is there a left and right radius arm ?
it looks like there a little different but does it really matter ?
yea i stared at them for a long time and came to the conclusion there is ,but it dont matter :smokin:

far as I know they're all the same, but also all different.

I believe all the holes are drilled, then the arm is cut, so sometimes the c-bushing caps don't line up too well.

BTW, do a search next time :flipoff2:

I was wondering that the other day when I took mine off the POS. So, just for shits and grins:flipoff2: I am keeping them right where I took them off from. Why? Cause I fawkin can, thats why...

Your just worried your 235's are gonna have uneven wear ya puss:flipoff2: :D :D

They are the same, left and right. The book will tell you not to mix the cap's but you can. The only thing you have to watch is the hole spacing on top where the coil bucket bolts in. Some of the F trucks have a wider spaced bolt. You can use them on an EB or whatever just make sure the arm and the cap have hole spacing that will mate up to the bucket's you have.

Where is the difference in the holes? Is it at the forward side of the C? Meaning could you use FS arms with the C from Duff?

The difference in the fullsize arms would be on the top, where the coil retainer bolts go

Originally posted by Nobody
The difference in the fullsize arms would be on the top, where the coil retainer bolts go

Yup, i wish i took a pic, the Fullsize arms holes ar about 1/4 to 1/8 on an inch wider then the EB arms, so you just re drill the coil pads on either and it will work

i was messin around today and there is a slight diff. from left to right ,ill get pics but if ya put a left end cap on a right side arm they dont line up about 1/4 inch. off

now i dont think it matters what side they go on but the caps are specific to the arms :D :eek: