I've read that their is a difference in D44 carriers. And that one carrier will only go up to 3.92 and the other carrier will go 3.92 and UP! I just want to make sure this is the case because i have a 3.50 gears in a D44 and i'll need to look for a 4.10 case.

Then in my serarch i found this

"The only difference between RC and Standard Cut diffs are the gears, not the carriers. "

Is this true?

And isn't Reverse cut the same as Reverse Rotation?

And Reverse rotation the same as High Pinion?

Just tryin to clear things up.

Thanx

check out the BIBLE on the POR welcome page. it's under the tech section. PM me if you have any 'questions'.

;)

russel

The Pirate Bible does not metion the differeance in D44 Carriers. if I happed to overlook it please quote it for me.

Dana 44
3.73 and down
3.92 and up

all the carriers are the same
H/P = R/C or R/R

thank you