i heard that this combo can be done.
does any body have fact/tech article/pics on it?
does anybody have an exp. view of the 241?
thank,
laredo:smokin:

I assume you mean using the 241 planetary to build a crawler box. Here is a good link. I have one done, and am almost finished with another. It is easier to build a new housing if you have a mill and a lathe.

http://www.bc4x4.com/tech/bryce/tcase/tcase.cfm

wow....that's a damn good idea..that article si key!...if I run into a 241 I may have to start fawkin w/ it :D

you are the best.
now here is a thought -
take the SYE kit to the 241 and gain 6 inches.
put another 231 in front of your 241 and you lose 6 inches.
which means that you get anothe t case without losins an inch....
laredo:smokin:

Originally posted by laredo
you are the best.
now here is a thought -
take the SYE kit to the 241 and gain 6 inches.
put another 231 in front of your 241 and you lose 6 inches.
which means that you get anothe t case without losins an inch....
laredo:smokin:

Laredo,

you are a sick m.f. $hit for a brain maniac and i'm gonna
kick your fat a$$ once i get the chance to do so:flipoff2: :rasta:

WTF did you mean by this weird idea of yours with 6" here and
6" there? do'nt you know you have to come to me with any new
"idea" you've got?!!

i did'nt know that a 231 is 6" long:eek:

one other thing - if you don't get me a [SIZE=4]sponsor[SIZE=4]

real quick, you're a dead fuck-duck:nuke: :nuke:

matai ata magiaa elai lamisrad?
bo machar, neshev ktsat venelech leechol ochel tov:)

lehit ya manyuk shekamocha:beer:

laredo,
The SYE kits only gain you 4 inchs. The box is 6 1/4" long. The rear drive shaft will need to be shortened about 2 inchs, and the front lenghtened about the same. I tried everything I could to make mine shorter, but it is impossible without custom internal parts. I will post a couple of pics when I am done with the new one and I figure out how to post them.