hot tanked, new cam bearings, zero decked, line borded, torque plate honed
*crank was polished and balanced
*turned flywheel
*rods- resided, shot peened, ARP bolts
*piston- factory forged pistons (trw)
*ring- speed pro file fit moly
*bearings- clevite77 rod, mains, cam
*oil pump- milling pump new pickup
*windage tray
*billet timing set
*ARP main bolts
*corba roller cam
*fms roller lifter
*fms push rods
*fms roller rockers
*gt40 valve spring kit (spring, keeper, retainer)
*ARP head studs
*felpro race head gaskets
*heads are ported with a 3 angle valve job
*stock intake that has been pored by extrude hone
*fms 19lb injectors
*adjustable fuel regulator
*custom programed computer chip (open loop only no smog)
*custom wire harness
*all pulley bracket everything you need to put in
*all part are new, this engine has no more then 5 hours of run time
*to much to list, over $3500 in parts
* $1500 obo
you can call me for more info (530) 354-0630 Brandon