im trying to find the relay to do the fast flasher fix for my led tail lights on a 2001 tj
but radioshack in canada doesnt carry them anymore
i was wondering if anyone knew of anywhere else i can get that relay?
the tech guys at poison spyder said napa carriers one but they dont know the part number?

check this link out,, it might help,, i know the talked about installing a resistor in here somewhere..

http://www.4x4xplor.com/ORO-LiteDOTs.html

Napa part # ep26

You need a no load flasher

Check this link:

http://www.pirate4x4.com/forum/showthread.php?t=448539&highlight=led+flasher

I had the same problem on a 2001 TJ. I installed an EP-27 flasher, designed for use with 2-6 LEDs and it did not cure the problem. The EP-27 flasher has a five pin connector, the same as the 2001 TJ, whereas the EP-26 uses a different 4 pin style. The EP-27 flasher caused the hazard lights to work correctly, but when the turn signals were used, it created a short through the flasher, and will blow a fuse if not immediately turned off. Although the resistor idea is lame, it does fix the problem and with the proper resistor mounted in a heat sink, heat is not an issue. The modification to the stock flasher may work, but the layout of the circuit board (in the pic posted by Haole in a previous link) is different than the one in my flasher. There are heavy duty electronic flashers available from Jeep/Chrysler that are supposed to fix the problem, but I have yet to try one.